diff options
Diffstat (limited to 'scripts/flash-sdcard.sh')
| -rwxr-xr-x | scripts/flash-sdcard.sh | 36 |
1 files changed, 18 insertions, 18 deletions
diff --git a/scripts/flash-sdcard.sh b/scripts/flash-sdcard.sh index 6a08eab1..2e85fd35 100755 --- a/scripts/flash-sdcard.sh +++ b/scripts/flash-sdcard.sh @@ -5,9 +5,9 @@ # Non-standard installations may need to change this location KLIPPY_ENV="${HOME}/klippy-env/bin/python" SRCDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )"/.. && pwd )" -KLIPPER_BIN="${SRCDIR}/out/klipper.bin" -KLIPPER_BIN_DEFAULT=$KLIPPER_BIN -KLIPPER_DICT_DEFAULT="${SRCDIR}/out/klipper.dict" +KUTTER_BIN="${SRCDIR}/out/kutter.bin" +KUTTER_BIN_DEFAULT=$KUTTER_BIN +KUTTER_DICT_DEFAULT="${SRCDIR}/out/kutter.dict" SPI_FLASH="${SRCDIR}/scripts/spi_flash/spi_flash.py" BAUD_ARG="" CHECK_ARG="" @@ -16,7 +16,7 @@ set -e print_help_message() { - echo "SD Card upload utility for Klipper" + echo "SD Card upload utility for Kutter" echo echo "usage: flash_sdcard.sh [-h] [-l] [-c] [-b <baud>] [-f <firmware>] [-d <dictionary>]" echo " <device> <board>" @@ -30,8 +30,8 @@ print_help_message() echo " -l list available boards" echo " -c run flash check/verify only (skip upload)" echo " -b <baud> serial baud rate (default is 250000)" - echo " -f <firmware> path to klipper.bin" - echo " -d <dictionary> path to klipper.dict for firmware validation" + echo " -f <firmware> path to kutter.bin" + echo " -d <dictionary> path to kutter.dict for firmware validation" } # Parse command line "optional args" @@ -47,8 +47,8 @@ while getopts "hlcb:f:d:" arg; do ;; c) CHECK_ARG="-c";; b) BAUD_ARG="-b ${OPTARG}";; - f) KLIPPER_BIN=$OPTARG;; - d) KLIPPER_DICT=$OPTARG;; + f) KUTTER_BIN=$OPTARG;; + d) KUTTER_DICT=$OPTARG;; esac done @@ -61,8 +61,8 @@ fi DEVICE=${@:$OPTIND:1} BOARD=${@:$OPTIND+1:1} -if [ ! -f $KLIPPER_BIN ]; then - echo "No file found at '${KLIPPER_BIN}'" +if [ ! -f $KUTTER_BIN ]; then + echo "No file found at '${KUTTER_BIN}'" exit -1 fi @@ -71,18 +71,18 @@ if [ ! -e $DEVICE ]; then exit -1 fi -if [ ! $KLIPPER_DICT ] && [ $KLIPPER_BIN == $KLIPPER_BIN_DEFAULT ] ; then - KLIPPER_DICT=$KLIPPER_DICT_DEFAULT +if [ ! $KUTTER_DICT ] && [ $KUTTER_BIN == $KUTTER_BIN_DEFAULT ] ; then + KUTTER_DICT=$KUTTER_DICT_DEFAULT fi -if [ $KLIPPER_DICT ]; then - if [ ! -f $KLIPPER_DICT ]; then - echo "No file found at '${KLIPPER_BIN}'" +if [ $KUTTER_DICT ]; then + if [ ! -f $KUTTER_DICT ]; then + echo "No file found at '${KUTTER_BIN}'" exit -1 fi - KLIPPER_DICT="-d ${KLIPPER_DICT}" + KUTTER_DICT="-d ${KUTTER_DICT}" fi # Run Script -echo "Flashing ${KLIPPER_BIN} to ${DEVICE}" -${KLIPPY_ENV} ${SPI_FLASH} ${CHECK_ARG} ${BAUD_ARG} ${KLIPPER_DICT} ${DEVICE} ${BOARD} ${KLIPPER_BIN} +echo "Flashing ${KUTTER_BIN} to ${DEVICE}" +${KLIPPY_ENV} ${SPI_FLASH} ${CHECK_ARG} ${BAUD_ARG} ${KUTTER_DICT} ${DEVICE} ${BOARD} ${KUTTER_BIN} |