1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
|
/**
* Copyright (c) 2021 Raspberry Pi (Trading) Ltd.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
// =============================================================================
// Register block : SYSCFG
// Version : 1
// Bus type : apb
// Description : Register block for various chip control signals
// =============================================================================
#ifndef HARDWARE_REGS_SYSCFG_DEFINED
#define HARDWARE_REGS_SYSCFG_DEFINED
// =============================================================================
// Register : SYSCFG_PROC0_NMI_MASK
// Description : Processor core 0 NMI source mask
// Set a bit high to enable NMI from that IRQ
#define SYSCFG_PROC0_NMI_MASK_OFFSET _u(0x00000000)
#define SYSCFG_PROC0_NMI_MASK_BITS _u(0xffffffff)
#define SYSCFG_PROC0_NMI_MASK_RESET _u(0x00000000)
#define SYSCFG_PROC0_NMI_MASK_MSB _u(31)
#define SYSCFG_PROC0_NMI_MASK_LSB _u(0)
#define SYSCFG_PROC0_NMI_MASK_ACCESS "RW"
// =============================================================================
// Register : SYSCFG_PROC1_NMI_MASK
// Description : Processor core 1 NMI source mask
// Set a bit high to enable NMI from that IRQ
#define SYSCFG_PROC1_NMI_MASK_OFFSET _u(0x00000004)
#define SYSCFG_PROC1_NMI_MASK_BITS _u(0xffffffff)
#define SYSCFG_PROC1_NMI_MASK_RESET _u(0x00000000)
#define SYSCFG_PROC1_NMI_MASK_MSB _u(31)
#define SYSCFG_PROC1_NMI_MASK_LSB _u(0)
#define SYSCFG_PROC1_NMI_MASK_ACCESS "RW"
// =============================================================================
// Register : SYSCFG_PROC_CONFIG
// Description : Configuration for processors
#define SYSCFG_PROC_CONFIG_OFFSET _u(0x00000008)
#define SYSCFG_PROC_CONFIG_BITS _u(0xff000003)
#define SYSCFG_PROC_CONFIG_RESET _u(0x10000000)
// -----------------------------------------------------------------------------
// Field : SYSCFG_PROC_CONFIG_PROC1_DAP_INSTID
// Description : Configure proc1 DAP instance ID.
// Recommend that this is NOT changed until you require debug
// access in multi-chip environment
// WARNING: do not set to 15 as this is reserved for RescueDP
#define SYSCFG_PROC_CONFIG_PROC1_DAP_INSTID_RESET _u(0x1)
#define SYSCFG_PROC_CONFIG_PROC1_DAP_INSTID_BITS _u(0xf0000000)
#define SYSCFG_PROC_CONFIG_PROC1_DAP_INSTID_MSB _u(31)
#define SYSCFG_PROC_CONFIG_PROC1_DAP_INSTID_LSB _u(28)
#define SYSCFG_PROC_CONFIG_PROC1_DAP_INSTID_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SYSCFG_PROC_CONFIG_PROC0_DAP_INSTID
// Description : Configure proc0 DAP instance ID.
// Recommend that this is NOT changed until you require debug
// access in multi-chip environment
// WARNING: do not set to 15 as this is reserved for RescueDP
#define SYSCFG_PROC_CONFIG_PROC0_DAP_INSTID_RESET _u(0x0)
#define SYSCFG_PROC_CONFIG_PROC0_DAP_INSTID_BITS _u(0x0f000000)
#define SYSCFG_PROC_CONFIG_PROC0_DAP_INSTID_MSB _u(27)
#define SYSCFG_PROC_CONFIG_PROC0_DAP_INSTID_LSB _u(24)
#define SYSCFG_PROC_CONFIG_PROC0_DAP_INSTID_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SYSCFG_PROC_CONFIG_PROC1_HALTED
// Description : Indication that proc1 has halted
#define SYSCFG_PROC_CONFIG_PROC1_HALTED_RESET _u(0x0)
#define SYSCFG_PROC_CONFIG_PROC1_HALTED_BITS _u(0x00000002)
#define SYSCFG_PROC_CONFIG_PROC1_HALTED_MSB _u(1)
#define SYSCFG_PROC_CONFIG_PROC1_HALTED_LSB _u(1)
#define SYSCFG_PROC_CONFIG_PROC1_HALTED_ACCESS "RO"
// -----------------------------------------------------------------------------
// Field : SYSCFG_PROC_CONFIG_PROC0_HALTED
// Description : Indication that proc0 has halted
#define SYSCFG_PROC_CONFIG_PROC0_HALTED_RESET _u(0x0)
#define SYSCFG_PROC_CONFIG_PROC0_HALTED_BITS _u(0x00000001)
#define SYSCFG_PROC_CONFIG_PROC0_HALTED_MSB _u(0)
#define SYSCFG_PROC_CONFIG_PROC0_HALTED_LSB _u(0)
#define SYSCFG_PROC_CONFIG_PROC0_HALTED_ACCESS "RO"
// =============================================================================
// Register : SYSCFG_PROC_IN_SYNC_BYPASS
// Description : For each bit, if 1, bypass the input synchronizer between that
// GPIO
// and the GPIO input register in the SIO. The input synchronizers
// should
// generally be unbypassed, to avoid injecting metastabilities
// into processors.
