aboutsummaryrefslogtreecommitdiffstats
path: root/src
Commit message (Expand)AuthorAgeFilesLines
* rp2040: Suppress spurious gcc v12 array bounds warningKevin O'Connor2022-09-291-3/+13
* thermocouple: Only shutdown on multiple consecutive sensor errorsKevin O'Connor2022-09-231-4/+10
* thermocouple: Report fault information in fault fieldKevin O'Connor2022-09-231-12/+6
* stm32l4: add stm32l412 support with adc,i2c,spi,usbMatt Baker2022-09-158-32/+305
* samd21: fix erroneous register bit reference.Matt Baker2022-09-111-2/+0
* stm32: Fix i2c on stm32g0Kevin O'Connor2022-09-112-0/+34
* stm32: Add a gpio_valid() helper functionKevin O'Connor2022-09-051-12/+12
* serial_irq: Support side channel for entering bootloaderKevin O'Connor2022-09-054-0/+7
* lpc176x: Move bootloader_request() from usbserial.c to main.cKevin O'Connor2022-09-053-12/+23
* stm32f0: implement i2c_read endpointMatt Baker2022-09-011-1/+20
* stm32: Add Hardware PWM support for STM32G0 processors (#5714)Ben Jackson2022-09-013-4/+66
* stm32: add FDCAN support for STM32H743 (SKR-3 Series) (#5668)BIGTREETECH2022-08-233-8/+85
* stm32: Fix the STM32H743 mcu temp on SKR 3 (#5711)adelyser2022-08-191-1/+1
* rp2040: Enabled hw pullups for the I2C pins (#5710)chestwood962022-08-191-2/+2
* atsamd: Use CONFIG_USB instead of CONFIG_USBSERIAL during clock initKevin O'Connor2022-08-162-2/+2
* stm32: Use new CONFIG_USB to determine if USB needs to be configuredKevin O'Connor2022-08-165-12/+14
* canserial: Fix typo in canserial.hKevin O'Connor2022-07-291-1/+1
* stm32: Remove stm32f4 canbus warningKevin O'Connor2022-07-291-1/+0
* mcu: Delay reset signaling for usb to canbus bridge nodesKevin O'Connor2022-07-291-0/+3
* canserial: Request bootloader via bootloader_request()Kevin O'Connor2022-07-291-2/+1
* usb_cdc: Rename usb_request_bootloader() to bootloader_request()Kevin O'Connor2022-07-2914-32/+45
* serialqueue: Improve canbus timingKevin O'Connor2022-07-291-0/+4
* stm32: Add CCRDY check to stm32g0 adcKevin O'Connor2022-07-251-0/+9
* rp2040: Add support for USB to CANbus bridge modeKevin O'Connor2022-07-062-0/+6
* rp2040: Initial support for CANbusKevin O'Connor2022-07-064-7/+104
* stm32: stm32g0/h7 usb_dfu_bootloader support (#5596)BIGTREETECH2022-06-302-1/+34
* usb_canbus: Initial support for USB to CAN bridge modeKevin O'Connor2022-06-277-15/+751
* canserial: Rename canbus.c to canserial.cKevin O'Connor2022-06-279-332/+385
* usb_cdc_ep: Change default endpoint numbersKevin O'Connor2022-06-272-3/+3
* stm32: Add support for disabling the canbus filterKevin O'Connor2022-06-273-7/+18
* stm32: Add MCU temp for Stm32h7 (#5606)adelyser2022-06-271-2/+11
* rp2040: Add a Kconfig option for selecting "generic_03H" flash typeKevin O'Connor2022-06-201-0/+10
* rp2040: Add options to Kconfig for "stage2" flash chip optionsKevin O'Connor2022-06-202-2/+17
* stm32: Add Kconfig option for stm32f103x6 chip (with only 10KiB ram)Kevin O'Connor2022-06-201-1/+6
* stm32: support stm32f401 adc_temperature sensor (#5572)Kamil Trzciński2022-06-201-2/+4
* Kconfig: Move SERIAL, USBSERIAL, and CANSERIAL definitions to src/KconfigKevin O'Connor2022-06-166-22/+6
* mpu9250: Adding support for MPU-9250 (and MPU-6050) accelerometerbluesforte2022-06-164-4/+298
* canbus: Move canbus uuid calculation to canbus.cKevin O'Connor2022-06-167-25/+21
* stm32: Support passing through RTR and EFF canbus framesKevin O'Connor2022-06-163-28/+39
* stm32: Support PA11/PA12 and PB8/PB9 on fdcanKevin O'Connor2022-06-162-16/+20
* stm32: Simplify fdcan tx irq handlingKevin O'Connor2022-06-161-8/+4
* canbus: Use single method for reading canbus messagesKevin O'Connor2022-06-164-198/+125
* canbus: Move global variables into a structKevin O'Connor2022-06-161-55/+65
* rp2040: Implement workaround for USB errata "rp2040-e5"Kevin O'Connor2022-06-121-3/+99
* stm32: Support 4KiB bootloader on stm32f1 and stm32f0Kevin O'Connor2022-06-101-0/+3
* lpc176x: add support for canboot usbEric Callahan2022-06-101-0/+2
* ds18b20: Allow some read errorsfunctionpointer2022-06-081-22/+33
* stm32: Enable Automatic retransmission feature to avoid data loss caused by b...BIGTREETECH2022-06-061-2/+0
* Kconfig: Move CANBUS_FREQUENCY definition from src/stm32/Kconfig to src/KconfigKevin O'Connor2022-06-042-4/+5
* armcm_reset: Add a armcm_reset.h header file for try_request_canboot()Kevin O'Connor2022-06-049-9/+18
generated by cgit v1.2.3-70-g09d2 (git 2.50.1) at 2025-09-01 22:12:50 +0000