blob: ef0cd9bc8cff6b8fa5a912ebafa9c13b16819391 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
|
// Code to setup peripheral clocks on the SAMD21
//
// Copyright (C) 2018 Kevin O'Connor <kevin@koconnor.net>
//
// This file may be distributed under the terms of the GNU GPLv3 license.
#include "autoconf.h" // CONFIG_CLOCK_FREQ
#include "compiler.h" // DIV_ROUND_CLOSEST
#include "internal.h" // enable_pclock
#include "samd21.h" // GCLK
// The "generic clock generators" that are configured
#define CLKGEN_MAIN 0
#define CLKGEN_32K 1
#define CLKGEN_ULP32K 2
// Enable a peripheral clock and power to that peripheral
void
enable_pclock(uint32_t clock_id, uint32_t pmask)
{
GCLK->CLKCTRL.reg = (GCLK_CLKCTRL_ID(clock_id)
| GCLK_CLKCTRL_GEN(CLKGEN_MAIN) | GCLK_CLKCTRL_CLKEN);
while (GCLK->STATUS.reg & GCLK_STATUS_SYNCBUSY)
;
PM->APBCMASK.reg |= pmask;
}
#define FREQ_XOSC32K 32768
void
SystemInit(void)
{
// Setup flash to work with 48Mhz clock
NVMCTRL->CTRLB.reg = NVMCTRL_CTRLB_RWS_HALF;
// Enable external 32Khz crystal
uint32_t val = (SYSCTRL_XOSC32K_STARTUP(6)
| SYSCTRL_XOSC32K_XTALEN | SYSCTRL_XOSC32K_EN32K);
SYSCTRL->XOSC32K.reg = val;
SYSCTRL->XOSC32K.reg = val | SYSCTRL_XOSC32K_ENABLE;
while (!(SYSCTRL->PCLKSR.reg & SYSCTRL_PCLKSR_XOSC32KRDY))
;
// Reset GCLK
GCLK->CTRL.reg = GCLK_CTRL_SWRST;
while (GCLK->CTRL.reg & GCLK_CTRL_SWRST)
;
// Route external 32Khz clock to DFLL48M (via CLKGEN_32K)
GCLK->GENDIV.reg = GCLK_GENDIV_ID(CLKGEN_32K);
GCLK->GENCTRL.reg = (GCLK_GENCTRL_ID(CLKGEN_32K)
| GCLK_GENCTRL_SRC_XOSC32K | GCLK_GENCTRL_GENEN);
GCLK->CLKCTRL.reg = (GCLK_CLKCTRL_ID(SYSCTRL_GCLK_ID_DFLL48)
| GCLK_CLKCTRL_GEN(CLKGEN_32K) | GCLK_CLKCTRL_CLKEN);
while (GCLK->STATUS.reg & GCLK_STATUS_SYNCBUSY)
;
// Configure DFLL48M clock
SYSCTRL->DFLLCTRL.reg = 0;
uint32_t mul = DIV_ROUND_CLOSEST(CONFIG_CLOCK_FREQ, FREQ_XOSC32K);
SYSCTRL->DFLLMUL.reg = (SYSCTRL_DFLLMUL_CSTEP(31)
| SYSCTRL_DFLLMUL_FSTEP(511)
| SYSCTRL_DFLLMUL_MUL(mul));
SYSCTRL->DFLLCTRL.reg = (SYSCTRL_DFLLCTRL_MODE | SYSCTRL_DFLLCTRL_WAITLOCK
| SYSCTRL_DFLLCTRL_QLDIS
| SYSCTRL_DFLLCTRL_ENABLE);
uint32_t ready = (SYSCTRL_PCLKSR_DFLLRDY | SYSCTRL_PCLKSR_DFLLLCKC
| SYSCTRL_PCLKSR_DFLLLCKF);
while ((SYSCTRL->PCLKSR.reg & ready) != ready)
;
// Switch main clock to DFLL48M clock
GCLK->GENDIV.reg = GCLK_GENDIV_ID(CLKGEN_MAIN);
GCLK->GENCTRL.reg = (GCLK_GENCTRL_ID(CLKGEN_MAIN)
| GCLK_GENCTRL_SRC_DFLL48M
| GCLK_GENCTRL_IDC | GCLK_GENCTRL_GENEN);
}
|
