1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
|
# TMC2660 configuration
#
# Copyright (C) 2018-2019 Florian Heilmann <Florian.Heilmann@gmx.net>
# Copyright (C) 2019-2021 Kevin O'Connor <kevin@koconnor.net>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
import math, logging
from . import bus, tmc, tmc2130
Registers = {
"DRVCONF": 0xE,
"SGCSCONF": 0xC,
"SMARTEN": 0xA,
"CHOPCONF": 0x8,
"DRVCTRL": 0x0,
}
ReadRegisters = ["READRSP@RDSEL0", "READRSP@RDSEL1", "READRSP@RDSEL2"]
Fields = {}
Fields["DRVCTRL"] = {
"mres": 0x0F,
"dedge": 0x01 << 8,
"intpol": 0x01 << 9,
}
Fields["CHOPCONF"] = {
"toff": 0x0F,
"hstrt": 0x7 << 4,
"hend": 0x0F << 7,
"hdec": 0x03 << 11,
"rndtf": 0x01 << 13,
"chm": 0x01 << 14,
"tbl": 0x03 << 15,
}
Fields["SMARTEN"] = {
"semin": 0x0F,
"seup": 0x03 << 5,
"semax": 0x0F << 8,
"sedn": 0x03 << 13,
"seimin": 0x01 << 15,
}
Fields["SGCSCONF"] = {"cs": 0x1F, "sgt": 0x7F << 8, "sfilt": 0x01 << 16}
Fields["DRVCONF"] = {
"rdsel": 0x03 << 4,
"vsense": 0x01 << 6,
"sdoff": 0x01 << 7,
"ts2g": 0x03 << 8,
"diss2g": 0x01 << 10,
"slpl": 0x03 << 12,
"slph": 0x03 << 14,
"tst": 0x01 << 16,
}
Fields["READRSP@RDSEL0"] = {
"stallguard": 0x01 << 4,
"ot": 0x01 << 5,
"otpw": 0x01 << 6,
"s2ga": 0x01 << 7,
"s2gb": 0x01 << 8,
"ola": 0x01 << 9,
"olb": 0x01 << 10,
"stst": 0x01 << 11,
"mstep": 0x3FF << 14,
}
Fields["READRSP@RDSEL1"] = {
"stallguard": 0x01 << 4,
"ot": 0x01 << 5,
"otpw": 0x01 << 6,
"s2ga": 0x01 << 7,
"s2gb": 0x01 << 8,
"ola": 0x01 << 9,
"olb": 0x01 << 10,
"stst": 0x01 << 11,
"sg_result": 0x3FF << 14,
}
Fields["READRSP@RDSEL2"] = {
"stallguard": 0x01 << 4,
"ot": 0x01 << 5,
"otpw": 0x01 << 6,
"s2ga": 0x01 << 7,
"s2gb": 0x01 << 8,
"ola": 0x01 << 9,
"olb": 0x01 << 10,
"stst": 0x01 << 11,
"se": 0x1F << 14,
"sg_result@rdsel2": 0x1F << 19,
}
SignedFields = ["sgt"]
FieldFormatters = dict(tmc2130.FieldFormatters)
FieldFormatters.update(
{
"chm": (lambda v: "1(constant toff)" if v else "0(spreadCycle)"),
"vsense": (lambda v: "1(165mV)" if v else "0(305mV)"),
"sdoff": (lambda v: "1(Step/Dir disabled!)" if v else ""),
"diss2g": (lambda v: "1(Short to GND disabled!)" if v else ""),
"se": (lambda v: ("%d" % v) if v else "0(Reset?)"),
}
)
######################################################################
# TMC stepper current config helper
######################################################################
MAX_CURRENT = 2.400
class TMC2660CurrentHelper:
def __init__(self, config, mcu_tmc):
self.printer = config.get_printer()
self.name = config.get_name().split()[-1]
self.mcu_tmc = mcu_tmc
self.fields = mcu_tmc.get_fields()
self.current = config.getfloat("run_current", minval=0.1, maxval=MAX_CURRENT)
self.sense_resistor = config.getfloat("sense_resistor")
vsense, cs = self._calc_current(self.current)
self.fields.set_field("cs", cs)
self.fields.set_field("vsense", vsense)
# Register ready/printing handlers
self.idle_current_percentage = config.getint(
"idle_current_percent", default=100, minval=0, maxval=100
)
if self.idle_current_percentage < 100:
self.printer.register_event_handler(
"idle_timeout:printing", self._handle_printing
)
self.printer.register_event_handler(
"idle_timeout:ready", self._handle_ready
)
def _calc_current_bits(self, current, vsense):
vref = 0.165 if vsense else 0.310
sr = self.sense_resistor
cs = int(32.0 * sr * current * math.sqrt(2.0) / vref + 0.5) - 1
return max(0, min(31, cs))
def _calc_current_from_bits(self, cs, vsense):
vref = 0.165 if vsense else 0.310
return (cs + 1) * vref / (32.0 * self.sense_resistor * math.sqrt(2.0))
def _calc_current(self, run_current):
vsense = True
irun = self._calc_current_bits(run_current, True)
if irun == 31:
cur = self._calc_current_from_bits(irun, True)
if cur < run_current:
irun2 = self._calc_current_bits(run_current, False)
cur2 = self._calc_current_from_bits(irun2, False)
if abs(run_current - cur2) < abs(run_current - cur):
vsense = False
irun = irun2
return vsense, irun
def _handle_printing(self, print_time):
print_time -= 0.100 # Schedule slightly before deadline
self.printer.get_reactor().register_callback(
(lambda ev: self._update_current(self.current, print_time))
)
