diff options
Diffstat (limited to 'lib/stm32f1/hal/include/stm32f1xx_hal_cec.h')
| -rw-r--r-- | lib/stm32f1/hal/include/stm32f1xx_hal_cec.h | 552 |
1 files changed, 0 insertions, 552 deletions
diff --git a/lib/stm32f1/hal/include/stm32f1xx_hal_cec.h b/lib/stm32f1/hal/include/stm32f1xx_hal_cec.h deleted file mode 100644 index 2023dcd8..00000000 --- a/lib/stm32f1/hal/include/stm32f1xx_hal_cec.h +++ /dev/null @@ -1,552 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32f1xx_hal_cec.h
- * @author MCD Application Team
- * @brief Header file of CEC HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© Copyright (c) 2016 STMicroelectronics.
- * All rights reserved.</center></h2>
- *
- * This software component is licensed by ST under BSD 3-Clause license,
- * the "License"; You may not use this file except in compliance with the
- * License. You may obtain a copy of the License at:
- * opensource.org/licenses/BSD-3-Clause
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_CEC_H
-#define __STM32F1xx_HAL_CEC_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-#if defined (CEC)
-
-/** @addtogroup STM32F1xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup CEC
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup CEC_Exported_Types CEC Exported Types
- * @{
- */
-/**
- * @brief CEC Init Structure definition
- */
-typedef struct
-{
- uint32_t TimingErrorFree; /*!< Configures the CEC Bit Timing Error Mode.
- This parameter can be a value of @ref CEC_BitTimingErrorMode */
- uint32_t PeriodErrorFree; /*!< Configures the CEC Bit Period Error Mode.
- This parameter can be a value of @ref CEC_BitPeriodErrorMode */
- uint16_t OwnAddress; /*!< Own addresses configuration
- This parameter can be a value of @ref CEC_OWN_ADDRESS */
- uint8_t *RxBuffer; /*!< CEC Rx buffer pointeur */
-}CEC_InitTypeDef;
-
-/**
- * @brief HAL CEC State structures definition
- * @note HAL CEC State value is a combination of 2 different substates: gState and RxState.
- * - gState contains CEC state information related to global Handle management
- * and also information related to Tx operations.
- * gState value coding follow below described bitmap :
- * b7 (not used)
- * x : Should be set to 0
- * b6 Error information
- * 0 : No Error
- * 1 : Error
- * b5 IP initilisation status
- * 0 : Reset (IP not initialized)
- * 1 : Init done (IP initialized. HAL CEC Init function already called)
- * b4-b3 (not used)
- * xx : Should be set to 00
- * b2 Intrinsic process state
- * 0 : Ready
- * 1 : Busy (IP busy with some configuration or internal operations)
- * b1 (not used)
- * x : Should be set to 0
- * b0 Tx state
- * 0 : Ready (no Tx operation ongoing)
- * 1 : Busy (Tx operation ongoing)
- * - RxState contains information related to Rx operations.
- * RxState value coding follow below described bitmap :
- * b7-b6 (not used)
- * xx : Should be set to 00
- * b5 IP initilisation status
- * 0 : Reset (IP not initialized)
- * 1 : Init done (IP initialized)
- * b4-b2 (not used)
- * xxx : Should be set to 000
- * b1 Rx state
- * 0 : Ready (no Rx operation ongoing)
- * 1 : Busy (Rx operation ongoing)
- * b0 (not used)
- * x : Should be set to 0.
- */
-typedef enum
-{
- HAL_CEC_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized
- Value is allowed for gState and RxState */
- HAL_CEC_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
- Value is allowed for gState and RxState */
- HAL_CEC_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
- Value is allowed for gState only */
- HAL_CEC_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
- Value is allowed for RxState only */
- HAL_CEC_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
- Value is allowed for gState only */
- HAL_CEC_STATE_BUSY_RX_TX = 0x23U, /*!< an internal process is ongoing
- Value is allowed for gState only */
- HAL_CEC_STATE_ERROR = 0x60U /*!< Error Value is allowed for gState only */
-}HAL_CEC_StateTypeDef;
-
-/**
- * @brief CEC handle Structure definition
- */
-typedef struct __CEC_HandleTypeDef
-{
- CEC_TypeDef *Instance; /*!< CEC registers base address */
-
- CEC_InitTypeDef Init; /*!< CEC communication parameters */
-
- uint8_t *pTxBuffPtr; /*!< Pointer to CEC Tx transfer Buffer */
-
- uint16_t TxXferCount; /*!< CEC Tx Transfer Counter */
-
- uint16_t RxXferSize; /*!< CEC Rx Transfer size, 0: header received only */
-
- HAL_LockTypeDef Lock; /*!< Locking object */
-
- HAL_CEC_StateTypeDef gState; /*!< CEC state information related to global Handle management
- and also related to Tx operations.