// If you're feeling brave, you can bypass to save two cycles of
// input
// latency. This register applies to GPIO 0...29.
#define SYSCFG_PROC_IN_SYNC_BYPASS_OFFSET _u(0x0000000c)
#define SYSCFG_PROC_IN_SYNC_BYPASS_BITS _u(0x3fffffff)
#define SYSCFG_PROC_IN_SYNC_BYPASS_RESET _u(0x00000000)
#define SYSCFG_PROC_IN_SYNC_BYPASS_MSB _u(29)
#define SYSCFG_PROC_IN_SYNC_BYPASS_LSB _u(0)
#define SYSCFG_PROC_IN_SYNC_BYPASS_ACCESS "RW"
// =============================================================================
// Register : SYSCFG_PROC_IN_SYNC_BYPASS_HI
// Description : For each bit, if 1, bypass the input synchronizer between that
// GPIO
// and the GPIO input register in the SIO. The input synchronizers
// should
// generally be unbypassed, to avoid injecting metastabilities
// into processors.
// If you're feeling brave, you can bypass to save two cycles of
// input
// latency. This register applies to GPIO 30...35 (the QSPI IOs).
#define SYSCFG_PROC_IN_SYNC_BYPASS_HI_OFFSET _u(0x00000010)
#define SYSCFG_PROC_IN_SYNC_BYPASS_HI_BITS _u(0x0000003f)
#define SYSCFG_PROC_IN_SYNC_BYPASS_HI_RESET _u(0x00000000)
#define SYSCFG_PROC_IN_SYNC_BYPASS_HI_MSB _u(5)
#define SYSCFG_PROC_IN_SYNC_BYPASS_HI_LSB _u(0)
#define SYSCFG_PROC_IN_SYNC_BYPASS_HI_ACCESS "RW"
// =============================================================================
// Register : SYSCFG_DBGFORCE
// Description : Directly control the SWD debug port of either processor
#define SYSCFG_DBGFORCE_OFFSET _u(0x00000014)
#define SYSCFG_DBGFORCE_BITS _u(0x000000ff)
#define SYSCFG_DBGFORCE_RESET _u(0x00000066)
// -----------------------------------------------------------------------------
// Field : SYSCFG_DBGFORCE_PROC1_ATTACH
// Description : Attach processor 1 debug port to syscfg controls, and
// disconnect it from external SWD pads.
#define SYSCFG_DBGFORCE_PROC1_ATTACH_RESET _u(0x0)
#define SYSCFG_DBGFORCE_PROC1_ATTACH_BITS _u(0x00000080)
#define SYSCFG_DBGFORCE_PROC1_ATTACH_MSB _u(7)
#define SYSCFG_DBGFORCE_PROC1_ATTACH_LSB _u(7)
#define SYSCFG_DBGFORCE_PROC1_ATTACH_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SYSCFG_DBGFORCE_PROC1_SWCLK
// Description : Directly drive processor 1 SWCLK, if PROC1_ATTACH is set
#define SYSCFG_DBGFORCE_PROC1_SWCLK_RESET _u(0x1)
#define SYSCFG_DBGFORCE_PROC1_SWCLK_BITS _u(0x00000040)
#define SYSCFG_DBGFORCE_PROC1_SWCLK_MSB _u(6)
#define SYSCFG_DBGFORCE_PROC1_SWCLK_LSB _u(6)
#define SYSCFG_DBGFORCE_PROC1_SWCLK_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SYSCFG_DBGFORCE_PROC1_SWDI
// Description : Directly drive processor 1 SWDIO input, if PROC1_ATTACH is set
#define SYSCFG_DBGFORCE_PROC1_SWDI_RESET _u(0x1)
#define SYSCFG_DBGFORCE_PROC1_SWDI_BITS _u(0x00000020)
#define SYSCFG_DBGFORCE_PROC1_SWDI_MSB _u(5)
#define SYSCFG_DBGFORCE_PROC1_SWDI_LSB _u(5)
#define SYSCFG_DBGFORCE_PROC1_SWDI_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SYSCFG_DBGFORCE_PROC1_SWDO
// Description : Observe the value of processor 1 SWDIO output.
