diff options
Diffstat (limited to 'test/klippy/z_tilt.cfg')
| -rw-r--r-- | test/klippy/z_tilt.cfg | 21 |
1 files changed, 14 insertions, 7 deletions
diff --git a/test/klippy/z_tilt.cfg b/test/klippy/z_tilt.cfg index fdb54ff1..323bc8ce 100644 --- a/test/klippy/z_tilt.cfg +++ b/test/klippy/z_tilt.cfg @@ -3,7 +3,8 @@ step_pin: ar54 dir_pin: ar55 enable_pin: !ar38 -step_distance: .0125 +microsteps: 16 +rotation_distance: 40 endstop_pin: ^ar3 position_endstop: 0 position_max: 250 @@ -13,7 +14,8 @@ homing_speed: 50 step_pin: ar60 dir_pin: !ar61 enable_pin: !ar56 -step_distance: .0125 +microsteps: 16 +rotation_distance: 40 endstop_pin: ^ar14 position_endstop: 0 position_max: 250 @@ -23,7 +25,8 @@ homing_speed: 50 step_pin: ar46 dir_pin: ar48 enable_pin: !ar62 -step_distance: .0025 +microsteps: 16 +rotation_distance: 8 endstop_pin: ^ar18 position_endstop: 0.5 position_max: 250 @@ -32,19 +35,22 @@ position_max: 250 step_pin: ar36 dir_pin: ar34 enable_pin: !ar30 -step_distance: .0025 +microsteps: 16 +rotation_distance: 8 endstop_pin: ^ar19 [stepper_z2] step_pin: ar16 dir_pin: ar17 enable_pin: !ar23 -step_distance: .0025 +microsteps: 16 +rotation_distance: 8 [stepper_z3] step_pin: ar5 dir_pin: ar4 -step_distance: .0025 +microsteps: 16 +rotation_distance: 8 [quad_gantry_level] gantry_corners: @@ -79,7 +85,8 @@ points: step_pin: ar26 dir_pin: ar28 enable_pin: !ar24 -step_distance: .002 +microsteps: 16 +rotation_distance: 33.5 nozzle_diameter: 0.400 filament_diameter: 1.750 heater_pin: ar10 |