1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
|
# TMC2130 configuration
#
# Copyright (C) 2018-2019 Kevin O'Connor <kevin@koconnor.net>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
import math, logging
import bus, tmc
TMC_FREQUENCY=13200000.
Registers = {
"GCONF": 0x00, "GSTAT": 0x01, "IOIN": 0x04, "IHOLD_IRUN": 0x10,
"TPOWERDOWN": 0x11, "TSTEP": 0x12, "TPWMTHRS": 0x13, "TCOOLTHRS": 0x14,
"THIGH": 0x15, "XDIRECT": 0x2d, "MSLUT0": 0x60, "MSLUTSEL": 0x68,
"MSLUTSTART": 0x69, "MSCNT": 0x6a, "MSCURACT": 0x6b, "CHOPCONF": 0x6c,
"COOLCONF": 0x6d, "DCCTRL": 0x6e, "DRV_STATUS": 0x6f, "PWMCONF": 0x70,
"PWM_SCALE": 0x71, "ENCM_CTRL": 0x72, "LOST_STEPS": 0x73,
}
ReadRegisters = [
"GCONF", "GSTAT", "IOIN", "TSTEP", "XDIRECT", "MSCNT", "MSCURACT",
"CHOPCONF", "DRV_STATUS", "PWM_SCALE", "LOST_STEPS",
]
Fields = {}
Fields["GCONF"] = {
"I_scale_analog": 1<<0, "internal_Rsense": 1<<1, "en_pwm_mode": 1<<2,
"enc_commutation": 1<<3, "shaft": 1<<4, "diag0_error": 1<<5,
"diag0_otpw": 1<<6, "diag0_stall": 1<<7, "diag1_stall": 1<<8,
"diag1_index": 1<<9, "diag1_onstate": 1<<10, "diag1_steps_skipped": 1<<11,
"diag0_int_pushpull": 1<<12, "diag1_pushpull": 1<<13,
"small_hysteresis": 1<<14, "stop_enable": 1<<15, "direct_mode": 1<<16,
"test_mode": 1<<17
}
Fields["GSTAT"] = { "reset": 1<<0, "drv_err": 1<<1, "uv_cp": 1<<2 }
Fields["IOIN"] = {
"STEP": 1<<0, "DIR": 1<<1, "DCEN_CFG4": 1<<2, "DCIN_CFG5": 1<<3,
"DRV_ENN_CFG6": 1<<4, "DCO": 1<<5, "VERSION": 0xff << 24
}
Fields["IHOLD_IRUN"] = {
"IHOLD": 0x1f << 0, "IRUN": 0x1f << 8, "IHOLDDELAY": 0x0f << 16
}
Fields["TPOWERDOWN"] = { "TPOWERDOWN": 0xff }
Fields["TSTEP"] = { "TSTEP": 0xfffff }
Fields["TPWMTHRS"] = { "TPWMTHRS": 0xfffff }
Fields["TCOOLTHRS"] = { "TCOOLTHRS": 0xfffff }
Fields["THIGH"] = { "THIGH": 0xfffff }
Fields["MSCNT"] = { "MSCNT": 0x3ff }
Fields["MSCURACT"] = { "CUR_A": 0x1ff, "CUR_B": 0x1ff << 16 }
Fields["CHOPCONF"] = {
"toff": 0x0f, "hstrt": 0x07 << 4, "hend": 0x0f << 7, "fd3": 1<<11,
"disfdcc": 1<<12, "rndtf": 1<<13, "chm": 1<<14, "TBL": 0x03 << 15,
"vsense": 1<<17, "vhighfs": 1<<18, "vhighchm": 1<<19, "sync": 0x0f << 20,
"MRES": 0x0f << 24, "intpol": 1<<28, "dedge": 1<<29, "diss2g": 1<<30
}
Fields["COOLCONF"] = {
"semin": 0x0f, "seup": 0x03 << 5, "semax": 0x0f << 8, "sedn": 0x03 << 13,
"seimin": 1<<15, "sgt": 0x7f << 16, "sfilt": 1<<24
}
Fields["DRV_STATUS"] = {
"SG_RESULT": 0x3ff, "fsactive": 1<<15, "CS_ACTUAL": 0x1f << 16,
"stallGuard": 1<<24, "ot": 1<<25, "otpw": 1<<26, "s2ga": 1<<27,
"s2gb": 1<<28, "ola": 1<<29, "olb": 1<<30, "stst": 1<<31
}
Fields["PWMCONF"] = {
"PWM_AMPL": 0xff, "PWM_GRAD": 0xff << 8, "pwm_freq": 0x03 << 16,
"pwm_autoscale": 1<<18, "pwm_symmetric": 1<<19, "freewheel": 0x03 << 20