- This parameter can be a value of @ref HAL_CEC_StateTypeDef */
-
- HAL_CEC_StateTypeDef RxState; /*!< CEC state information related to Rx operations.
- This parameter can be a value of @ref HAL_CEC_StateTypeDef */
-
- uint32_t ErrorCode; /*!< For errors handling purposes, copy of ISR register
- in case error is reported */
-
-#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
- void (* TxCpltCallback) ( struct __CEC_HandleTypeDef * hcec); /*!< CEC Tx Transfer completed callback */
- void (* RxCpltCallback) ( struct __CEC_HandleTypeDef * hcec, uint32_t RxFrameSize); /*!< CEC Rx Transfer completed callback */
- void (* ErrorCallback) ( struct __CEC_HandleTypeDef * hcec); /*!< CEC error callback */
-
- void (* MspInitCallback) ( struct __CEC_HandleTypeDef * hcec); /*!< CEC Msp Init callback */
- void (* MspDeInitCallback) ( struct __CEC_HandleTypeDef * hcec); /*!< CEC Msp DeInit callback */
-
-#endif /* (USE_HAL_CEC_REGISTER_CALLBACKS) */
-}CEC_HandleTypeDef;
-
-#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
-/**
- * @brief HAL CEC Callback ID enumeration definition
- */
-typedef enum
-{
- HAL_CEC_TX_CPLT_CB_ID = 0x00U, /*!< CEC Tx Transfer completed callback ID */
- HAL_CEC_RX_CPLT_CB_ID = 0x01U, /*!< CEC Rx Transfer completed callback ID */
- HAL_CEC_ERROR_CB_ID = 0x02U, /*!< CEC error callback ID */
- HAL_CEC_MSPINIT_CB_ID = 0x03U, /*!< CEC Msp Init callback ID */
- HAL_CEC_MSPDEINIT_CB_ID = 0x04U /*!< CEC Msp DeInit callback ID */
-}HAL_CEC_CallbackIDTypeDef;
-
-/**
- * @brief HAL CEC Callback pointer definition
- */
-typedef void (*pCEC_CallbackTypeDef)(CEC_HandleTypeDef * hcec); /*!< pointer to an CEC callback function */
-typedef void (*pCEC_RxCallbackTypeDef)(CEC_HandleTypeDef * hcec, uint32_t RxFrameSize); /*!< pointer to an Rx Transfer completed callback function */
-#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup CEC_Exported_Constants CEC Exported Constants
- * @{
- */
-
-/** @defgroup CEC_Error_Code CEC Error Code
- * @{
- */
-#define HAL_CEC_ERROR_NONE 0x00000000U /*!< no error */
-#define HAL_CEC_ERROR_BTE CEC_ESR_BTE /*!< Bit Timing Error */
-#define HAL_CEC_ERROR_BPE CEC_ESR_BPE /*!< Bit Period Error */
-#define HAL_CEC_ERROR_RBTFE CEC_ESR_RBTFE /*!< Rx Block Transfer Finished Error */
-#define HAL_CEC_ERROR_SBE CEC_ESR_SBE /*!< Start Bit Error */
-#define HAL_CEC_ERROR_ACKE CEC_ESR_ACKE /*!< Block Acknowledge Error */
-#define HAL_CEC_ERROR_LINE CEC_ESR_LINE /*!< Line Error */
-#define HAL_CEC_ERROR_TBTFE CEC_ESR_TBTFE /*!< Tx Block Transfer Finished Error */
-#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
-#define HAL_CEC_ERROR_INVALID_CALLBACK ((uint32_t)0x00000080U) /*!< Invalid Callback Error */
-#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
-/**
- * @}
- */
-
