1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
|
# adds support fro ARC commands via G2/G3
#
# Copyright (C) 2019 Aleksej Vasiljkovic <achmed21@gmail.com>
#
# function planArc() originates from https://github.com/MarlinFirmware/Marlin
# Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
#
# This file may be distributed under the terms of the GNU GPLv3 license.
# uses the plan_arc function from marlin which does steps in mm rather then
# in degrees. # Coordinates created by this are converted into G1 commands.
#
# note: only IJ version available
import math
import re
class ArcSupport:
def __init__(self, config):
self.printer = config.get_printer()
self.mm_per_arc_segment = config.getfloat('resolution', 1, above=0.0)
self.gcode = self.printer.lookup_object('gcode')
self.gcode.register_command("G2", self.cmd_G2, desc=self.cmd_G2_help)
self.gcode.register_command("G3", self.cmd_G2, desc=self.cmd_G3_help)
cmd_G2_help = "Counterclockwise rotation move"
cmd_G3_help = "Clockwise rotaion move"
def cmd_G2(self, params):
# set vars
currentPos = self.printer.lookup_object('toolhead').get_position()
asX = params.get("X", None)
asY = params.get("Y", None)
asZ = params.get("Z", None)
asR = float(params.get("R", 0.)) #radius
asI = float(params.get("I", 0.))
asJ = float(params.get("J", 0.))
asE = float(params.get("E", 0.))
asF = float(params.get("F", -1))
# --------- health checks of code -----------
if (asX is None or asY is None):
raise self.gcode.error("g2/g3: Coords missing")
elif asR == 0 and asI == 0 and asJ==0:
raise self.gcode.error("g2/g3: neither R nor I and J given")
elif asR > 0 and (asI !=0 or asJ!=0):
raise self.gcode.error("g2/g3: R, I and J were given. Invalid")
else: # -------- execute conversion -----------
coords = []
clockwise = params['#command'].lower().startswith("g2")
asY = float(asY)
asX = float(asX)
# use radius
# if asR > 0:
# not sure if neccessary since R barely seems to be used
# use IJK
if asI != 0 or asJ!=0:
coords = self.planArc(currentPos,
[asX,asY,0.,0.],
[asI, asJ],
clockwise)
###############################
# converting coords into G1 codes (lazy aproch)
if len(coords)>0:
# build dict and call cmd_G1
for coord in coords:
g1_params = {'X': coord[0], 'Y': coord[1]}
if asZ!=None:
g1_params['Z']= float(asZ)
if asE>0:
g1_params['E']= float(asE)/len(coords)
if asF>0:
g1_params['F']= asF
self.gcode.cmd_G1(g1_params)
else:
self.gcode.respond_info(
"could not tranlate from '" + params['#original'] + "'")
# function planArc() originates from marlin plan_arc()
# https://github.com/MarlinFirmware/Marlin
#
# The arc is approximated by generating many small linear segments.
# The length of each segment is configured in MM_PER_ARC_SEGMENT
# Arcs smaller then this value, will be a Line only
def planArc(
self,
currentPos,
targetPos=[0.,0.,0.,0.],
offset=[0.,0.],
clockwise=False):
# todo: sometimes produces full circles
coords = []
MM_PER_ARC_SEGMENT = self.mm_per_arc_segment
X_AXIS = 0
Y_AXIS = 1
Z_AXIS = 2
# Radius vector from center to current location
r_P = offset[0]*-1
r_Q = offset[1]*-1
radius = math.hypot(r_P, r_Q)
center_P = currentPos[X_AXIS] - r_P
center_Q = currentPos[Y_AXIS] - r_Q
rt_X = targetPos[X_AXIS] - center_P
rt_Y = targetPos[Y_AXIS] - center_Q
linear_travel = targetPos[Z_AXIS] - currentPos[Z_AXIS]
angular_travel = math.atan2(r_P * rt_Y - r_Q * rt_X,
r_P * rt_X + r_Q * rt_Y)
if (angular_travel < 0): angular_travel+= math.radians(360)
if (clockwise): angular_travel-= math.radians(360)
# Make a circle if the angular rotation is 0
# and the target is current position
if (angular_travel == 0
and currentPos[X_AXIS] == targetPos[X_AXIS]
and currentPos[Y_AXIS] == targetPos[Y_AXIS]):
angular_travel = math.radians(360)
flat_mm = radius * angular_travel
mm_of_travel = linear_travel
if(mm_of_travel == linear_travel):
mm_of_travel = math.hypot(flat_mm, linear_travel)
else:
mm_of_travel = math.abs(flat_mm)
if (mm_of_travel < 0.001):
return coords
segments = int(math.floor(mm_of_travel / (MM_PER_ARC_SEGMENT)))
if(segments<1):
segments=1
raw = [0.,0.,0.,0.]
theta_per_segment = float(angular_travel / segments)
linear_per_segment = float(linear_travel / segments)
# Initialize the linear axis
raw[Z_AXIS] = currentPos[Z_AXIS];
for i in range(1,segments+1):
cos_Ti = math.cos(i * theta_per_segment)
sin_Ti = math.sin(i * theta_per_segment)
r_P = -offset[0] * cos_Ti + offset[1] * sin_Ti
r_Q = -offset[0] * sin_Ti - offset[1] * cos_Ti
raw[X_AXIS] = center_P + r_P
raw[Y_AXIS] = center_Q + r_Q
raw[Z_AXIS] += linear_per_segment
coords.append([raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS] ])
return coords
def load_config(config):
return ArcSupport(config)
|