}
Fields["PWM_SCALE"] = { "PWM_SCALE": 0xff }
Fields["LOST_STEPS"] = { "LOST_STEPS": 0xfffff }
SignedFields = ["CUR_A", "CUR_B", "sgt"]
FieldFormatters = {
"I_scale_analog": (lambda v: "1(ExtVREF)" if v else ""),
"shaft": (lambda v: "1(Reverse)" if v else ""),
"drv_err": (lambda v: "1(ErrorShutdown!)" if v else ""),
"uv_cp": (lambda v: "1(Undervoltage!)" if v else ""),
"VERSION": (lambda v: "%#x" % v),
"MRES": (lambda v: "%d(%dusteps)" % (v, 0x100 >> v)),
"otpw": (lambda v: "1(OvertempWarning!)" if v else ""),
"ot": (lambda v: "1(OvertempError!)" if v else ""),
"s2ga": (lambda v: "1(ShortToGND_A!)" if v else ""),
"s2gb": (lambda v: "1(ShortToGND_B!)" if v else ""),
"ola": (lambda v: "1(OpenLoad_A!)" if v else ""),
"olb": (lambda v: "1(OpenLoad_B!)" if v else ""),
}
######################################################################
# TMC stepper current config helper
######################################################################
MAX_CURRENT = 2.000
class TMCCurrentHelper:
def __init__(self, config, mcu_tmc):
self.printer = config.get_printer()
self.name = config.get_name().split()[-1]
self.mcu_tmc = mcu_tmc
self.fields = mcu_tmc.get_fields()
run_current = config.getfloat('run_current',
above=0., maxval=MAX_CURRENT)
hold_current = config.getfloat('hold_current', run_current,
above=0., maxval=MAX_CURRENT)
self.sense_resistor = config.getfloat('sense_resistor', 0.110, above=0.)
vsense, irun, ihold = self._calc_current(run_current, hold_current)
self.fields.set_field("vsense", vsense)
self.fields.set_field("IHOLD", ihold)
self.fields.set_field("IRUN", irun)
gcode = self.printer.lookup_object("gcode")
gcode.register_mux_command(
"SET_TMC_CURRENT", "STEPPER", self.name,
self.cmd_SET_TMC_CURRENT, desc=self.cmd_SET_TMC_CURRENT_help)
def _calc_current_bits(self, current, vsense):
sense_resistor = self.sense_resistor + 0.020
vref = 0.32
if vsense:
vref = 0.18
cs = int(32. * current * sense_resistor * math.sqrt(2.) / vref
- 1. + .5)
return max(0, min(31, cs))
def _calc_current(self, run_current, hold_current):
vsense = False
irun = self._calc_current_bits(run_current, vsense)
ihold = self._calc_current_bits(min(hold_current, run_current),
vsense)
if irun < 16 and ihold < 16:
vsense = True
irun = self._calc_current_bits(run_current, vsense)
ihold = self._calc_current_bits(min(hold_current, run_current),
vsense)
return vsense, irun, ihold
def _calc_current_from_field(self, field_name):
bits = self.fields.get_field(field_name)
sense_resistor = self.sense_resistor + 0.020
vref = 0.32
if self.fields.get_field("vsense"):
vref = 0.18
current = (bits + 1) * vref / (32 * sense_resistor * math.sqrt(2.))
