1 files changed, 0 insertions, 103 deletions
diff --git a/scripts/install-octopi.sh b/scripts/install-octopi.sh
deleted file mode 100755
index a7fb78c2..00000000
--- a/scripts/install-octopi.sh
+++ /dev/null
@@ -1,103 +0,0 @@
-#!/bin/bash
-# This script installs Klipper on a Raspberry Pi machine running the
-# OctoPi distribution.
-
-PYTHONDIR="${HOME}/klippy-env"
-
-# Step 1: Install system packages
-install_packages()
-{
-    # Packages for python cffi
-    PKGLIST="virtualenv python-dev libffi-dev build-essential"
-    # kconfig requirements
-    PKGLIST="${PKGLIST} libncurses-dev"
-    # hub-ctrl
-    PKGLIST="${PKGLIST} libusb-dev"
-    # AVR chip installation and building
-    PKGLIST="${PKGLIST} avrdude gcc-avr binutils-avr avr-libc"
-    # ARM chip installation and building
-    PKGLIST="${PKGLIST} stm32flash dfu-util libnewlib-arm-none-eabi"
-    PKGLIST="${PKGLIST} gcc-arm-none-eabi binutils-arm-none-eabi libusb-1.0"
-
-    # Update system package info
-    report_status "Running apt-get update..."
-    sudo apt-get update
-
-    # Install desired packages
-    report_status "Installing packages..."
-    sudo apt-get install --yes ${PKGLIST}
-}
-
-# Step 2: Create python virtual environment
-create_virtualenv()
-{
-    report_status "Updating python virtual environment..."
-
-    # Create virtualenv if it doesn't already exist
-    [ ! -d ${PYTHONDIR} ] && virtualenv -p python2 ${PYTHONDIR}
-
-    # Install/update dependencies
-    ${PYTHONDIR}/bin/pip install -r ${SRCDIR}/scripts/klippy-requirements.txt
-}
-
-# Step 3: Install startup script
-install_script()
-{
-    report_status "Installing system start script..."
-    sudo cp "${SRCDIR}/scripts/klipper-start.sh" /etc/init.d/klipper
-    sudo update-rc.d klipper defaults
-}
-
-# Step 4: Install startup script config
-install_config()
-{
-    DEFAULTS_FILE=/etc/default/klipper
-    [ -f $DEFAULTS_FILE ] && return
-
-    report_status "Installing system start configuration..."
-    sudo /bin/sh -c "cat > $DEFAULTS_FILE" <<EOF
-# Configuration for /etc/init.d/klipper
-
-KLIPPY_USER=$USER
-
-KLIPPY_EXEC=${PYTHONDIR}/bin/python
-
-KLIPPY_ARGS="${SRCDIR}/klippy/klippy.py ${HOME}/printer.cfg -l /tmp/klippy.log"
-
-EOF
-}
-
-# Step 5: Start host software
-start_software()
-{
-    report_status "Launching Klipper host software..."
-    sudo /etc/init.d/klipper restart
-}
-
-# Helper functions
-report_status()
-{
-    echo -e "\n\n###### $1"
-}
-
-verify_ready()
-{
-    if [ "$EUID" -eq 0 ]; then
-        echo "This script must not run as root"
-        exit -1
-    fi
-}
-
-# Force script to exit if an error occurs
-set -e
-
-# Find SRCDIR from the pathname of this script
-SRCDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )"/.. && pwd )"
-
-# Run installation steps defined above
-verify_ready
-install_packages
-create_virtualenv
-install_script
-install_config
-start_software