1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
|
// ADC functions on N32G45x
//
// Copyright (C) 2022-2023 Alexey Golyshin <stas2z@gmail.com>
//
// This file may be distributed under the terms of the GNU GPLv3 license.
#include "board/irq.h" // irq_save
#include "board/misc.h" // timer_from_us
#include "command.h" // shutdown
#include "compiler.h" // ARRAY_SIZE
#include "generic/armcm_timer.h" // udelay
#include "gpio.h" // gpio_adc_setup
#include "internal.h" // GPIO
#include "sched.h" // sched_shutdown
#include "n32g45x_adc.h" // ADC
DECL_CONSTANT("ADC_MAX", 4095);
#define ADC_TEMPERATURE_PIN 0xfe
DECL_ENUMERATION("pin", "ADC_TEMPERATURE", ADC_TEMPERATURE_PIN);
static const uint8_t adc_pins[] = {
// ADC1
0, GPIO('A', 0), GPIO('A', 1), GPIO('A', 6),
GPIO('A', 3), GPIO('F', 4), 0, 0,
0, 0, 0, 0,
0, 0, 0, 0,
ADC_TEMPERATURE_PIN, 0, 0, 0,
0, 0, 0, 0,
0, 0, 0, 0,
0, 0, 0, 0,
// ADC2
0, GPIO('A', 4), GPIO('A', 5), GPIO('B', 1),
GPIO('A', 7), GPIO('C', 4), GPIO('C', 0), GPIO('C', 1),
GPIO('C', 2), GPIO('C', 3), GPIO('F', 2), GPIO('A', 2),
GPIO('C', 5), GPIO('B', 2), 0, 0,
0, 0, 0, 0,
0, 0, 0, 0,
0, 0, 0, 0,
0, 0, 0, 0,
#if CONFIG_MACH_N32G455 // ADC3/4 for G455 only
// ADC3
0, GPIO('B', 11), GPIO('E', 9), GPIO('E', 13),
GPIO('E', 12), GPIO('B', 13), GPIO('E', 8), GPIO('D', 10),
GPIO('D', 11), GPIO('D', 12), GPIO('D', 13), GPIO('D', 14),
GPIO('B', 0), GPIO('E', 7), GPIO('E', 10), GPIO('E', 11),
0, 0, 0, 0,
0, 0, 0, 0,
0, 0, 0, 0,
0, 0, 0, 0,
// ADC4
0, GPIO('E', 14), GPIO('E', 15), GPIO('B', 12),
GPIO('B', 14), GPIO('B', 15), 0, 0,
0, 0, 0, 0,
GPIO('D', 8), GPIO('D', 9), 0, 0,
0, 0, 0, 0,
0, 0, 0, 0,
0, 0, 0, 0,
0, 0, 0, 0,
#endif
};
// Perform calibration
static void
adc_calibrate(ADC_Module *adc)
{
adc->CTRL2 = CTRL2_AD_ON_SET;
while (!(adc->CTRL3 & ADC_FLAG_RDY))
;
adc->CTRL3 &= (~ADC_CTRL3_BPCAL_MSK);
udelay(10);
adc->CTRL2 = CTRL2_AD_ON_SET | CTRL2_CAL_SET;
while (adc->CTRL2 & CTRL2_CAL_SET)
;
}
struct gpio_adc
gpio_adc_setup(uint32_t pin)
{
// Find pin in adc_pins table
int chan;
for (chan=0; ; chan++) {
if (chan >= ARRAY_SIZE(adc_pins))
shutdown("Not a valid ADC pin");
if (adc_pins[chan] == pin)
break;
}
// Determine which ADC block to use
ADC_Module *adc;
if ((chan >> 5) == 0)
adc = NS_ADC1;
if ((chan >> 5) == 1)
adc = NS_ADC2;
if ((chan >> 5) == 2)
adc = NS_ADC3;
if ((chan >> 5) == 3)
adc = NS_ADC4;
chan &= 0x1F;
// Enable the ADC
uint32_t reg_temp;
reg_temp = ADC_RCC_AHBPCLKEN;
reg_temp |= (RCC_AHB_PERIPH_ADC1 | RCC_AHB_PERIPH_ADC2 |
RCC_AHB_PERIPH_ADC3 | RCC_AHB_PERIPH_ADC4);
ADC_RCC_AHBPCLKEN = reg_temp;
reg_temp = ADC_RCC_CFG2;
reg_temp &= CFG2_ADCPLLPRES_RESET_MASK;
reg_temp |= RCC_ADCPLLCLK_DIV1;
reg_temp &= RCC_ADCPLLCLK_DISABLE;
ADC_RCC_CFG2 = reg_temp;
reg_temp = ADC_RCC_CFG2;
reg_temp &= CFG2_ADCHPRES_RESET_MASK;
reg_temp |= RCC_ADCHCLK_DIV16;
ADC_RCC_CFG2 = reg_temp;
ADC_InitType ADC_InitStructure;
ADC_InitStructure.WorkMode = ADC_WORKMODE_INDEPENDENT;
ADC_InitStructure.MultiChEn = 0;
ADC_InitStructure.ContinueConvEn = 0;
ADC_InitStructure.ExtTrigSelect = ADC_EXT_TRIGCONV_NONE;
ADC_InitStructure.DatAlign = ADC_DAT_ALIGN_R;
ADC_InitStructure.ChsNumber = 1;
ADC_Init(adc, &ADC_InitStructure);
adc_calibrate(adc);
if (pin == ADC_TEMPERATURE_PIN) {
NS_ADC1->CTRL2 |= CTRL2_TSVREFE_SET;
VREF1P2_CTRL |= (1<<10);
} else {
gpio_peripheral(pin, GPIO_ANALOG, 0);
}
return (struct gpio_adc){ .adc = adc, .chan = chan };
}
// Try to sample a value. Returns zero if sample ready, otherwise
// returns the number of clock ticks the caller should wait before
// retrying this function.
uint32_t
gpio_adc_sample(struct gpio_adc g)
{
ADC_Module *adc = g.adc;
uint32_t sr = adc->STS;
if (sr & ADC_STS_STR) {
if (!(sr & ADC_STS_ENDC) || adc->RSEQ3 != g.chan)
// Conversion still in progress or busy on another channel
goto need_delay;
// Conversion ready
return 0;
}
// ADC timing: clock=4Mhz, Tconv=12.5, Tsamp=41.5, total=13.500us
ADC_ConfigRegularChannel(adc, g.chan, 1, ADC_SAMP_TIME_41CYCLES5);
adc->CTRL2 |= CTRL2_AD_ON_SET;
adc->CTRL2 |= CTRL2_EXT_TRIG_SWSTART_SET;
need_delay:
return timer_from_us(20);
}
// Read a value; use only after gpio_adc_sample() returns zero
uint16_t
gpio_adc_read(struct gpio_adc g)
{
ADC_Module *adc = g.adc;
adc->STS &= ~ADC_STS_ENDC;
adc->STS &= ~ADC_STS_STR;
adc->CTRL2 &= CTRL2_EXT_TRIG_SWSTART_RESET;
uint16_t result = adc->DAT;
return result;
}
// Cancel a sample that may have been started with gpio_adc_sample()
void
gpio_adc_cancel_sample(struct gpio_adc g)
{
ADC_Module *adc = g.adc;
irqstatus_t flag = irq_save();
if (adc->STS & ADC_STS_STR)
gpio_adc_read(g);
irq_restore(flag);
}
|
