1 files changed, 0 insertions, 148 deletions
diff --git a/src/stm32f1/main.c b/src/stm32f1/main.c
deleted file mode 100644
index d9bdbb24..00000000
--- a/src/stm32f1/main.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// Main starting point for STM32F103 boards.
-//
-// Copyright (C) 2018 Grigori Goronzy <greg@kinoho.net>
-//
-// This file may be distributed under the terms of the GNU GPLv3 license.
-
-#include "autoconf.h"
-#include "board/internal.h" // udelay
-#include "board/misc.h" // timer_read_time
-#include "command.h" // DECL_CONSTANT
-#include "stm32f1xx.h"
-#include "stm32f1xx_ll_system.h"
-#include "stm32f1xx_ll_utils.h"
-#include "stm32f1xx_ll_bus.h"
-#include "stm32f1xx_ll_rcc.h"
-#include "stm32f1xx_ll_iwdg.h"
-#include "stm32f1xx_ll_gpio.h"
-#include "stm32f1xx_ll_adc.h"
-#include "stm32f1xx_ll_spi.h"
-#include "sched.h" // sched_main
-
-DECL_CONSTANT_STR("MCU", "stm32f103");
-
-
-/****************************************************************
- * dynamic memory pool
- ****************************************************************/
-
-static char dynmem_pool[15 * 1024];
-
-// Return the start of memory available for dynamic allocations
-void *
-dynmem_start(void)
-{
-    return dynmem_pool;
-}
-
-// Return the end of memory available for dynamic allocations
-void *
-dynmem_end(void)
-{
-    return &dynmem_pool[sizeof(dynmem_pool)];
-}
-
-
-/****************************************************************
- * watchdog handler
- ****************************************************************/
-
-void
-watchdog_reset(void)
-{
-    LL_IWDG_ReloadCounter(IWDG);
-}
-DECL_TASK(watchdog_reset);
-
-void
-watchdog_init(void)
-{
-    LL_IWDG_EnableWriteAccess(IWDG);
-    /* IWDG timer is 40 KHz, configure to trigger every seconds */
-    LL_IWDG_SetPrescaler(IWDG, LL_IWDG_PRESCALER_16);
-    LL_IWDG_SetReloadCounter(IWDG, 2500);
-    LL_IWDG_Enable(IWDG);
-
-}
-DECL_INIT(watchdog_init);
-
-
-/****************************************************************
- * misc functions
- ****************************************************************/
-
-void
-command_reset(uint32_t *args)
-{
-    NVIC_SystemReset();
-}
-DECL_COMMAND_FLAGS(command_reset, HF_IN_SHUTDOWN, "reset");
-
-void clock_config(void)
-{
-    LL_RCC_HSE_Enable();
-    while (!LL_RCC_HSE_IsReady());
-    LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE, LL_RCC_PLL_MUL_9);
-    LL_RCC_PLL_Disable();
-    LL_RCC_PLL_Enable();
-    while (!LL_RCC_PLL_IsReady());
-    LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
-    LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_2);
-    LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_2);
-    LL_RCC_SetADCClockSource(LL_RCC_ADC_CLKSRC_PCLK2_DIV_4);
-    LL_FLASH_SetLatency(LL_FLASH_LATENCY_2);
-    LL_FLASH_EnablePrefetch();
-    LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
-    SystemCoreClockUpdate();
-    LL_Init1msTick(SystemCoreClock);
-}
-
-void adc_config(void)
-{
-    LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_ADC1);
-    /* ADC might be in deep sleep, needs to be woken up twice in that case */
-    LL_ADC_Enable(ADC1);
-    LL_mDelay(1);
-    LL_ADC_Enable(ADC1);
-    LL_mDelay(1);
-    LL_ADC_StartCalibration(ADC1);
-    while (LL_ADC_IsCalibrationOnGoing(ADC1));
-    LL_ADC_SetSequencersScanMode(ADC1, LL_ADC_SEQ_SCAN_DISABLE);
-    LL_ADC_REG_SetTriggerSource(ADC1, LL_ADC_REG_TRIG_SOFTWARE);
-    LL_ADC_REG_SetSequencerLength(ADC1, LL_ADC_REG_SEQ_SCAN_DISABLE);
-}
-
-void spi_config(void)
-{
-    LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_SPI2);
-}
-
-void io_config(void)
-{
-    LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_AFIO);
-    LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_GPIOA);
-    LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_GPIOB);
-    LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_GPIOC);
-    LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_GPIOD);
-    LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_GPIOE);
-    /* JTAG is normally not needed, but blocks ports like PB3, PB4 */
-    LL_GPIO_AF_Remap_SWJ_NOJTAG();
-    /* Likewise, we don't need PB3 for TRACESWO output */
-    LL_DBGMCU_SetTracePinAssignment(LL_DBGMCU_TRACE_NONE);
-}
-
-// Main entry point
-int
-main(void)
-{
-    SystemInit();
-    SCB->VTOR += CONFIG_FLASH_START;
-
-    LL_Init1msTick(SystemCoreClock);
-    clock_config();
-    adc_config();
-    io_config();
-    spi_config();
-    sched_main();
-    return 0;
-}