blob: 275d397290b4ba9aa24df4fd3f81c8b62617234d (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
|
# lpc176x build rules
# Setup the toolchain
CROSS_PREFIX=arm-none-eabi-
dirs-y += src/lpc176x src/generic lib/lpc176x/device
CFLAGS += -mthumb -mcpu=cortex-m3 -Ilib/lpc176x/device -Ilib/cmsis-core
CFLAGS_klipper.elf += --specs=nano.specs --specs=nosys.specs
CFLAGS_klipper.elf += -T $(OUT)src/generic/armcm_link.ld
$(OUT)klipper.elf: $(OUT)src/generic/armcm_link.ld
# Add source files
src-y += lpc176x/main.c lpc176x/gpio.c
src-y += generic/armcm_boot.c generic/armcm_irq.c generic/armcm_timer.c
src-y += generic/armcm_reset.c generic/crc16_ccitt.c
src-y += ../lib/lpc176x/device/system_LPC17xx.c
src-$(CONFIG_HAVE_GPIO_ADC) += lpc176x/adc.c
src-$(CONFIG_HAVE_GPIO_I2C) += lpc176x/i2c.c
src-$(CONFIG_HAVE_GPIO_SPI) += lpc176x/spi.c
src-$(CONFIG_USBSERIAL) += lpc176x/usbserial.c generic/usb_cdc.c
src-$(CONFIG_SERIAL) += lpc176x/serial.c generic/serial_irq.c
# Build the additional bin output file
target-y += $(OUT)klipper.bin
$(OUT)klipper.bin: $(OUT)klipper.elf
@echo " Creating bin file $@"
$(Q)$(OBJCOPY) -O binary $< $@
# Flash rules
flash: $(OUT)klipper.bin
@echo " Flashing $< to $(FLASH_DEVICE)"
$(Q)$(PYTHON) ./scripts/flash_usb.py -t lpc176x -d "$(FLASH_DEVICE)" $(if $(NOSUDO),--no-sudo) $(OUT)klipper.bin
|
