diff options
Diffstat (limited to 'lib/rp2040/hardware/regs/sio.h')
| -rw-r--r-- | lib/rp2040/hardware/regs/sio.h | 1656 |
1 files changed, 1656 insertions, 0 deletions
diff --git a/lib/rp2040/hardware/regs/sio.h b/lib/rp2040/hardware/regs/sio.h new file mode 100644 index 00000000..37ee2c13 --- /dev/null +++ b/lib/rp2040/hardware/regs/sio.h @@ -0,0 +1,1656 @@ +/** + * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +// ============================================================================= +// Register block : SIO +// Version : 1 +// Bus type : apb +// Description : Single-cycle IO block +// Provides core-local and inter-core hardware for the two +// processors, with single-cycle access. +// ============================================================================= +#ifndef HARDWARE_REGS_SIO_DEFINED +#define HARDWARE_REGS_SIO_DEFINED +// ============================================================================= +// Register : SIO_CPUID +// Description : Processor core identifier +// Value is 0 when read from processor core 0, and 1 when read +// from processor core 1. +#define SIO_CPUID_OFFSET _u(0x00000000) +#define SIO_CPUID_BITS _u(0xffffffff) +#define SIO_CPUID_RESET "-" +#define SIO_CPUID_MSB _u(31) +#define SIO_CPUID_LSB _u(0) +#define SIO_CPUID_ACCESS "RO" +// ============================================================================= +// Register : SIO_GPIO_IN +// Description : Input value for GPIO pins +// Input value for GPIO0...29 +#define SIO_GPIO_IN_OFFSET _u(0x00000004) +#define SIO_GPIO_IN_BITS _u(0x3fffffff) +#define SIO_GPIO_IN_RESET _u(0x00000000) +#define SIO_GPIO_IN_MSB _u(29) +#define SIO_GPIO_IN_LSB _u(0) +#define SIO_GPIO_IN_ACCESS "RO" +// ============================================================================= +// Register : SIO_GPIO_HI_IN +// Description : Input value for QSPI pins +// Input value on QSPI IO in order 0..5: SCLK, SSn, SD0, SD1, SD2, +// SD3 +#define SIO_GPIO_HI_IN_OFFSET _u(0x00000008) +#define SIO_GPIO_HI_IN_BITS _u(0x0000003f) +#define SIO_GPIO_HI_IN_RESET _u(0x00000000) +#define SIO_GPIO_HI_IN_MSB _u(5) +#define SIO_GPIO_HI_IN_LSB _u(0) +#define SIO_GPIO_HI_IN_ACCESS "RO" +// ============================================================================= +// Register : SIO_GPIO_OUT +// Description : GPIO output value +// Set output level (1/0 -> high/low) for GPIO0...29. +// Reading back gives the last value written, NOT the input value +// from the pins. +// If core 0 and core 1 both write to GPIO_OUT simultaneously (or +// to a SET/CLR/XOR alias), +// the result is as though the write from core 0 took place first, +// and the write from core 1 was then applied to that intermediate +// result. +#define SIO_GPIO_OUT_OFFSET _u(0x00000010) +#define SIO_GPIO_OUT_BITS _u(0x3fffffff) +#define SIO_GPIO_OUT_RESET _u(0x00000000) +#define SIO_GPIO_OUT_MSB _u(29) +#define SIO_GPIO_OUT_LSB _u(0) +#define SIO_GPIO_OUT_ACCESS "RW" +// ============================================================================= +// Register : SIO_GPIO_OUT_SET +// Description : GPIO output value set +// Perform an atomic bit-set on GPIO_OUT, i.e. `GPIO_OUT |= wdata` +#define SIO_GPIO_OUT_SET_OFFSET _u(0x00000014) +#define SIO_GPIO_OUT_SET_BITS _u(0x3fffffff) +#define SIO_GPIO_OUT_SET_RESET _u(0x00000000) +#define SIO_GPIO_OUT_SET_MSB _u(29) +#define SIO_GPIO_OUT_SET_LSB _u(0) +#define SIO_GPIO_OUT_SET_ACCESS "RW" +// ============================================================================= +// Register : SIO_GPIO_OUT_CLR +// Description : GPIO output value clear +// Perform an atomic bit-clear on GPIO_OUT, i.e. `GPIO_OUT &= +// ~wdata` +#define SIO_GPIO_OUT_CLR_OFFSET _u(0x00000018) +#define SIO_GPIO_OUT_CLR_BITS _u(0x3fffffff) +#define SIO_GPIO_OUT_CLR_RESET _u(0x00000000) +#define SIO_GPIO_OUT_CLR_MSB _u(29) +#define SIO_GPIO_OUT_CLR_LSB _u(0) +#define SIO_GPIO_OUT_CLR_ACCESS "RW" +// ============================================================================= +// Register : SIO_GPIO_OUT_XOR +// Description : GPIO output value XOR +// Perform an atomic bitwise XOR on GPIO_OUT, i.e. `GPIO_OUT ^= +// wdata` +#define