1 files changed, 0 insertions, 106 deletions
diff --git a/src/stm32/stm32h7_serial.c b/src/stm32/stm32h7_serial.c
deleted file mode 100644
index b5070290..00000000
--- a/src/stm32/stm32h7_serial.c
+++ /dev/null
@@ -1,106 +0,0 @@
-// STM32H7 serial
-//
-// Copyright (C) 2019  Kevin O'Connor <kevin@koconnor.net>
-//
-// This file may be distributed under the terms of the GNU GPLv3 license.
-
-#include "autoconf.h" // CONFIG_SERIAL_BAUD
-#include "board/armcm_boot.h" // armcm_enable_irq
-#include "board/serial_irq.h" // serial_rx_byte
-#include "command.h" // DECL_CONSTANT_STR
-#include "internal.h" // enable_pclock
-#include "sched.h" // DECL_INIT
-
-// Select the configured serial port
-#if CONFIG_STM32_SERIAL_USART1
-  DECL_CONSTANT_STR("RESERVE_PINS_serial", "PA10,PA9");
-  #define GPIO_Rx GPIO('A', 10)
-  #define GPIO_Tx GPIO('A', 9)
-  #define USARTx USART1
-  #define USARTx_IRQn USART1_IRQn
-#elif CONFIG_STM32_SERIAL_USART1_ALT_PB7_PB6
-  DECL_CONSTANT_STR("RESERVE_PINS_serial", "PB7,PB6");
-  #define GPIO_Rx GPIO('B', 7)
-  #define GPIO_Tx GPIO('B', 6)
-  #define USARTx USART1
-  #define USARTx_IRQn USART1_IRQn
-#elif CONFIG_STM32_SERIAL_USART2
-  DECL_CONSTANT_STR("RESERVE_PINS_serial", "PA3,PA2");
-  #define GPIO_Rx GPIO('A', 3)
-  #define GPIO_Tx GPIO('A', 2)
-  #define USARTx USART2
-  #define USARTx_IRQn USART2_IRQn
-#elif CONFIG_STM32_SERIAL_USART2_ALT_PD6_PD5
-  DECL_CONSTANT_STR("RESERVE_PINS_serial", "PD6,PD5");
-  #define GPIO_Rx GPIO('D', 6)
-  #define GPIO_Tx GPIO('D', 5)
-  #define USARTx USART2
-  #define USARTx_IRQn USART2_IRQn
-#elif CONFIG_STM32_SERIAL_USART3
-  DECL_CONSTANT_STR("RESERVE_PINS_serial", "PB11,PB10");
-  #define GPIO_Rx GPIO('B', 11)
-  #define GPIO_Tx GPIO('B', 10)
-  #define USARTx USART3
-  #define USARTx_IRQn USART3_IRQn
-#elif CONFIG_STM32_SERIAL_USART3_ALT_PD9_PD8
-  DECL_CONSTANT_STR("RESERVE_PINS_serial", "PD9,PD8");
-  #define GPIO_Rx GPIO('D', 9)
-  #define GPIO_Tx GPIO('D', 8)
-  #define USARTx USART3
-  #define USARTx_IRQn USART3_IRQn
-#elif CONFIG_STM32_SERIAL_UART4
-  DECL_CONSTANT_STR("RESERVE_PINS_serial", "PA1,PA0");
-  #define GPIO_Rx GPIO('A', 1)
-  #define GPIO_Tx GPIO('A', 0)
-  #define USARTx UART4
-  #define USARTx_IRQn UART4_IRQn
-  #define USARTx_FUNCTION GPIO_FUNCTION(8)
-#endif
-
-#ifndef USARTx_FUNCTION
-  #define USARTx_FUNCTION GPIO_FUNCTION(7)
-#endif
-
-#define CR1_FLAGS (USART_CR1_UE | USART_CR1_RE | USART_CR1_TE   \
-                   | USART_CR1_RXNEIE)
-
-void
-USARTx_IRQHandler(void)
-{
-    uint32_t isr = USARTx->ISR;
-    if (isr & USART_ISR_RXNE_RXFNE)
-        serial_rx_byte(USARTx->RDR);
-    //USART_ISR_TXE_TXFNF only works with Fifo mode disabled
-    if (isr & USART_ISR_TXE_TXFNF && USARTx->CR1 & USART_CR1_TXEIE) {
-        uint8_t data;
-        int ret = serial_get_tx_byte(&data);
-        if (ret)
-            USARTx->CR1 = CR1_FLAGS;
-        else
-            USARTx->TDR = data;
-    }
-}
-
-void
-serial_enable_tx_irq(void)
-{
-    USARTx->CR1 = CR1_FLAGS | USART_CR1_TXEIE;
-}
-
-void
-serial_init(void)
-{
-    enable_pclock((uint32_t)USARTx);
-
-    uint32_t pclk = get_pclock_frequency((uint32_t)USARTx);
-    uint32_t div = DIV_ROUND_CLOSEST(pclk, CONFIG_SERIAL_BAUD);
-    USARTx->BRR = (((div / 16) << USART_BRR_DIV_MANTISSA_Pos)
-                 | ((div % 16) << USART_BRR_DIV_FRACTION_Pos));
-    USARTx->CR3 = USART_CR3_OVRDIS; // disable the ORE ISR
-    USARTx->CR1 = CR1_FLAGS;
-    armcm_enable_irq(USARTx_IRQHandler, USARTx_IRQn, 0);
-
-    gpio_peripheral(GPIO_Rx, USARTx_FUNCTION, 1);
-    gpio_peripheral(GPIO_Tx, USARTx_FUNCTION, 0);
-}
-DECL_INIT(serial_init);