diff options
Diffstat (limited to 'lib/stm32f1/hal/source/stm32f1xx_ll_fsmc.c')
| -rw-r--r-- | lib/stm32f1/hal/source/stm32f1xx_ll_fsmc.c | 985 |
1 files changed, 985 insertions, 0 deletions
diff --git a/lib/stm32f1/hal/source/stm32f1xx_ll_fsmc.c b/lib/stm32f1/hal/source/stm32f1xx_ll_fsmc.c new file mode 100644 index 00000000..57e024bf --- /dev/null +++ b/lib/stm32f1/hal/source/stm32f1xx_ll_fsmc.c @@ -0,0 +1,985 @@ +/**
+ ******************************************************************************
+ * @file stm32f1xx_ll_fsmc.c
+ * @author MCD Application Team
+ * @brief FSMC Low Layer HAL module driver.
+ *
+ * This file provides firmware functions to manage the following
+ * functionalities of the Flexible Memory Controller (FSMC) peripheral memories:
+ * + Initialization/de-initialization functions
+ * + Peripheral Control functions
+ * + Peripheral State functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### FSMC peripheral features #####
+ ==============================================================================
+ [..] The Flexible memory controller (FSMC) includes following memory controllers:
+ (+) The NOR/PSRAM memory controller
+ (+) The NAND/PC Card memory controller
+
+ [..] The FSMC functional block makes the interface with synchronous and asynchronous static
+ memories and 16-bit PC memory cards. Its main purposes are:
+ (+) to translate AHB transactions into the appropriate external device protocol
+ (+) to meet the access time requirements of the external memory devices
+
+ [..] All external memories share the addresses, data and control signals with the controller.
+ Each external device is accessed by means of a unique Chip Select. The FSMC performs
+ only one access at a time to an external device.
+ The main features of the FSMC controller are the following:
+ (+) Interface with static-memory mapped devices including:
+ (++) Static random access memory (SRAM)
+ (++) Read-only memory (ROM)
+ (++) NOR Flash memory/OneNAND Flash memory
+ (++) PSRAM (4 memory banks)
+ (++) 16-bit PC Card compatible devices
+ (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of
+ data
+ (+) Independent Chip Select control for each memory bank
+ (+) Independent configuration for each memory bank
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© Copyright (c) 2016 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f1xx_hal.h"
+
+/** @addtogroup STM32F1xx_HAL_Driver
+ * @{
+ */
+#if (((defined HAL_NOR_MODULE_ENABLED || defined HAL_SRAM_MODULE_ENABLED)) || defined HAL_NAND_MODULE_ENABLED || defined HAL_PCCARD_MODULE_ENABLED )
+
+/** @defgroup FSMC_LL FSMC Low Layer
+ * @brief FSMC driver modules
+ * @{
+ */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+
+/** @defgroup FSMC_LL_Private_Constants FSMC Low Layer Private Constants
+ * @{
+ */
+
+/* ----------------------- FSMC registers bit mask --------------------------- */