def _handle_ready(self, print_time):
current = self.current * float(self.idle_current_percentage) / 100.0
self.printer.get_reactor().register_callback(
(lambda ev: self._update_current(current, print_time))
)
def _update_current(self, current, print_time):
vsense, cs = self._calc_current(current)
val = self.fields.set_field("cs", cs)
self.mcu_tmc.set_register("SGCSCONF", val, print_time)
# Only update VSENSE if we need to
if vsense != self.fields.get_field("vsense"):
val = self.fields.set_field("vsense", vsense)
self.mcu_tmc.set_register("DRVCONF", val, print_time)
def get_current(self):
return self.current, None, None, MAX_CURRENT
def set_current(self, run_current, hold_current, print_time):
self.current = run_current
self._update_current(run_current, print_time)
######################################################################
# TMC2660 SPI
######################################################################
# Helper code for working with TMC2660 devices via SPI
class MCU_TMC2660_SPI:
def __init__(self, config, name_to_reg, fields):
self.printer = config.get_printer()
self.mutex = self.printer.get_reactor().mutex()
self.spi = bus.MCU_SPI_from_config(config, 0, default_speed=4000000)
self.name_to_reg = name_to_reg
self.fields = fields
def get_fields(self):
return self.fields
def get_register_raw(self, reg_name):
new_rdsel = ReadRegisters.index(reg_name)
reg = self.name_to_reg["DRVCONF"]
if self.printer.get_start_args().get("debugoutput") is not None:
return {
"data": 0,
"#receive_time": 0.0,
}
with self.mutex:
old_rdsel = self.fields.get_field("rdsel")
val = self.fields.set_field("rdsel", new_rdsel)
msg = [((val >> 16) | reg) & 0xFF, (val >> 8) & 0xFF, val & 0xFF]
if new_rdsel != old_rdsel:
# Must set RDSEL value first
self.spi.spi_send(msg)
params = self.spi.spi_transfer(msg)
pr = bytearray(params["response"])
return {
"data": (pr[0] << 16) | (pr[1] << 8) | pr[2],
"#receive_time": params["#receive_time"],
}
def get_register(self, reg_name):
return self.get_register_raw(reg_name)["data"]
def set_register(self, reg_name, val, print_time=None):
minclock = 0
if print_time is not None:
minclock = self.spi.get_mcu().print_time_to_clock(print_time)
reg = self.name_to_reg[reg_name]
msg = [((val >> 16) | reg) & 0xFF, (val >> 8) & 0xFF, val & 0xFF]
with self.mutex:
self.spi.spi_send(msg, minclock)
def get_tmc_frequency(self):
return None
def get_mcu(self):
return self.spi.get_mcu()
######################################################################
# TMC2660 printer object
######################################################################
class TMC2660:
def __init__(self, config):
# Setup mcu communication
self.fields = tmc.FieldHelper(Fields, SignedFields, FieldFormatters)
self.fields.set_field("sdoff", 0) # Access DRVCTRL in step/dir mode
self.mcu_tmc = MCU_TMC2660_SPI(config, Registers, self.fields)
# Register commands
current_helper = TMC2660CurrentHelper(config, self.mcu_tmc)
cmdhelper = tmc.TMCCommandHelper(config, self.mcu_tmc, current_helper)
cmdhelper.setup_register_dump(ReadRegisters)
self.get_phase_offset = cmdhelper.get_phase_offset
self.get_status = cmdhelper.get_status
# CHOPCONF
set_config_field = self.fields.set_config_field
set_config_field(config, "tbl", 2)
set_config_field(config, "rndtf", 0)
set_config_field(config, "hdec", 0)
set_config_field(config, "chm", 0)
set_config_field(config, "hend", 3)
set_config_field(config, "hstrt", 3)
set_config_field(config, "toff", 4)
if not self.fields.get_field("chm"):
if (self.fields.get_field("hstrt") + self.fields.get_field("hend")) > 15:
raise config.error("driver_HEND + driver_HSTRT must be <= 15")
# SMARTEN
set_config_field(config, "seimin", 0)
set_config_field(config, "sedn", 0)
set_config_field(config, "semax", 0)
set_config_field(config, "seup", 0)
set_config_field(config, "semin", 0)
# SGSCONF
set_config_field(config, "sfilt", 0)
set_config_field(config, "sgt", 0)
# DRVCONF
set_config_field(config, "slph", 0)
set_config_field(config, "slpl", 0)
set_config_field(config, "diss2g", 0)
set_config_field(config, "ts2g", 3)
def load_config_prefix(config):
return TMC2660(config)
|
