diff options
Diffstat (limited to 'test/klippy/macros.cfg')
| -rw-r--r-- | test/klippy/macros.cfg | 39 |
1 files changed, 19 insertions, 20 deletions
diff --git a/test/klippy/macros.cfg b/test/klippy/macros.cfg index 9ecf0228..669c9be3 100644 --- a/test/klippy/macros.cfg +++ b/test/klippy/macros.cfg @@ -1,47 +1,47 @@ # Test config with macros [stepper_x] -step_pin: ar54 -dir_pin: ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: PF1 +enable_pin: !PD7 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar3 +endstop_pin: ^PE5 position_endstop: 0 position_max: 200 homing_speed: 50 [stepper_y] -step_pin: ar60 -dir_pin: !ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: !PF7 +enable_pin: !PF2 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar14 +endstop_pin: ^PJ1 position_endstop: 0 position_max: 200 homing_speed: 50 [stepper_z] -step_pin: ar46 -dir_pin: ar48 -enable_pin: !ar62 +step_pin: PL3 +dir_pin: PL1 +enable_pin: !PK0 microsteps: 16 rotation_distance: 8 -endstop_pin: ^ar18 +endstop_pin: ^PD3 position_endstop: 0.5 position_max: 200 [extruder] -step_pin: ar26 -dir_pin: ar28 -enable_pin: !ar24 +step_pin: PA4 +dir_pin: PA6 +enable_pin: !PA2 microsteps: 16 rotation_distance: 33.5 nozzle_diameter: 0.500 filament_diameter: 3.500 -heater_pin: ar10 +heater_pin: PB4 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog13 +sensor_pin: PK5 control: pid pid_Kp: 22.2 pid_Ki: 1.08 @@ -50,16 +50,15 @@ min_temp: 0 max_temp: 210 [heater_bed] -heater_pin: ar8 +heater_pin: PH5 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog14 +sensor_pin: PK6 control: watermark min_temp: 0 max_temp: 110 [mcu] serial: /dev/ttyACM0 -pin_map: arduino [printer] kinematics: cartesian |