+
+#if defined FSMC_BANK1
+/* --- BCR Register ---*/
+/* BCR register clear mask */
+
+/* --- BTR Register ---*/
+/* BTR register clear mask */
+#define BTR_CLEAR_MASK ((uint32_t)(FSMC_BTRx_ADDSET | FSMC_BTRx_ADDHLD |\
+ FSMC_BTRx_DATAST | FSMC_BTRx_BUSTURN |\
+ FSMC_BTRx_CLKDIV | FSMC_BTRx_DATLAT |\
+ FSMC_BTRx_ACCMOD))
+
+/* --- BWTR Register ---*/
+/* BWTR register clear mask */
+#if defined(FSMC_BWTRx_BUSTURN)
+#define BWTR_CLEAR_MASK ((uint32_t)(FSMC_BWTRx_ADDSET | FSMC_BWTRx_ADDHLD |\
+ FSMC_BWTRx_DATAST | FSMC_BWTRx_BUSTURN |\
+ FSMC_BWTRx_ACCMOD))
+#else
+#define BWTR_CLEAR_MASK ((uint32_t)(FSMC_BWTRx_ADDSET | FSMC_BWTRx_ADDHLD |\
+ FSMC_BWTRx_DATAST | FSMC_BWTRx_ACCMOD))
+#endif /* FSMC_BWTRx_BUSTURN */
+#endif /* FSMC_BANK1 */
+#if defined(FSMC_BANK3)
+
+/* --- PCR Register ---*/
+/* PCR register clear mask */
+#define PCR_CLEAR_MASK ((uint32_t)(FSMC_PCRx_PWAITEN | FSMC_PCRx_PBKEN | \
+ FSMC_PCRx_PTYP | FSMC_PCRx_PWID | \
+ FSMC_PCRx_ECCEN | FSMC_PCRx_TCLR | \
+ FSMC_PCRx_TAR | FSMC_PCRx_ECCPS))
+/* --- PMEM Register ---*/
+/* PMEM register clear mask */
+#define PMEM_CLEAR_MASK ((uint32_t)(FSMC_PMEMx_MEMSETx | FSMC_PMEMx_MEMWAITx |\
+ FSMC_PMEMx_MEMHOLDx | FSMC_PMEMx_MEMHIZx))
+
+/* --- PATT Register ---*/
+/* PATT register clear mask */
+#define PATT_CLEAR_MASK ((uint32_t)(FSMC_PATTx_ATTSETx | FSMC_PATTx_ATTWAITx |\
+ FSMC_PATTx_ATTHOLDx | FSMC_PATTx_ATTHIZx))
+
+#endif /* FSMC_BANK3 */
+#if defined(FSMC_BANK4)
+/* --- PCR Register ---*/
+/* PCR register clear mask */
+#define PCR4_CLEAR_MASK ((uint32_t)(FSMC_PCR4_PWAITEN | FSMC_PCR4_PBKEN | \
+ FSMC_PCR4_PTYP | FSMC_PCR4_PWID | \
+ FSMC_PCR4_ECCEN | FSMC_PCR4_TCLR | \
+ FSMC_PCR4_TAR | FSMC_PCR4_ECCPS))
+/* --- PMEM Register ---*/
+/* PMEM register clear mask */
+#define PMEM4_CLEAR_MASK ((uint32_t)(FSMC_PMEM4_MEMSET4 | FSMC_PMEM4_MEMWAIT4 |\
+ FSMC_PMEM4_MEMHOLD4 | FSMC_PMEM4_MEMHIZ4))
+
+/* --- PATT Register ---*/
+/* PATT register clear mask */
+#define PATT4_CLEAR_MASK ((uint32_t)(FSMC_PATT4_ATTSET4 | FSMC_PATT4_ATTWAIT4 |\
+ FSMC_PATT4_ATTHOLD4 | FSMC_PATT4_ATTHIZ4))
+
+/* --- PIO4 Register ---*/
+/* PIO4 register clear mask */
+#define PIO4_CLEAR_MASK ((uint32_t)(FSMC_PIO4_IOSET4 | FSMC_PIO4_IOWAIT4 | \
+ FSMC_PIO4_IOHOLD4 | FSMC_PIO4_IOHIZ4))
+
+#endif /* FSMC_BANK4 */
+
+/**
+ * @}
+ */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup FSMC_LL_Exported_Functions FSMC Low Layer Exported Functions
+ * @{
+ */
+
+#if defined FSMC_BANK1
+
+/** @defgroup FSMC_LL_Exported_Functions_NORSRAM FSMC Low Layer NOR SRAM Exported Functions
+ * @brief NORSRAM Controller functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use NORSRAM device driver #####
+ ==============================================================================
+
+ [..]
+ This driver contains a set of APIs to interface with the FSMC NORSRAM banks in order
+ to run the NORSRAM external devices.
