1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
|
# SX1509 Extra
#
# Copyright (C) 2018 Florian Heilmann <Florian.Heilmann@gmx.net>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
import pins
from . import bus
# Word registers
REG_RESET = 0x7D
REG_CLOCK = 0x1E
REG_MISC = 0x1F
REG_DIR = 0x0E
REG_DATA = 0x10
REG_PULLUP = 0x06
REG_PULLDOWN = 0x08
REG_INPUT_DISABLE = 0x00
REG_ANALOG_DRIVER_ENABLE = 0x20
# Byte registers
REG_I_ON = [0x2A, 0x2D, 0x30, 0x33, 0x36, 0x3B, 0x40, 0x45,
0x4A, 0x4D, 0x50, 0x53, 0x56, 0x5B, 0x5F, 0x65]
class SX1509(object):
def __init__(self, config):
self._printer = config.get_printer()
self._name = config.get_name().split()[1]
self._i2c = bus.MCU_I2C_from_config(config, default_speed=400000)
self._ppins = self._printer.lookup_object("pins")
self._ppins.register_chip("sx1509_" + self._name, self)
self._mcu = self._i2c.get_mcu()
self._mcu.register_config_callback(self._build_config)
self._oid = self._i2c.get_oid()
self._last_clock = 0
# Set up registers default values
self.reg_dict = {REG_DIR : 0xFFFF, REG_DATA : 0,
REG_PULLUP : 0, REG_PULLDOWN : 0,
REG_INPUT_DISABLE : 0, REG_ANALOG_DRIVER_ENABLE : 0}
self.reg_i_on_dict = {reg : 0 for reg in REG_I_ON}
def _build_config(self):
# Reset the chip, Default RegClock/RegMisc 0x0
self._mcu.add_config_cmd("i2c_write oid=%d data=%02x%02x" % (
self._oid, REG_RESET, 0x12))
self._mcu.add_config_cmd("i2c_write oid=%d data=%02x%02x" % (
self._oid, REG_RESET, 0x34))
# Enable Oscillator
self._mcu.add_config_cmd("i2c_write oid=%d data=%02x%02x" % (
self._oid, REG_CLOCK, (1 << 6)))
# Setup Clock Divider
self._mcu.add_config_cmd("i2c_write oid=%d data=%02x%02x" % (
self._oid, REG_MISC, (1 << 4)))
# Transfer all regs with their initial cached state
for _reg, _data in self.reg_dict.items():
self._mcu.add_config_cmd("i2c_write oid=%d data=%02x%04x" % (
self._oid, _reg, _data), is_init=True)
def setup_pin(self, pin_type, pin_params):
if pin_type == 'digital_out' and pin_params['pin'][0:4] == "PIN_":
return SX1509_digital_out(self, pin_params)
elif pin_type == 'pwm' and pin_params['pin'][0:4] == "PIN_":
return SX1509_pwm(self, pin_params)
raise pins.error("Wrong pin or incompatible type: %s with type %s! " % (
pin_params['pin'][0:4], pin_type))
def get_mcu(self):
return self._mcu
def get_oid(self):
return self._oid
def clear_bits_in_register(self, reg, bitmask):
if reg in self.reg_dict:
self.reg_dict[reg] &= ~(bitmask)
elif reg in self.reg_i_on_dict:
self.reg_i_on_dict[reg] &= ~(bitmask)
def set_bits_in_register(self, reg, bitmask):
if reg in self.reg_dict:
self.reg_dict[reg] |= bitmask
elif reg in self.reg_i_on_dict:
self.reg_i_on_dict[reg] |= bitmask
def set_register(self, reg, value):
if reg in self.reg_dict:
self.reg_dict[reg] = value
elif reg in self.reg_i_on_dict:
self.reg_i_on_dict[reg] = value
def send_register(self, reg, print_time):
data = [reg & 0xFF]
if reg in self.reg_dict:
# Word
data += [(self.reg_dict[reg] >> 8) & 0xFF,
self.reg_dict[reg] & 0xFF]
elif reg in self.reg_i_on_dict:
# Byte
data += [self.reg_i_on_dict[reg] & 0xFF]
clock = self._mcu.print_time_to_clock(print_time)
self._i2c.i2c_write(data, minclock=self._last_clock, reqclock=clock)
self._last_clock = clock
class SX1509_digital_out(object):
def __init__(self, sx1509, pin_params):
self._sx1509 = sx1509
self._mcu = sx1509.get_mcu()
self._sxpin = int(pin_params['pin'].split('_')[1])
self._bitmask = 1 << self._sxpin
self._pin = pin_params['pin']
self._invert = pin_params['invert']
self._mcu.register_config_callback(self._build_config)
self._start_value = self._shutdown_value = self._invert
self._max_duration = 2.
