blob: e6b0f68100e849fbbea37d139bd0b684b437737c (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
|
// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT
/**
* Copyright (c) 2024 Raspberry Pi Ltd.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _HARDWARE_STRUCTS_PADS_QSPI_H
#define _HARDWARE_STRUCTS_PADS_QSPI_H
/**
* \file rp2350/pads_qspi.h
*/
#include "hardware/address_mapped.h"
#include "hardware/regs/pads_qspi.h"
// Reference to datasheet: https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf#tab-registerlist_pads_qspi
//
// The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature)
// _REG_(x) will link to the corresponding register in hardware/regs/pads_qspi.h.
//
// Bit-field descriptions are of the form:
// BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION
typedef struct {
_REG_(PADS_QSPI_VOLTAGE_SELECT_OFFSET) // PADS_QSPI_VOLTAGE_SELECT
// Voltage select
// 0x00000001 [0] VOLTAGE_SELECT (0)
io_rw_32 voltage_select;
// (Description copied from array index 0 register PADS_QSPI_GPIO_QSPI_SCLK applies similarly to other array indexes)
_REG_(PADS_QSPI_GPIO_QSPI_SCLK_OFFSET) // PADS_QSPI_GPIO_QSPI_SCLK
// 0x00000100 [8] ISO (1) Pad isolation control
// 0x00000080 [7] OD (0) Output disable
// 0x00000040 [6] IE (1) Input enable
// 0x00000030 [5:4] DRIVE (0x1) Drive strength
// 0x00000008 [3] PUE (0) Pull up enable
// 0x00000004 [2] PDE (1) Pull down enable
// 0x00000002 [1] SCHMITT (1) Enable schmitt trigger
// 0x00000001 [0] SLEWFAST (0) Slew rate control
io_rw_32 io[6];
} pads_qspi_hw_t;
#define pads_qspi_hw ((pads_qspi_hw_t *)PADS_QSPI_BASE)
static_assert(sizeof (pads_qspi_hw_t) == 0x001c, "");
#endif // _HARDWARE_STRUCTS_PADS_QSPI_H
|