+
+ (+) FSMC NORSRAM bank reset using the function FSMC_NORSRAM_DeInit()
+ (+) FSMC NORSRAM bank control configuration using the function FSMC_NORSRAM_Init()
+ (+) FSMC NORSRAM bank timing configuration using the function FSMC_NORSRAM_Timing_Init()
+ (+) FSMC NORSRAM bank extended timing configuration using the function
+ FSMC_NORSRAM_Extended_Timing_Init()
+ (+) FSMC NORSRAM bank enable/disable write operation using the functions
+ FSMC_NORSRAM_WriteOperation_Enable()/FSMC_NORSRAM_WriteOperation_Disable()
+
+@endverbatim
+ * @{
+ */
+
+/** @defgroup FSMC_LL_NORSRAM_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the FSMC NORSRAM interface
+ (+) De-initialize the FSMC NORSRAM interface
+ (+) Configure the FSMC clock and associated GPIOs
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initialize the FSMC_NORSRAM device according to the specified
+ * control parameters in the FSMC_NORSRAM_InitTypeDef
+ * @param Device Pointer to NORSRAM device instance
+ * @param Init Pointer to NORSRAM Initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef *Init)
+{
+ uint32_t flashaccess;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FSMC_NORSRAM_BANK(Init->NSBank));
+ assert_param(IS_FSMC_MUX(Init->DataAddressMux));
+ assert_param(IS_FSMC_MEMORY(Init->MemoryType));
+ assert_param(IS_FSMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth));
+ assert_param(IS_FSMC_BURSTMODE(Init->BurstAccessMode));
+ assert_param(IS_FSMC_WAIT_POLARITY(Init->WaitSignalPolarity));
+ assert_param(IS_FSMC_WRAP_MODE(Init->WrapMode));
+ assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive));
+ assert_param(IS_FSMC_WRITE_OPERATION(Init->WriteOperation));
+ assert_param(IS_FSMC_WAITE_SIGNAL(Init->WaitSignal));
+ assert_param(IS_FSMC_EXTENDED_MODE(Init->ExtendedMode));
+ assert_param(IS_FSMC_ASYNWAIT(Init->AsynchronousWait));
+ assert_param(IS_FSMC_WRITE_BURST(Init->WriteBurst));
+ assert_param(IS_FSMC_PAGESIZE(Init->PageSize));
+
+ /* Disable NORSRAM Device */
+ __FSMC_NORSRAM_DISABLE(Device, Init->NSBank);
+
+ /* Set NORSRAM device control parameters */
+ if (Init->MemoryType == FSMC_MEMORY_TYPE_NOR)
+ {
+ flashaccess = FSMC_NORSRAM_FLASH_ACCESS_ENABLE;
+ }
+ else
+ {
+ flashaccess = FSMC_NORSRAM_FLASH_ACCESS_DISABLE;
+ }
+
+ MODIFY_REG(Device->BTCR[Init->NSBank],
+ (FSMC_BCRx_MBKEN |
+ FSMC_BCRx_MUXEN |
+ FSMC_BCRx_MTYP |
+ FSMC_BCRx_MWID |
+ FSMC_BCRx_FACCEN |
+ FSMC_BCRx_BURSTEN |
+ FSMC_BCRx_WAITPOL |
+ FSMC_BCRx_WRAPMOD |
+ FSMC_BCRx_WAITCFG |
+ FSMC_BCRx_WREN |
+ FSMC_BCRx_WAITEN |
+ FSMC_BCRx_EXTMOD |
+ FSMC_BCRx_ASYNCWAIT |
+ FSMC_BCRx_CBURSTRW |
+ 0x00070000U), /* CPSIZE to be defined in CMSIS file */
+ (flashaccess |
+ Init->DataAddressMux |
+ Init->MemoryType |
+ Init->MemoryDataWidth |
+ Init->BurstAccessMode |
+ Init->WaitSignalPolarity |
+ Init->WrapMode |
+ Init->WaitSignalActive |
+ Init->WriteOperation |
+ Init->WaitSignal |
+ Init->ExtendedMode |
+ Init->AsynchronousWait |
+ Init->WriteBurst |
+ Init->PageSize));
+
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitialize the FSMC_NORSRAM peripheral
+ * @param Device Pointer to NORSRAM device instance
+ * @param ExDevice Pointer to NORSRAM extended mode device instance
+ * @param Bank NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(ExDevice));
+ assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+ /* Disable the FSMC_NORSRAM device */
+ __FSMC_NORSRAM_DISABLE(Device, Bank);
+
+ /* De-initialize the FSMC_NORSRAM device */
+ /* FSMC_NORSRAM_BANK1 */
+ if (Bank == FSMC_NORSRAM_BANK1)
+ {
+ Device->BTCR[Bank] = 0x000030DBU;
+ }
+ /* FSMC_NORSRAM_BANK2, FSMC_NORSRAM_BANK3 or FSMC_NORSRAM_BANK4 */
+ else
+ {
+ Device->BTCR[Bank] = 0x000030D2U;
+ }
+
+ Device->BTCR[Bank + 1U] = 0x0FFFFFFFU;
+ ExDevice->BWTR[Bank] = 0x0FFFFFFFU;
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the FSMC_NORSRAM Timing according to the specified
+ * parameters in the FSMC_NORSRAM_TimingTypeDef
+ * @param Device Pointer to NORSRAM device instance