self._set_cmd = self._clear_cmd = None
# Set direction to output
self._sx1509.clear_bits_in_register(REG_DIR, self._bitmask)
def _build_config(self):
if self._max_duration:
raise pins.error("SX1509 pins are not suitable for heaters")
def get_mcu(self):
return self._mcu
def setup_max_duration(self, max_duration):
self._max_duration = max_duration
def setup_start_value(self, start_value, shutdown_value):
self._start_value = (not not start_value) ^ self._invert
self._shutdown_value = self._invert
# We need to set the start value here so the register is
# updated before the SX1509 class writes it.
if self._start_value:
self._sx1509.set_bits_in_register(REG_DATA, self._bitmask)
else:
self._sx1509.clear_bits_in_register(REG_DATA, self._bitmask)
def set_digital(self, print_time, value):
if int(value) ^ self._invert:
self._sx1509.set_bits_in_register(REG_DATA, self._bitmask)
else:
self._sx1509.clear_bits_in_register(REG_DATA, self._bitmask)
self._sx1509.send_register(REG_DATA, print_time)
def set_pwm(self, print_time, value, cycle_time=None):
self.set_digital(print_time, value >= 0.5)
class SX1509_pwm(object):
def __init__(self, sx1509, pin_params):
self._sx1509 = sx1509
self._mcu = sx1509.get_mcu()
self._sxpin = int(pin_params['pin'].split('_')[1])
self._bitmask = 1 << self._sxpin
self._i_on_reg = REG_I_ON[self._sxpin]
self._pin = pin_params['pin']
self._invert = pin_params['invert']
self._mcu.register_config_callback(self._build_config)
self._start_value = self._shutdown_value = float(self._invert)
self._max_duration = 2.
self._hardware_pwm = False
self._pwm_max = 0.
self._set_cmd = None
self._cycle_time = 0.
# Set required registers
self._sx1509.set_bits_in_register(REG_INPUT_DISABLE, self._bitmask)
self._sx1509.clear_bits_in_register(REG_PULLUP, self._bitmask)
self._sx1509.clear_bits_in_register(REG_DIR, self._bitmask)
self._sx1509.set_bits_in_register(REG_ANALOG_DRIVER_ENABLE,
self._bitmask)
self._sx1509.clear_bits_in_register(REG_DATA, self._bitmask)
def _build_config(self):
if not self._hardware_pwm:
raise pins.error("SX1509_pwm must have hardware_pwm enabled")
if self._max_duration:
raise pins.error("SX1509 pins are not suitable for heaters")
# Send initial value
self._sx1509.set_register(self._i_on_reg,
~int(255 * self._start_value) & 0xFF)
self._mcu.add_config_cmd("i2c_write oid=%d data=%02x%02x" % (
self._sx1509.get_oid(),
self._i_on_reg,
self._sx1509.reg_i_on_dict[self._i_on_reg]
),
is_init=True)
def get_mcu(self):
return self._mcu
def setup_max_duration(self, max_duration):
self._max_duration = max_duration
def setup_cycle_time(self, cycle_time, hardware_pwm=False):
self._cycle_time = cycle_time
self._hardware_pwm = hardware_pwm
def setup_start_value(self, start_value, shutdown_value):
if self._invert:
start_value = 1. - start_value
shutdown_value = 1. - shutdown_value
self._start_value = max(0., min(1., start_value))
self._shutdown_value = max(0., min(1., shutdown_value))
def set_pwm(self, print_time, value):
self._sx1509.set_register(self._i_on_reg, ~int(255 * value)
if not self._invert
else int(255 * value) & 0xFF)
self._sx1509.send_register(self._i_on_reg, print_time)
def load_config_prefix(config):
return SX1509(config)
|