-/** @defgroup CEC_BitTimingErrorMode Bit Timing Error Mode
- * @{
- */
-#define CEC_BIT_TIMING_ERROR_MODE_STANDARD 0x00000000U /*!< Bit timing error Standard Mode */
-#define CEC_BIT_TIMING_ERROR_MODE_ERRORFREE CEC_CFGR_BTEM /*!< Bit timing error Free Mode */
-/**
- * @}
- */
-
-/** @defgroup CEC_BitPeriodErrorMode Bit Period Error Mode
- * @{
- */
-#define CEC_BIT_PERIOD_ERROR_MODE_STANDARD 0x00000000U /*!< Bit period error Standard Mode */
-#define CEC_BIT_PERIOD_ERROR_MODE_FLEXIBLE CEC_CFGR_BPEM /*!< Bit period error Flexible Mode */
-/**
- * @}
- */
-
-/** @defgroup CEC_Initiator_Position CEC Initiator logical address position in message header
- * @{
- */
-#define CEC_INITIATOR_LSB_POS 4U
-/**
- * @}
- */
-
-/** @defgroup CEC_OWN_ADDRESS CEC Own Address
- * @{
- */
-#define CEC_OWN_ADDRESS_NONE CEC_OWN_ADDRESS_0 /* Reset value */
-#define CEC_OWN_ADDRESS_0 ((uint16_t)0x0000U) /* Logical Address 0 */
-#define CEC_OWN_ADDRESS_1 ((uint16_t)0x0001U) /* Logical Address 1 */
-#define CEC_OWN_ADDRESS_2 ((uint16_t)0x0002U) /* Logical Address 2 */
-#define CEC_OWN_ADDRESS_3 ((uint16_t)0x0003U) /* Logical Address 3 */
-#define CEC_OWN_ADDRESS_4 ((uint16_t)0x0004U) /* Logical Address 4 */
-#define CEC_OWN_ADDRESS_5 ((uint16_t)0x0005U) /* Logical Address 5 */
-#define CEC_OWN_ADDRESS_6 ((uint16_t)0x0006U) /* Logical Address 6 */
-#define CEC_OWN_ADDRESS_7 ((uint16_t)0x0007U) /* Logical Address 7 */
-#define CEC_OWN_ADDRESS_8 ((uint16_t)0x0008U) /* Logical Address 8 */
-#define CEC_OWN_ADDRESS_9 ((uint16_t)0x0009U) /* Logical Address 9 */
-#define CEC_OWN_ADDRESS_10 ((uint16_t)0x000AU) /* Logical Address 10 */
-#define CEC_OWN_ADDRESS_11 ((uint16_t)0x000BU) /* Logical Address 11 */
-#define CEC_OWN_ADDRESS_12 ((uint16_t)0x000CU) /* Logical Address 12 */
-#define CEC_OWN_ADDRESS_13 ((uint16_t)0x000DU) /* Logical Address 13 */
-#define CEC_OWN_ADDRESS_14 ((uint16_t)0x000EU) /* Logical Address 14 */
-#define CEC_OWN_ADDRESS_15 ((uint16_t)0x000FU) /* Logical Address 15 */
-/**
- * @}
- */
-
-/** @defgroup CEC_Interrupts_Definitions Interrupts definition
- * @{
- */
-#define CEC_IT_IE CEC_CFGR_IE
-/**
- * @}
- */
-
-/** @defgroup CEC_Flags_Definitions Flags definition
- * @{
- */
-#define CEC_FLAG_TSOM CEC_CSR_TSOM
-#define CEC_FLAG_TEOM CEC_CSR_TEOM
-#define CEC_FLAG_TERR CEC_CSR_TERR
-#define CEC_FLAG_TBTRF CEC_CSR_TBTRF
-#define CEC_FLAG_RSOM CEC_CSR_RSOM
-#define CEC_FLAG_REOM CEC_CSR_REOM
-#define CEC_FLAG_RERR CEC_CSR_RERR
-#define CEC_FLAG_RBTF CEC_CSR_RBTF
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macros -----------------------------------------------------------*/
-/** @defgroup CEC_Exported_Macros CEC Exported Macros
- * @{
- */
-
-/** @brief Reset CEC handle gstate & RxState
- * @param __HANDLE__: CEC handle.