+ * @param Timing Pointer to NORSRAM Timing structure
+ * @param Bank NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank)
+{
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
+ assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
+ assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime));
+ assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
+ assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision));
+ assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency));
+ assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode));
+ assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+ /* Set FSMC_NORSRAM device timing parameters */
+ MODIFY_REG(Device->BTCR[Bank + 1U], BTR_CLEAR_MASK, (Timing->AddressSetupTime |
+ ((Timing->AddressHoldTime) << FSMC_BTRx_ADDHLD_Pos) |
+ ((Timing->DataSetupTime) << FSMC_BTRx_DATAST_Pos) |
+ ((Timing->BusTurnAroundDuration) << FSMC_BTRx_BUSTURN_Pos) |
+ (((Timing->CLKDivision) - 1U) << FSMC_BTRx_CLKDIV_Pos) |
+ (((Timing->DataLatency) - 2U) << FSMC_BTRx_DATLAT_Pos) |
+ (Timing->AccessMode)));
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initialize the FSMC_NORSRAM Extended mode Timing according to the specified
+ * parameters in the FSMC_NORSRAM_TimingTypeDef
+ * @param Device Pointer to NORSRAM device instance
+ * @param Timing Pointer to NORSRAM Timing structure
+ * @param Bank NORSRAM bank number
+ * @param ExtendedMode FSMC Extended Mode
+ * This parameter can be one of the following values:
+ * @arg FSMC_EXTENDED_MODE_DISABLE
+ * @arg FSMC_EXTENDED_MODE_ENABLE
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_EXTENDED_MODE(ExtendedMode));
+
+ /* Set NORSRAM device timing register for write configuration, if extended mode is used */
+ if (ExtendedMode == FSMC_EXTENDED_MODE_ENABLE)
+ {
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(Device));
+ assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
+ assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
+ assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime));
+#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG)
+ assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
+#else
+ assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision));
+ assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency));
+#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG */
+ assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode));
+ assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+ /* Set NORSRAM device timing register for write configuration, if extended mode is used */
+#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG)
+ MODIFY_REG(Device->BWTR[Bank], BWTR_CLEAR_MASK, (Timing->AddressSetupTime |
+ ((Timing->AddressHoldTime) << FSMC_BWTRx_ADDHLD_Pos) |
+ ((Timing->DataSetupTime) << FSMC_BWTRx_DATAST_Pos) |
+ Timing->AccessMode |
+ ((Timing->BusTurnAroundDuration) << FSMC_BWTRx_BUSTURN_Pos)));
+#else
+ MODIFY_REG(Device->BWTR[Bank], BWTR_CLEAR_MASK, (Timing->AddressSetupTime |
+ ((Timing->AddressHoldTime) << FSMC_BWTRx_ADDHLD_Pos) |
+ ((Timing->DataSetupTime) << FSMC_BWTRx_DATAST_Pos) |
+ Timing->AccessMode |
+ (((Timing->CLKDivision) - 1U) << FSMC_BTRx_CLKDIV_Pos) |
+ (((Timing->DataLatency) - 2U) << FSMC_BWTRx_DATLAT_Pos)));
+#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG */
+ }
+ else
+ {
+ Device->BWTR[Bank] = 0x0FFFFFFFU;
+ }
+
+ return HAL_OK;
+}
+/**
+ * @}
+ */
+
+/** @addtogroup FSMC_LL_NORSRAM_Private_Functions_Group2
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### FSMC_NORSRAM Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the FSMC NORSRAM interface.
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Enables dynamically FSMC_NORSRAM write operation.
+ * @param Device Pointer to NORSRAM device instance
+ * @param Bank NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+ /* Enable write operation */
+ SET_BIT(Device->BTCR[Bank], FSMC_WRITE_OPERATION_ENABLE);
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FSMC_NORSRAM write operation.
