1 files changed, 0 insertions, 79 deletions
diff --git a/src/stm32f0/log.c b/src/stm32f0/log.c
deleted file mode 100644
index be9c48b1..00000000
--- a/src/stm32f0/log.c
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * log.c
- * This file not required for regular Klipper usage, but hw/sw developer
- * can use USART TX pin instead SWO for debugging purposes
- *
- *  Copyright (C) 2019 Eug Krashtan <eug.krashtan@gmail.com>
- *  This file may be distributed under the terms of the GNU GPLv3 license.
- */
-
-#include "string.h"
-#include "stm32f0xx_hal.h"
-#include "log.h"
-
-UART_HandleTypeDef huart2;
-
-void LogInit(void)
-{
-    huart2.Instance = USART2;
-    huart2.Init.BaudRate = 115200;
-    huart2.Init.WordLength = UART_WORDLENGTH_8B;
-    huart2.Init.StopBits = UART_STOPBITS_1;
-    huart2.Init.Parity = UART_PARITY_NONE;
-    huart2.Init.Mode = UART_MODE_TX;
-    huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
-    huart2.Init.OverSampling = UART_OVERSAMPLING_16;
-    huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
-    huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
-    HAL_UART_Init(&huart2);
-
-    lprint("hello");
-}
-
-/**
-* @brief String out
-* @param msg: Null-terminated string
-* @retval None
-*/
-void lprint(char *msg)
-{
-    HAL_UART_Transmit(&huart2, (uint8_t *)msg, strlen(msg), 100);
-}
-
-/**
-* @brief Binary data out
-* @param msg: binary data
-* @param len: data length
-* @retval None
-*/
-void lnprint(char *msg, size_t len)
-{
-    HAL_UART_Transmit(&huart2, (uint8_t *)msg, len, 100);
-}
-
-/**
-* @brief UART MSP Initialization
-* @param huart: UART handle pointer
-* @retval None
-*/
-void HAL_UART_MspInit(UART_HandleTypeDef* huart)
-{
-
-  GPIO_InitTypeDef GPIO_InitStruct = {0};
-  if(huart->Instance==USART2)
-  {
-    __HAL_RCC_USART2_CLK_ENABLE();
-
-    __HAL_RCC_GPIOA_CLK_ENABLE();
-    /**USART2 GPIO Configuration
-    PA2     ------> USART2_TX
-    PA3     ------> USART2_RX
-    */
-    GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_NOPULL;
-    GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
-    GPIO_InitStruct.Alternate = GPIO_AF1_USART2;
-    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-  }
-}