1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
|
# AHT10/AHT20/AHT21 I2c-based humiditure sensor support
#
# Copyright (C) 2023 Scott Mudge <mail@scottmudge.com>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
import logging
from . import bus
######################################################################
# Compatible Sensors:
# AHT10 - Tested w/ BTT GTR 1.0 MCU on i2c3
# AHT20 - Untested but should work
# AHT21 - Tested w/ BTT GTR 1.0 MCU on i2c3
######################################################################
AHT10_I2C_ADDR= 0x38
AHT10_COMMANDS = {
'INIT' :[0xE1, 0x08, 0x00],
'MEASURE' :[0xAC, 0x33, 0x00],
'RESET' :[0xBA, 0x08, 0x00]
}
AHT10_MAX_BUSY_CYCLES= 5
class AHT10:
def __init__(self, config):
self.printer = config.get_printer()
self.name = config.get_name().split()[-1]
self.reactor = self.printer.get_reactor()
self.i2c = bus.MCU_I2C_from_config(
config, default_addr=AHT10_I2C_ADDR, default_speed=100000)
self.report_time = config.getint('aht10_report_time',30,minval=5)
self.temp = self.min_temp = self.max_temp = self.humidity = 0.
self.sample_timer = self.reactor.register_timer(self._sample_aht10)
self.printer.add_object("aht10 " + self.name, self)
self.printer.register_event_handler("klippy:connect",
self.handle_connect)
self.is_calibrated = False
self.init_sent = False
def handle_connect(self):
self._init_aht10()
self.reactor.update_timer(self.sample_timer, self.reactor.NOW)
def setup_minmax(self, min_temp, max_temp):
self.min_temp = min_temp
self.max_temp = max_temp
def setup_callback(self, cb):
self._callback = cb
def get_report_time_delta(self):
return self.report_time
def _make_measurement(self):
if not self.init_sent:
return False
data = None
is_busy = True
cycles = 0
try:
while is_busy:
# Check if we're constantly busy. If so, send soft-reset
# and issue warning.
if is_busy and cycles > AHT10_MAX_BUSY_CYCLES:
logging.warning("aht10: device reported busy after " +
"%d cycles, resetting device"% AHT10_MAX_BUSY_CYCLES)
self._reset_device()
data = None
break
cycles += 1
# Write command for updating temperature+status bit
self.i2c.i2c_write(AHT10_COMMANDS['MEASURE'])
# Wait 110ms after first read, 75ms minimum
self.reactor.pause(self.reactor.monotonic() + .110)
# Read data
read = self.i2c.i2c_read([], 6)
if read is None:
logging.warning("aht10: received data from" +
" i2c_read is None")
continue
data = bytearray(read['response'])
if len(data) < 6:
logging.warning("aht10: received bytes less than" +
" expected 6 [%d]"%len(data))
continue
self.is_calibrated = True if (data[0] & 0b00000100) else False
is_busy = True if (data[0] & 0b01000000) else False
if is_busy:
return False
except Exception as e:
logging.exception("aht10: exception encountered" +
" reading data: %s"%str(e))
return False
temp = ((data[3] & 0x0F) << 16) | (data[4] << 8) | data[5]
self.temp = ((temp*200) / 1048576) - 50
hum = ((data[1] << 16) | (data[2] << 8) | data[3]) >> 4
self.humidity = int(hum * 100 / 1048576)
# Clamp humidity
if (self.humidity > 100):
self.humidity = 100
elif (self.humidity < 0):
self.humidity = 0
return True
def _reset_device(self):
if not self.init_sent:
return
# Reset device
self.i2c.i2c_write(AHT10_COMMANDS['RESET'])
# Wait 100ms after reset
self.reactor.pause(self.reactor.monotonic() + .10)
def _init_aht10(self):
# Init device
self.i2c.i2c_write(AHT10_COMMANDS['INIT'])
# Wait 100ms after init
self.reactor.pause(self.reactor.monotonic() + .10)
self.init_sent = True
if self._make_measurement():
logging.info("aht10: successfully initialized, initial temp: " +
"%.3f, humidity: %.3f"%(self.temp, self.humidity))
def _sample_aht10(self, eventtime):
if not self._make_measurement():
self.temp = self.humidity = .0
return self.reactor.NEVER
if self.temp < self.min_temp or self.temp > self.max_temp:
self.printer.invoke_shutdown(
"AHT10 temperature %0.1f outside range of %0.1f:%.01f"
% (self.temp, self.min_temp, self.max_temp))
measured_time = self.reactor.monotonic()
print_time = self.i2c.get_mcu().estimated_print_time(measured_time)
self._callback(print_time, self.temp)
return measured_time + self.report_time
def get_status(self, eventtime):
return {
'temperature': round(self.temp, 2),
'humidity': self.humidity,
}
def load_config(config):
# Register sensor
pheater = config.get_printer().lookup_object("heaters")
pheater.add_sensor_factory("AHT10", AHT10)
|
