blob: 692408adbbe29771e1809654242260235194a293 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
|
# This file contains an example configuration with RPi as secondary mcu
# See both the example.cfg and example-extras.cfg file for a
# description of available parameters.
# The rpi microcontroller is used as secondary.
# Typically, both the X and Y axes
# are connected to the main micro-controller. The rpi microcontroller is used
# on non time-critical functions such as enclosure sensors, additional fan or
# light sources
[mcu host]
serial: /tmp/klipper_host_mcu
# Example1: A led strip controlled by the GPIO20 on the RPi
[output_pin caselight]
pin: host:gpio20
# You can also write the pin in extended form by specifying
# the reference gpiochip.
#pin: host:gpiochip0/gpio20
[gcode_macro TOGGLE_CASELIGHT]
gcode:
SET_PIN PIN=caselight VALUE={(not printer['output_pin caselight'].value)|int}
# Example2: Using the i2c bus of the RPi to read a sensor
[temperature_sensor enclosure_temp]
sensor_type: HTU21D
i2c_mcu: host
i2c_bus: i2c.1
htu21d_hold_master: False
[gcode_macro QUERY_ENCLOSURE]
default_parameter_SENSOR: htu21d enclosure_temp
gcode:
{action_respond_info(
"Temperature: %.2f C\n"
"Humidity: %.2f%%" % (
printer[SENSOR].temperature,
printer[SENSOR].humidity))}
# Example 3:Using a pin on another gpiochip connected to the RPi
# (in this case on an MCP23017)
[fan]
pin: host:gpiochip2/gpio7
|