- * @retval None
- */
-#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
-#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \
- (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \
- (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \
- (__HANDLE__)->MspInitCallback = NULL; \
- (__HANDLE__)->MspDeInitCallback = NULL; \
- } while(0)
-#else
-#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \
- (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \
- (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \
- } while(0)
-#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
-
-/** @brief Checks whether or not the specified CEC interrupt flag is set.
- * @param __HANDLE__: specifies the CEC Handle.
- * @param __FLAG__: specifies the flag to check.
- * @arg CEC_FLAG_TERR: Tx Error
- * @arg CEC_FLAG_TBTRF:Tx Block Transfer Finished
- * @arg CEC_FLAG_RERR: Rx Error
- * @arg CEC_FLAG_RBTF: Rx Block Transfer Finished
- * @retval ITStatus
- */
-#define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__) READ_BIT((__HANDLE__)->Instance->CSR,(__FLAG__))
-
-/** @brief Clears the CEC's pending flags.
- * @param __HANDLE__: specifies the CEC Handle.
- * @param __FLAG__: specifies the flag to clear.
- * This parameter can be any combination of the following values:
- * @arg CEC_CSR_TERR: Tx Error
- * @arg CEC_FLAG_TBTRF: Tx Block Transfer Finished
- * @arg CEC_CSR_RERR: Rx Error
- * @arg CEC_CSR_RBTF: Rx Block Transfer Finished
- * @retval none
- */
-#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) \
- do { \
- uint32_t tmp = 0x0U; \
- tmp = (__HANDLE__)->Instance->CSR & 0x00000002U; \
- (__HANDLE__)->Instance->CSR &= (uint32_t)(((~(uint32_t)(__FLAG__)) & 0xFFFFFFFCU) | tmp);\
- } while(0U)
-
-/** @brief Enables the specified CEC interrupt.
- * @param __HANDLE__: specifies the CEC Handle.
- * @param __INTERRUPT__: specifies the CEC interrupt to enable.
- * This parameter can be:
- * @arg CEC_IT_IE : Interrupt Enable.
- * @retval none
- */
-#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CFGR, (__INTERRUPT__))
-
-/** @brief Disables the specified CEC interrupt.
- * @param __HANDLE__: specifies the CEC Handle.
- * @param __INTERRUPT__: specifies the CEC interrupt to disable.
- * This parameter can be:
- * @arg CEC_IT_IE : Interrupt Enable
- * @retval none
- */
-#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, (__INTERRUPT__))
-
-/** @brief Checks whether or not the specified CEC interrupt is enabled.
- * @param __HANDLE__: specifies the CEC Handle.
- * @param __INTERRUPT__: specifies the CEC interrupt to check.
- * This parameter can be:
- * @arg CEC_IT_IE : Interrupt Enable
- * @retval FlagStatus
- */
-#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) READ_BIT((__HANDLE__)->Instance->CFGR, (__INTERRUPT__))
-
-/** @brief Enables the CEC device
- * @param __HANDLE__: specifies the CEC Handle.
- * @retval none
- */
-#define __HAL_CEC_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_PE)
-
-/** @brief Disables the CEC device
- * @param __HANDLE__: specifies the CEC Handle.
- * @retval none
- */
-#define __HAL_CEC_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_PE)
-
-/** @brief Set Transmission Start flag
- * @param __HANDLE__: specifies the CEC Handle.
- * @retval none
- */
-#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TSOM)
-
-/** @brief Set Transmission End flag
- * @param __HANDLE__: specifies the CEC Handle.
- * @retval none
- */
-#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TEOM)
-
-/** @brief Get Transmission Start flag
- * @param __HANDLE__: specifies the CEC Handle.
- * @retval FlagStatus
- */
-#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) READ_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TSOM)
-
-/** @brief Get Transmission End flag
- * @param __HANDLE__: specifies the CEC Handle.