+ * @param Device Pointer to NORSRAM device instance
+ * @param Bank NORSRAM bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
+ assert_param(IS_FSMC_NORSRAM_BANK(Bank));
+
+ /* Disable write operation */
+ CLEAR_BIT(Device->BTCR[Bank], FSMC_WRITE_OPERATION_ENABLE);
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* FSMC_BANK1 */
+
+#if defined(FSMC_BANK3)
+
+/** @defgroup FSMC_LL_Exported_Functions_NAND FSMC Low Layer NAND Exported Functions
+ * @brief NAND Controller functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use NAND device driver #####
+ ==============================================================================
+ [..]
+ This driver contains a set of APIs to interface with the FSMC NAND banks in order
+ to run the NAND external devices.
+
+ (+) FSMC NAND bank reset using the function FSMC_NAND_DeInit()
+ (+) FSMC NAND bank control configuration using the function FSMC_NAND_Init()
+ (+) FSMC NAND bank common space timing configuration using the function
+ FSMC_NAND_CommonSpace_Timing_Init()
+ (+) FSMC NAND bank attribute space timing configuration using the function
+ FSMC_NAND_AttributeSpace_Timing_Init()
+ (+) FSMC NAND bank enable/disable ECC correction feature using the functions
+ FSMC_NAND_ECC_Enable()/FSMC_NAND_ECC_Disable()
+ (+) FSMC NAND bank get ECC correction code using the function FSMC_NAND_GetECC()
+
+@endverbatim
+ * @{
+ */
+
+/** @defgroup FSMC_LL_NAND_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the FSMC NAND interface
+ (+) De-initialize the FSMC NAND interface
+ (+) Configure the FSMC clock and associated GPIOs
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the FSMC_NAND device according to the specified
+ * control parameters in the FSMC_NAND_HandleTypeDef
+ * @param Device Pointer to NAND device instance
+ * @param Init Pointer to NAND Initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_NAND_DEVICE(Device));
+ assert_param(IS_FSMC_NAND_BANK(Init->NandBank));
+ assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature));
+ assert_param(IS_FSMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth));
+ assert_param(IS_FSMC_ECC_STATE(Init->EccComputation));
+ assert_param(IS_FSMC_ECCPAGE_SIZE(Init->ECCPageSize));
+ assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime));
+ assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime));
+
+ /* Set NAND device control parameters */
+ if (Init->NandBank == FSMC_NAND_BANK2)
+ {
+ /* NAND bank 2 registers configuration */
+ MODIFY_REG(Device->PCR2, PCR_CLEAR_MASK, (Init->Waitfeature |
+ FSMC_PCR_MEMORY_TYPE_NAND |
+ Init->MemoryDataWidth |
+ Init->EccComputation |
+ Init->ECCPageSize |
+ ((Init->TCLRSetupTime) << FSMC_PCRx_TCLR_Pos) |
+ ((Init->TARSetupTime) << FSMC_PCRx_TAR_Pos)));
+ }
+ else
+ {
+ /* NAND bank 3 registers configuration */
+ MODIFY_REG(Device->PCR3, PCR_CLEAR_MASK, (Init->Waitfeature |
+ FSMC_PCR_MEMORY_TYPE_NAND |
+ Init->MemoryDataWidth |
+ Init->EccComputation |
+ Init->ECCPageSize |
+ ((Init->TCLRSetupTime) << FSMC_PCRx_TCLR_Pos) |
+ ((Init->TARSetupTime) << FSMC_PCRx_TAR_Pos)));
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FSMC_NAND Common space Timing according to the specified
+ * parameters in the FSMC_NAND_PCC_TimingTypeDef
+ * @param Device Pointer to NAND device instance
+ * @param Timing Pointer to NAND timing structure