return round(current, 2)
cmd_SET_TMC_CURRENT_help = "Set the current of a TMC driver"
def cmd_SET_TMC_CURRENT(self, params):
gcode = self.printer.lookup_object('gcode')
if 'HOLDCURRENT' in params:
hold_current = gcode.get_float(
'HOLDCURRENT', params, above=0., maxval=MAX_CURRENT)
else:
hold_current = self._calc_current_from_field("IHOLD")
if 'CURRENT' in params:
run_current = gcode.get_float(
'CURRENT', params, minval=0., maxval=MAX_CURRENT)
else:
run_current = self._calc_current_from_field("IRUN")
if 'HOLDCURRENT' not in params and 'CURRENT' not in params:
# Query only
gcode.respond_info("Run Current: %0.2fA Hold Current: %0.2fA"
% (run_current, hold_current))
return
print_time = self.printer.lookup_object('toolhead').get_last_move_time()
vsense, irun, ihold = self._calc_current(run_current, hold_current)
if vsense != self.fields.get_field("vsense"):
val = self.fields.set_field("vsense", vsense)
self.mcu_tmc.set_register("CHOPCONF", val, print_time)
self.fields.set_field("IHOLD", ihold)
val = self.fields.set_field("IRUN", irun)
self.mcu_tmc.set_register("IHOLD_IRUN", val, print_time)
######################################################################
# TMC2130 SPI
######################################################################
# Helper code for working with TMC devices via SPI
class MCU_TMC_SPI:
def __init__(self, config, name_to_reg, fields):
self.printer = config.get_printer()
self.mutex = self.printer.get_reactor().mutex()
self.spi = bus.MCU_SPI_from_config(config, 3, default_speed=4000000)
self.name_to_reg = name_to_reg
self.fields = fields
def get_fields(self):
return self.fields
def get_register(self, reg_name):
reg = self.name_to_reg[reg_name]
with self.mutex:
self.spi.spi_send([reg, 0x00, 0x00, 0x00, 0x00])
if self.printer.get_start_args().get('debugoutput') is not None:
return 0
params = self.spi.spi_transfer([reg, 0x00, 0x00, 0x00, 0x00])
pr = bytearray(params['response'])
return (pr[1] << 24) | (pr[2] << 16) | (pr[3] << 8) | pr[4]
def set_register(self, reg_name, val, print_time=None):
minclock = 0
if print_time is not None:
minclock = self.spi.get_mcu().print_time_to_clock(print_time)
reg = self.name_to_reg[reg_name]
data = [(reg | 0x80) & 0xff, (val >> 24) & 0xff, (val >> 16) & 0xff,
(val >> 8) & 0xff, val & 0xff]
with self.mutex:
self.spi.spi_send(data, minclock)
######################################################################
# TMC2130 printer object
######################################################################
class TMC2130:
def __init__(self, config):
# Setup mcu communication
self.fields = tmc.FieldHelper(Fields, SignedFields, FieldFormatters)
self.mcu_tmc = MCU_TMC_SPI(config, Registers, self.fields)
# Allow virtual pins to be created
diag1_pin = config.get('diag1_pin', None)
tmc.TMCVirtualPinHelper(config, self.mcu_tmc, diag1_pin)
# Register commands
cmdhelper = tmc.TMCCommandHelper(config, self.mcu_tmc)
cmdhelper.setup_register_dump(ReadRegisters)
# Setup basic register values
TMCCurrentHelper(config, self.mcu_tmc)
mh = tmc.TMCMicrostepHelper(config, self.mcu_tmc)
self.get_microsteps = mh.get_microsteps
self.get_phase = mh.get_phase
tmc.TMCStealthchopHelper(config, self.mcu_tmc, TMC_FREQUENCY)
# Allow other registers to be set from the config
set_config_field = self.fields.set_config_field
set_config_field(config, "toff", 4)
set_config_field(config, "hstrt", 0)
set_config_field(config, "hend", 7)
set_config_field(config, "TBL", 1)
set_config_field(config, "IHOLDDELAY", 8)
set_config_field(config, "TPOWERDOWN", 0)
set_config_field(config, "PWM_AMPL", 128)
set_config_field(config, "PWM_GRAD", 4)
set_config_field(config, "pwm_freq", 1)
set_config_field(config, "pwm_autoscale", True)
set_config_field(config, "sgt", 0)
def load_config_prefix(config):
return TMC2130(config)
|