#define SYSCFG_DBGFORCE_PROC1_SWDO_RESET "-"
#define SYSCFG_DBGFORCE_PROC1_SWDO_BITS _u(0x00000010)
#define SYSCFG_DBGFORCE_PROC1_SWDO_MSB _u(4)
#define SYSCFG_DBGFORCE_PROC1_SWDO_LSB _u(4)
#define SYSCFG_DBGFORCE_PROC1_SWDO_ACCESS "RO"
// -----------------------------------------------------------------------------
// Field : SYSCFG_DBGFORCE_PROC0_ATTACH
// Description : Attach processor 0 debug port to syscfg controls, and
// disconnect it from external SWD pads.
#define SYSCFG_DBGFORCE_PROC0_ATTACH_RESET _u(0x0)
#define SYSCFG_DBGFORCE_PROC0_ATTACH_BITS _u(0x00000008)
#define SYSCFG_DBGFORCE_PROC0_ATTACH_MSB _u(3)
#define SYSCFG_DBGFORCE_PROC0_ATTACH_LSB _u(3)
#define SYSCFG_DBGFORCE_PROC0_ATTACH_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SYSCFG_DBGFORCE_PROC0_SWCLK
// Description : Directly drive processor 0 SWCLK, if PROC0_ATTACH is set
#define SYSCFG_DBGFORCE_PROC0_SWCLK_RESET _u(0x1)
#define SYSCFG_DBGFORCE_PROC0_SWCLK_BITS _u(0x00000004)
#define SYSCFG_DBGFORCE_PROC0_SWCLK_MSB _u(2)
#define SYSCFG_DBGFORCE_PROC0_SWCLK_LSB _u(2)
#define SYSCFG_DBGFORCE_PROC0_SWCLK_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SYSCFG_DBGFORCE_PROC0_SWDI
// Description : Directly drive processor 0 SWDIO input, if PROC0_ATTACH is set
#define SYSCFG_DBGFORCE_PROC0_SWDI_RESET _u(0x1)
#define SYSCFG_DBGFORCE_PROC0_SWDI_BITS _u(0x00000002)
#define SYSCFG_DBGFORCE_PROC0_SWDI_MSB _u(1)
#define SYSCFG_DBGFORCE_PROC0_SWDI_LSB _u(1)
#define SYSCFG_DBGFORCE_PROC0_SWDI_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SYSCFG_DBGFORCE_PROC0_SWDO
// Description : Observe the value of processor 0 SWDIO output.
#define SYSCFG_DBGFORCE_PROC0_SWDO_RESET "-"
#define SYSCFG_DBGFORCE_PROC0_SWDO_BITS _u(0x00000001)
#define SYSCFG_DBGFORCE_PROC0_SWDO_MSB _u(0)
#define SYSCFG_DBGFORCE_PROC0_SWDO_LSB _u(0)
#define SYSCFG_DBGFORCE_PROC0_SWDO_ACCESS "RO"
// =============================================================================
// Register : SYSCFG_MEMPOWERDOWN
// Description : Control power downs to memories. Set high to power down
// memories.