+ * @param Bank NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_NAND_DEVICE(Device));
+ assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+ assert_param(IS_FSMC_NAND_BANK(Bank));
+
+ /* Set FSMC_NAND device timing parameters */
+ if (Bank == FSMC_NAND_BANK2)
+ {
+ /* NAND bank 2 registers configuration */
+ MODIFY_REG(Device->PMEM2, PMEM_CLEAR_MASK, (Timing->SetupTime |
+ ((Timing->WaitSetupTime) << FSMC_PMEMx_MEMWAITx_Pos) |
+ ((Timing->HoldSetupTime) << FSMC_PMEMx_MEMHOLDx_Pos) |
+ ((Timing->HiZSetupTime) << FSMC_PMEMx_MEMHIZx_Pos)));
+ }
+ else
+ {
+ /* NAND bank 3 registers configuration */
+ MODIFY_REG(Device->PMEM3, PMEM_CLEAR_MASK, (Timing->SetupTime |
+ ((Timing->WaitSetupTime) << FSMC_PMEMx_MEMWAITx_Pos) |
+ ((Timing->HoldSetupTime) << FSMC_PMEMx_MEMHOLDx_Pos) |
+ ((Timing->HiZSetupTime) << FSMC_PMEMx_MEMHIZx_Pos)));
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FSMC_NAND Attribute space Timing according to the specified
+ * parameters in the FSMC_NAND_PCC_TimingTypeDef
+ * @param Device Pointer to NAND device instance
+ * @param Timing Pointer to NAND timing structure
+ * @param Bank NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_NAND_DEVICE(Device));
+ assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+ assert_param(IS_FSMC_NAND_BANK(Bank));
+
+ /* Set FSMC_NAND device timing parameters */
+ if (Bank == FSMC_NAND_BANK2)
+ {
+ /* NAND bank 2 registers configuration */
+ MODIFY_REG(Device->PATT2, PATT_CLEAR_MASK, (Timing->SetupTime |
+ ((Timing->WaitSetupTime) << FSMC_PATTx_ATTWAITx_Pos) |
+ ((Timing->HoldSetupTime) << FSMC_PATTx_ATTHOLDx_Pos) |
+ ((Timing->HiZSetupTime) << FSMC_PATTx_ATTHIZx_Pos)));
+ }
+ else
+ {
+ /* NAND bank 3 registers configuration */
+ MODIFY_REG(Device->PATT3, PATT_CLEAR_MASK, (Timing->SetupTime |
+ ((Timing->WaitSetupTime) << FSMC_PATTx_ATTWAITx_Pos) |
+ ((Timing->HoldSetupTime) << FSMC_PATTx_ATTHOLDx_Pos) |
+ ((Timing->HiZSetupTime) << FSMC_PATTx_ATTHIZx_Pos)));
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the FSMC_NAND device
+ * @param Device Pointer to NAND device instance
+ * @param Bank NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_NAND_DEVICE(Device));
+ assert_param(IS_FSMC_NAND_BANK(Bank));
+
+ /* Disable the NAND Bank */
+ __FSMC_NAND_DISABLE(Device, Bank);
+
+ /* De-initialize the NAND Bank */
+ if (Bank == FSMC_NAND_BANK2)
+ {
+ /* Set the FSMC_NAND_BANK2 registers to their reset values */
+ WRITE_REG(Device->PCR2, 0x00000018U);
+ WRITE_REG(Device->SR2, 0x00000040U);
+ WRITE_REG(Device->PMEM2, 0xFCFCFCFCU);
+ WRITE_REG(Device->PATT2, 0xFCFCFCFCU);
+ }
+ /* FSMC_Bank3_NAND */
+ else
+ {
+ /* Set the FSMC_NAND_BANK3 registers to their reset values */
+ WRITE_REG(Device->PCR3, 0x00000018U);
+ WRITE_REG(Device->SR3, 0x00000040U);
+ WRITE_REG(Device->PMEM3, 0xFCFCFCFCU);
+ WRITE_REG(Device->PATT3, 0xFCFCFCFCU);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_FSMC_NAND_Group2 Peripheral Control functions
+ * @brief management functions
+ *
+@verbatim
+ ==============================================================================
+ ##### FSMC_NAND Control functions #####
+ ==============================================================================
+ [..]
+ This subsection provides a set of functions allowing to control dynamically
+ the FSMC NAND interface.
+
+@endverbatim
+ * @{
+ */
+
+
+/**
+ * @brief Enables dynamically FSMC_NAND ECC feature.
