diff options
Diffstat (limited to 'src/avr/gpio.c')
| -rw-r--r-- | src/avr/gpio.c | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/src/avr/gpio.c b/src/avr/gpio.c index 9f947e7a..9919cdd1 100644 --- a/src/avr/gpio.c +++ b/src/avr/gpio.c @@ -143,7 +143,7 @@ gpio_out_setup(uint8_t pin, uint8_t val) if (! regs) goto fail; uint8_t bit = GPIO2BIT(pin); - uint8_t flag = irq_save(); + irqstatus_t flag = irq_save(); regs->out = val ? (regs->out | bit) : (regs->out & ~bit); regs->mode |= bit; irq_restore(flag); @@ -160,7 +160,7 @@ void gpio_out_toggle(struct gpio_out g) void gpio_out_write(struct gpio_out g, uint8_t val) { - uint8_t flag = irq_save(); + irqstatus_t flag = irq_save(); g.regs->out = val ? (g.regs->out | g.bit) : (g.regs->out & ~g.bit); irq_restore(flag); } @@ -174,7 +174,7 @@ gpio_in_setup(uint8_t pin, int8_t pull_up) if (! regs) goto fail; uint8_t bit = GPIO2BIT(pin); - uint8_t flag = irq_save(); + irqstatus_t flag = irq_save(); regs->out = pull_up > 0 ? (regs->out | bit) : (regs->out & ~bit); regs->mode &= ~bit; irq_restore(flag); @@ -196,7 +196,7 @@ gpio_pwm_write(struct gpio_pwm g, uint8_t val) if (g.size8) { *(volatile uint8_t*)g.reg = val; } else { - uint8_t flag = irq_save(); + irqstatus_t flag = irq_save(); *(volatile uint16_t*)g.reg = val; irq_restore(flag); } @@ -210,7 +210,7 @@ gpio_pwm_setup(uint8_t pin, uint32_t cycle_time, uint8_t val) if (READP(pwm_pins[chan]) != pin) continue; const struct gpio_pwm_info *p = &pwm_regs[chan]; - uint8_t flags = READP(p->flags), cs; + irqstatus_t flags = READP(p->flags), cs; if (flags & GP_AFMT) { switch (cycle_time) { case 0 ... 8*510L - 1: cs = 1; break; @@ -240,7 +240,7 @@ gpio_pwm_setup(uint8_t pin, uint32_t cycle_time, uint8_t val) shutdown("Can not user timer1 for PWM; timer1 is used for timers"); // Setup PWM timer - uint8_t flag = irq_save(); + irqstatus_t flag = irq_save(); uint8_t old_cs = *regb & 0x07; if (old_cs && old_cs != cs) shutdown("PWM already programmed at different speed"); |