// Use with extreme caution
#define SYSCFG_MEMPOWERDOWN_OFFSET _u(0x00000018)
#define SYSCFG_MEMPOWERDOWN_BITS _u(0x000000ff)
#define SYSCFG_MEMPOWERDOWN_RESET _u(0x00000000)
// -----------------------------------------------------------------------------
// Field : SYSCFG_MEMPOWERDOWN_ROM
// Description : None
#define SYSCFG_MEMPOWERDOWN_ROM_RESET _u(0x0)
#define SYSCFG_MEMPOWERDOWN_ROM_BITS _u(0x00000080)
#define SYSCFG_MEMPOWERDOWN_ROM_MSB _u(7)
#define SYSCFG_MEMPOWERDOWN_ROM_LSB _u(7)
#define SYSCFG_MEMPOWERDOWN_ROM_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SYSCFG_MEMPOWERDOWN_USB
// Description : None
#define SYSCFG_MEMPOWERDOWN_USB_RESET _u(0x0)
#define SYSCFG_MEMPOWERDOWN_USB_BITS _u(0x00000040)
#define SYSCFG_MEMPOWERDOWN_USB_MSB _u(6)
#define SYSCFG_MEMPOWERDOWN_USB_LSB _u(6)
#define SYSCFG_MEMPOWERDOWN_USB_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SYSCFG_MEMPOWERDOWN_SRAM5
// Description : None
#define SYSCFG_MEMPOWERDOWN_SRAM5_RESET _u(0x0)
#define SYSCFG_MEMPOWERDOWN_SRAM5_BITS _u(0x00000020)
#define SYSCFG_MEMPOWERDOWN_SRAM5_MSB _u(5)
#define SYSCFG_MEMPOWERDOWN_SRAM5_LSB _u(5)
#define SYSCFG_MEMPOWERDOWN_SRAM5_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SYSCFG_MEMPOWERDOWN_SRAM4
// Description : None
#define SYSCFG_MEMPOWERDOWN_SRAM4_RESET _u(0x0)
#define SYSCFG_MEMPOWERDOWN_SRAM4_BITS _u(0x00000010)
#define SYSCFG_MEMPOWERDOWN_SRAM4_MSB _u(4)
#define SYSCFG_MEMPOWERDOWN_SRAM4_LSB _u(4)
#define SYSCFG_MEMPOWERDOWN_SRAM4_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SYSCFG_MEMPOWERDOWN_SRAM3
// Description : None
#define SYSCFG_MEMPOWERDOWN_SRAM3_RESET _u(0x0)
#define SYSCFG_MEMPOWERDOWN_SRAM3_BITS _u(0x00000008)
#define SYSCFG_MEMPOWERDOWN_SRAM3_MSB _u(3)
#define SYSCFG_MEMPOWERDOWN_SRAM3_LSB _u(3)
#define SYSCFG_MEMPOWERDOWN_SRAM3_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SYSCFG_MEMPOWERDOWN_SRAM2
// Description : None
#define SYSCFG_MEMPOWERDOWN_SRAM2_RESET _u(0x0)
#define SYSCFG_MEMPOWERDOWN_SRAM2_BITS _u(0x00000004)
#define SYSCFG_MEMPOWERDOWN_SRAM2_MSB _u(2)
#define SYSCFG_MEMPOWERDOWN_SRAM2_LSB _u(2)
#define SYSCFG_MEMPOWERDOWN_SRAM2_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SYSCFG_MEMPOWERDOWN_SRAM1
// Description : None
#define SYSCFG_MEMPOWERDOWN_SRAM1_RESET _u(0x0)
#define SYSCFG_MEMPOWERDOWN_SRAM1_BITS _u(0x00000002)
#define SYSCFG_MEMPOWERDOWN_SRAM1_MSB _u(1)
#define SYSCFG_MEMPOWERDOWN_SRAM1_LSB _u(1)
#define SYSCFG_MEMPOWERDOWN_SRAM1_ACCESS "RW"
// -----------------------------------------------------------------------------
// Field : SYSCFG_MEMPOWERDOWN_SRAM0
// Description : None
#define SYSCFG_MEMPOWERDOWN_SRAM0_RESET _u(0x0)
#define SYSCFG_MEMPOWERDOWN_SRAM0_BITS _u(0x00000001)
#define SYSCFG_MEMPOWERDOWN_SRAM0_MSB _u(0)
#define SYSCFG_MEMPOWERDOWN_SRAM0_LSB _u(0)
#define SYSCFG_MEMPOWERDOWN_SRAM0_ACCESS "RW"
// =============================================================================
#endif // HARDWARE_REGS_SYSCFG_DEFINED
|