+ * @param Device Pointer to NAND device instance
+ * @param Bank NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_NAND_DEVICE(Device));
+ assert_param(IS_FSMC_NAND_BANK(Bank));
+
+ /* Enable ECC feature */
+ if (Bank == FSMC_NAND_BANK2)
+ {
+ SET_BIT(Device->PCR2, FSMC_PCRx_ECCEN);
+ }
+ else
+ {
+ SET_BIT(Device->PCR3, FSMC_PCRx_ECCEN);
+ }
+
+ return HAL_OK;
+}
+
+
+/**
+ * @brief Disables dynamically FSMC_NAND ECC feature.
+ * @param Device Pointer to NAND device instance
+ * @param Bank NAND bank number
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_NAND_DEVICE(Device));
+ assert_param(IS_FSMC_NAND_BANK(Bank));
+
+ /* Disable ECC feature */
+ if (Bank == FSMC_NAND_BANK2)
+ {
+ CLEAR_BIT(Device->PCR2, FSMC_PCRx_ECCEN);
+ }
+ else
+ {
+ CLEAR_BIT(Device->PCR3, FSMC_PCRx_ECCEN);
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Disables dynamically FSMC_NAND ECC feature.
+ * @param Device Pointer to NAND device instance
+ * @param ECCval Pointer to ECC value
+ * @param Bank NAND bank number
+ * @param Timeout Timeout wait value
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout)
+{
+ uint32_t tickstart;
+
+ /* Check the parameters */
+ assert_param(IS_FSMC_NAND_DEVICE(Device));
+ assert_param(IS_FSMC_NAND_BANK(Bank));
+
+ /* Get tick */
+ tickstart = HAL_GetTick();
+
+ /* Wait until FIFO is empty */
+ while (__FSMC_NAND_GET_FLAG(Device, Bank, FSMC_FLAG_FEMPT) == RESET)
+ {
+ /* Check for the Timeout */
+ if (Timeout != HAL_MAX_DELAY)
+ {
+ if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
+ {
+ return HAL_TIMEOUT;
+ }
+ }
+ }
+
+ if (Bank == FSMC_NAND_BANK2)
+ {
+ /* Get the ECCR2 register value */
+ *ECCval = (uint32_t)Device->ECCR2;
+ }
+ else
+ {
+ /* Get the ECCR3 register value */
+ *ECCval = (uint32_t)Device->ECCR3;
+ }
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+#endif /* FSMC_BANK3 */
+
+#if defined(FSMC_BANK4)
+
+/** @addtogroup FSMC_LL_PCCARD
+ * @brief PCCARD Controller functions
+ *
+ @verbatim
+ ==============================================================================
+ ##### How to use PCCARD device driver #####
+ ==============================================================================
+ [..]
+ This driver contains a set of APIs to interface with the FSMC PCCARD bank in order
+ to run the PCCARD/compact flash external devices.
+
+ (+) FSMC PCCARD bank reset using the function FSMC_PCCARD_DeInit()
+ (+) FSMC PCCARD bank control configuration using the function FSMC_PCCARD_Init()
+ (+) FSMC PCCARD bank common space timing configuration using the function
+ FSMC_PCCARD_CommonSpace_Timing_Init()
+ (+) FSMC PCCARD bank attribute space timing configuration using the function
+ FSMC_PCCARD_AttributeSpace_Timing_Init()
+ (+) FSMC PCCARD bank IO space timing configuration using the function
+ FSMC_PCCARD_IOSpace_Timing_Init()
+@endverbatim
+ * @{
+ */
+
+/** @addtogroup FSMC_LL_PCCARD_Private_Functions_Group1
+ * @brief Initialization and Configuration functions
+ *
+@verbatim
+ ==============================================================================
+ ##### Initialization and de_initialization functions #####
+ ==============================================================================
+ [..]
