1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
|
# This file contains pin mappings for the Eryone Thinker Series V2.
# To use this config, the firmware should be compiled for the AVR atmega2560.
# Extra settings to support BL Touch, Filament Runout sensor, TMC2209 and
# have setting for fixing GCode errors, these configus can be found on
# Eryone's Facebook Group under files.
# Facebook like to files: https://www.facebook.com/groups/247271792709370/files
# Config file: printer.cfg.ThinkS-BLTouch-Runout-TMC2209-dapostol73.txt
# See docs/Config_Reference.md for a description of parameters.
[stepper_x]
step_pin: PC0
dir_pin: !PL1
enable_pin: !PA7
microsteps: 16
rotation_distance: 40
endstop_pin: !PB6
position_min: -5
position_endstop: -5
position_max: 300
homing_speed: 50
[stepper_y]
step_pin: PC1
dir_pin: PL0
enable_pin: !PA6
microsteps: 16
rotation_distance: 40
endstop_pin: !PB5
position_min: -5
position_endstop: -5
position_max: 300
homing_speed: 50
[stepper_z]
step_pin: PC2
dir_pin: PL2
enable_pin: !PA5
microsteps: 16
rotation_distance: 8
position_max: 400
homing_speed: 5
endstop_pin: !PB4
position_endstop: 0
[extruder]
step_pin: PC3
dir_pin: !PL6
enable_pin: !PA4
microsteps: 16
# Stock extruder [200 steps/rot]*[16 steps]/[93 steps/mm]
rotation_distance: 34.4
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PH6
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PF0
control: pid
pid_kp: 22.2
pid_ki: 1.08
pid_kd: 144
min_temp: 0
max_temp: 250
max_extrude_only_distance: 300
[fan]
pin: PH5
[heater_fan heatbreak_cooling_fan]
pin: PH3
[heater_bed]
heater_pin: PE5
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PF2
control: pid
pid_kp: 100.0
pid_ki: 5.023
pid_kd: 305.4
min_temp: 0
max_temp: 100
[mcu]
serial: /dev/serial/by-id/usb-1a86_USB_Serial-if00-port0
restart_method: command
[printer]
kinematics: cartesian
max_velocity: 300
max_accel: 1500
max_z_velocity: 5
max_z_accel: 150
######################################################################
# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
######################################################################
[display]
lcd_type: st7920
cs_pin: EXP1_4
sclk_pin: EXP1_5
sid_pin: EXP1_3
encoder_pins: ^EXP2_3, ^EXP2_5
click_pin: ^!EXP1_2
#kill_pin: ^!EXP2_8
[output_pin beeper]
pin: EXP1_1
pwm: True
value: 0
shutdown_value: 0
cycle_time: 0.001
scale: 1000
# Enable 16 micro-steps on steppers X, Y, Z, E0
[static_digital_output stepper_config]
pins:
PG1, PG0,
PK7, PG2,
PK6, PK5,
PK3, PK4
[static_digital_output yellow_led]
pins: !PB7
# Common EXP1 / EXP2 (display) pins
[board_pins]
aliases:
# Common EXP1/EXP2 headers found on RAMBo v1.4
EXP1_1=PE6, EXP1_3=PG3, EXP1_5=PJ2, EXP1_7=PJ7, EXP1_9=<GND>,
EXP1_2=PE2, EXP1_4=PG4, EXP1_6=PJ3, EXP1_8=PJ4, EXP1_10=<5V>,
# EXP2 header
EXP2_1=PB3, EXP2_3=PK2, EXP2_5=PK1, EXP2_7=PD4, EXP2_9=<GND>,
EXP2_2=PB1, EXP2_4=PB0, EXP2_6=PB2, EXP2_8=PE7, EXP2_10=PH2
# Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi"
|