- * @retval FlagStatus
- */
-#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) READ_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TEOM)
-
-/** @brief Clear OAR register
- * @param __HANDLE__: specifies the CEC Handle.
- * @retval none
- */
-#define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->OAR, CEC_OAR_OA)
-
-/** @brief Set OAR register
- * @param __HANDLE__: specifies the CEC Handle.
- * @param __ADDRESS__: Own Address value.
- * @retval none
- */
-#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) MODIFY_REG((__HANDLE__)->Instance->OAR, CEC_OAR_OA, (__ADDRESS__));
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup CEC_Exported_Functions CEC Exported Functions
- * @{
- */
-
-/** @addtogroup CEC_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- * @{
- */
-/* Initialization and de-initialization functions ****************************/
-HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec);
-HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec);
-HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress);
-void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec);
-void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec);
-#if (USE_HAL_CEC_REGISTER_CALLBACKS == 1)
-HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID, pCEC_CallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_CEC_UnRegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID);
-
-HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_RxCallbackTypeDef pCallback);
-HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec);
-#endif /* USE_HAL_CEC_REGISTER_CALLBACKS */
-/**
- * @}
- */
-
-/** @addtogroup CEC_Exported_Functions_Group2 Input and Output operation functions
- * @brief CEC Transmit/Receive functions
- * @{
- */
-/* I/O operation functions ***************************************************/
-HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress,uint8_t DestinationAddress, uint8_t *pData, uint32_t Size);
-uint32_t HAL_CEC_GetLastReceivedFrameSize(CEC_HandleTypeDef *hcec);
-void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t* Rxbuffer);
-void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec);
-void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec);
-void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize);
-void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec);
-/**
- * @}
- */
-
-/** @defgroup CEC_Exported_Functions_Group3 Peripheral Control functions
- * @brief CEC control functions
- * @{
- */
-/* Peripheral State and Error functions ***************************************/
-HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec);
-uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec);
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Private types -------------------------------------------------------------*/
-/** @defgroup CEC_Private_Types CEC Private Types
- * @{
- */
-
-/**
- * @}
- */
-
-/* Private variables ---------------------------------------------------------*/
-/** @defgroup CEC_Private_Variables CEC Private Variables
- * @{
- */
-
-/**
- * @}
- */
-
-/* Private constants ---------------------------------------------------------*/
-/** @defgroup CEC_Private_Constants CEC Private Constants
- * @{
- */
-
-/**
- * @}
- */
-
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup CEC_Private_Macros CEC Private Macros
- * @{
- */
-#define IS_CEC_BIT_TIMING_ERROR_MODE(MODE) (((MODE) == CEC_BIT_TIMING_ERROR_MODE_STANDARD) || \
- ((MODE) == CEC_BIT_TIMING_ERROR_MODE_ERRORFREE))
-
-#define IS_CEC_BIT_PERIOD_ERROR_MODE(MODE) (((MODE) == CEC_BIT_PERIOD_ERROR_MODE_STANDARD) || \
- ((MODE) == CEC_BIT_PERIOD_ERROR_MODE_FLEXIBLE))
-
-/** @brief Check CEC message size.
- * The message size is the payload size: without counting the header,
- * it varies from 0 byte (ping operation, one header only, no payload) to
- * 15 bytes (1 opcode and up to 14 operands following the header).
- * @param __SIZE__: CEC message size.
- * @retval Test result (TRUE or FALSE).
- */
-#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0x10U)
-/** @brief Check CEC device Own Address Register (OAR) setting.
- * @param __ADDRESS__: CEC own address.
- * @retval Test result (TRUE or FALSE).
- */
-#define IS_CEC_OWN_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x0000000FU)
-
-/** @brief Check CEC initiator or destination logical address setting.
- * Initiator and destination addresses are coded over 4 bits.
- * @param __ADDRESS__: CEC initiator or logical address.
- * @retval Test result (TRUE or FALSE).
- */
-#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x0000000FU)
-
-
-
-/**
- * @}
- */
-/* Private functions ---------------------------------------------------------*/
-/** @defgroup CEC_Private_Functions CEC Private Functions
- * @{
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* CEC */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F1xx_HAL_CEC_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|