+ This section provides functions allowing to:
+ (+) Initialize and configure the FSMC PCCARD interface
+ (+) De-initialize the FSMC PCCARD interface
+ (+) Configure the FSMC clock and associated GPIOs
+
+@endverbatim
+ * @{
+ */
+
+/**
+ * @brief Initializes the FSMC_PCCARD device according to the specified
+ * control parameters in the FSMC_PCCARD_HandleTypeDef
+ * @param Device Pointer to PCCARD device instance
+ * @param Init Pointer to PCCARD Initialization structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_PCCARD_DEVICE(Device));
+ assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature));
+ assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime));
+ assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime));
+
+ /* Set FSMC_PCCARD device control parameters */
+ MODIFY_REG(Device->PCR4,
+ (FSMC_PCRx_PTYP |
+ FSMC_PCRx_PWAITEN |
+ FSMC_PCRx_PWID |
+ FSMC_PCRx_TCLR |
+ FSMC_PCRx_TAR),
+ (FSMC_PCR_MEMORY_TYPE_PCCARD |
+ Init->Waitfeature |
+ FSMC_NAND_PCC_MEM_BUS_WIDTH_16 |
+ (Init->TCLRSetupTime << FSMC_PCRx_TCLR_Pos) |
+ (Init->TARSetupTime << FSMC_PCRx_TAR_Pos)));
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FSMC_PCCARD Common space Timing according to the specified
+ * parameters in the FSMC_NAND_PCC_TimingTypeDef
+ * @param Device Pointer to PCCARD device instance
+ * @param Timing Pointer to PCCARD timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_PCCARD_DEVICE(Device));
+ assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+ /* Set PCCARD timing parameters */
+ MODIFY_REG(Device->PMEM4, PMEM_CLEAR_MASK,
+ (Timing->SetupTime |
+ ((Timing->WaitSetupTime) << FSMC_PMEMx_MEMWAITx_Pos) |
+ ((Timing->HoldSetupTime) << FSMC_PMEMx_MEMHOLDx_Pos) |
+ ((Timing->HiZSetupTime) << FSMC_PMEMx_MEMHIZx_Pos)));
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FSMC_PCCARD Attribute space Timing according to the specified
+ * parameters in the FSMC_NAND_PCC_TimingTypeDef
+ * @param Device Pointer to PCCARD device instance
+ * @param Timing Pointer to PCCARD timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_PCCARD_DEVICE(Device));
+ assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+ /* Set PCCARD timing parameters */
+ MODIFY_REG(Device->PATT4, PATT_CLEAR_MASK,
+ (Timing->SetupTime |
+ ((Timing->WaitSetupTime) << FSMC_PATTx_ATTWAITx_Pos) |
+ ((Timing->HoldSetupTime) << FSMC_PATTx_ATTHOLDx_Pos) |
+ ((Timing->HiZSetupTime) << FSMC_PATTx_ATTHIZx_Pos)));
+
+ return HAL_OK;
+}
+
+/**
+ * @brief Initializes the FSMC_PCCARD IO space Timing according to the specified
+ * parameters in the FSMC_NAND_PCC_TimingTypeDef
+ * @param Device Pointer to PCCARD device instance
+ * @param Timing Pointer to PCCARD timing structure
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_PCCARD_DEVICE(Device));
+ assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
+ assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
+ assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
+ assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
+
+ /* Set FSMC_PCCARD device timing parameters */
+ MODIFY_REG(Device->PIO4, PIO4_CLEAR_MASK,
+ (Timing->SetupTime |
+ (Timing->WaitSetupTime << FSMC_PIO4_IOWAIT4_Pos) |
+ (Timing->HoldSetupTime << FSMC_PIO4_IOHOLD4_Pos) |
+ (Timing->HiZSetupTime << FSMC_PIO4_IOHIZ4_Pos)));
+
+ return HAL_OK;
+}
+
+/**
+ * @brief DeInitializes the FSMC_PCCARD device
+ * @param Device Pointer to PCCARD device instance
+ * @retval HAL status
+ */
+HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device)
+{
+ /* Check the parameters */
+ assert_param(IS_FSMC_PCCARD_DEVICE(Device));
+
+ /* Disable the FSMC_PCCARD device */
+ __FSMC_PCCARD_DISABLE(Device);
+
+ /* De-initialize the FSMC_PCCARD device */
+ Device->PCR4 = 0x00000018U;
+ Device->SR4 = 0x00000040U;
+ Device->PMEM4 = 0xFCFCFCFCU;
+ Device->PATT4 = 0xFCFCFCFCU;
+ Device->PIO4 = 0xFCFCFCFCU;
+
+ return HAL_OK;
+}
+
+/**
+ * @}
+ */
+#endif /* FSMC_BANK4 */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* HAL_NOR_MODULE_ENABLED */
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|