1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
|
// Linux i2c implementation
//
// Copyright (C) 2020 Eric Callahan <arksine.code@gmail.com>
//
// This file may be distributed under the terms of the GNU GPLv3 license.
#include <fcntl.h> // open
#include <linux/i2c-dev.h> // I2C_SLAVE
#include <stdio.h> // snprintf
#include <sys/ioctl.h> // ioctl
#include <unistd.h> // write
#include "gpio.h" // i2c_setup
#include "command.h" // shutdown
#include "internal.h" // report_errno
#include "sched.h" // sched_shutdown
DECL_ENUMERATION_RANGE("i2c_bus", "i2c.0", 0, 2);
struct i2c_s {
uint32_t bus;
uint8_t addr;
int fd;
};
static struct i2c_s devices[16];
static int devices_count;
static int
i2c_open(uint32_t bus, uint8_t addr)
{
// Find existing device (if already opened)
int i;
for (i=0; i<devices_count; i++) {
if (devices[i].bus == bus && devices[i].addr == addr) {
return devices[i].fd;
}
}
char fname[256];
snprintf(fname, sizeof(fname), "/dev/i2c-%d", bus);
int fd = open(fname, O_RDWR|O_CLOEXEC);
if (fd < 0) {
report_errno("open i2c", fd);
goto fail;
}
int ret = ioctl(fd, I2C_SLAVE, addr);
if (ret < 0) {
report_errno("ioctl i2c", fd);
goto fail;
}
ret = set_non_blocking(fd);
if (ret < 0)
goto fail;
devices[devices_count].bus = bus;
devices[devices_count].addr = addr;
devices[devices_count].fd = fd;
devices_count++;
return fd;
fail:
if (fd >= 0)
close(fd);
shutdown("Unable to open i2c device");
}
struct i2c_config
i2c_setup(uint32_t bus, uint32_t rate, uint8_t addr)
{
// Note: The rate is set by the kernel driver, for a Raspberry Pi this
// is done with the following setting in /boot/config.txt:
//
// dtparam=i2c_baudrate=<rate>
int fd = i2c_open(bus, addr);
return (struct i2c_config){.fd=fd};
}
void
i2c_write(struct i2c_config config, uint8_t write_len, uint8_t *data)
{
int ret = write(config.fd, data, write_len);
if (ret != write_len) {
if (ret < 0)
report_errno("write value i2c", ret);
try_shutdown("Unable write i2c device");
}
}
void
i2c_read(struct i2c_config config, uint8_t reg_len, uint8_t *reg
, uint8_t read_len, uint8_t *data)
{
i2c_write(config, reg_len, reg);
int ret = read(config.fd, data, read_len);
if (ret != read_len) {
if (ret < 0)
report_errno("read value i2c", ret);
try_shutdown("Unable to read i2c device");
}
}
|