SIO_GPIO_OUT_XOR_OFFSET _u(0x0000001c) +#define SIO_GPIO_OUT_XOR_BITS _u(0x3fffffff) +#define SIO_GPIO_OUT_XOR_RESET _u(0x00000000) +#define SIO_GPIO_OUT_XOR_MSB _u(29) +#define SIO_GPIO_OUT_XOR_LSB _u(0) +#define SIO_GPIO_OUT_XOR_ACCESS "RW" +// ============================================================================= +// Register : SIO_GPIO_OE +// Description : GPIO output enable +// Set output enable (1/0 -> output/input) for GPIO0...29. +// Reading back gives the last value written. +// If core 0 and core 1 both write to GPIO_OE simultaneously (or +// to a SET/CLR/XOR alias), +// the result is as though the write from core 0 took place first, +// and the write from core 1 was then applied to that intermediate +// result. +#define SIO_GPIO_OE_OFFSET _u(0x00000020) +#define SIO_GPIO_OE_BITS _u(0x3fffffff) +#define SIO_GPIO_OE_RESET _u(0x00000000) +#define SIO_GPIO_OE_MSB _u(29) +#define SIO_GPIO_OE_LSB _u(0) +#define SIO_GPIO_OE_ACCESS "RW" +// ============================================================================= +// Register : SIO_GPIO_OE_SET +// Description : GPIO output enable set +// Perform an atomic bit-set on GPIO_OE, i.e. `GPIO_OE |= wdata` +#define SIO_GPIO_OE_SET_OFFSET _u(0x00000024) +#define SIO_GPIO_OE_SET_BITS _u(0x3fffffff) +#define SIO_GPIO_OE_SET_RESET _u(0x00000000) +#define SIO_GPIO_OE_SET_MSB _u(29) +#define SIO_GPIO_OE_SET_LSB _u(0) +#define SIO_GPIO_OE_SET_ACCESS "RW" +// ============================================================================= +// Register : SIO_GPIO_OE_CLR +// Description : GPIO output enable clear +// Perform an atomic bit-clear on GPIO_OE, i.e. `GPIO_OE &= +// ~wdata` +#define SIO_GPIO_OE_CLR_OFFSET _u(0x00000028) +#define SIO_GPIO_OE_CLR_BITS _u(0x3fffffff) +#define SIO_GPIO_OE_CLR_RESET _u(0x00000000) +#define SIO_GPIO_OE_CLR_MSB _u(29) +#define SIO_GPIO_OE_CLR_LSB _u(0) +#define SIO_GPIO_OE_CLR_ACCESS "RW" +// ============================================================================= +// Register : SIO_GPIO_OE_XOR +// Description : GPIO output enable XOR +// Perform an atomic bitwise XOR on GPIO_OE, i.e. `GPIO_OE ^= +// wdata` +#define SIO_GPIO_OE_XOR_OFFSET _u(0x0000002c) +#define SIO_GPIO_OE_XOR_BITS _u(0x3fffffff) +#define SIO_GPIO_OE_XOR_RESET _u(0x00000000) +#define SIO_GPIO_OE_XOR_MSB _u(29) +#define SIO_GPIO_OE_XOR_LSB _u(0) +#define SIO_GPIO_OE_XOR_ACCESS "RW" +// ============================================================================= +// Register : SIO_GPIO_HI_OUT +// Description : QSPI output value +// Set output level (1/0 -> high/low) for QSPI IO0...5. +// Reading back gives the last value written, NOT the input value +// from the pins. +// If core 0 and core 1 both write to GPIO_HI_OUT simultaneously +// (or to a SET/CLR/XOR alias), +// the result is as though the write from core 0 took place first, +// and the write from core 1 was then applied to that intermediate +// result. +#define SIO_GPIO_HI_OUT_OFFSET _u(0x00000030) +#define SIO_GPIO_HI_OUT_BITS _u(0x0000003f) +#define SIO_GPIO_HI_OUT_RESET _u(0x00000000) +#define SIO_GPIO_HI_OUT_MSB _u(5) +#define SIO_GPIO_HI_OUT_LSB _u(0) +#define SIO_GPIO_HI_OUT_ACCESS "RW" +// ============================================================================= +// Register : SIO_GPIO_HI_OUT_SET +// Description : QSPI output value set +// Perform an atomic bit-set on GPIO_HI_OUT, i.e. `GPIO_HI_OUT |= +// wdata` +#define SIO_GPIO_HI_OUT_SET_OFFSET _u(0x00000034) +#define SIO_GPIO_HI_OUT_SET_BITS _u(0x0000003f) +#define SIO_GPIO_HI_OUT_SET_RESET _u(0x00000000) +#define SIO_GPIO_HI_OUT_SET_MSB _u(5) +#define SIO_GPIO_HI_OUT_SET_LSB _u(0) +#define SIO_GPIO_HI_OUT_SET_ACCESS "RW" +// ============================================================================= +// Register : SIO_GPIO_HI_OUT_CLR +// Description : QSPI output value clear +// Perform an atomic bit-clear on GPIO_HI_OUT, i.e. `GPIO_HI_OUT +// &= ~wdata` +#define SIO_GPIO_HI_OUT_CLR_OFFSET _u(0x00000038) +#define SIO_GPIO_HI_OUT_CLR_BITS _u(0x0000003f) +#define SIO_GPIO_HI_OUT_CLR_RESET _u(0x00000000) +#define SIO_GPIO_HI_OUT_CLR_MSB _u(5) +#define SIO_GPIO_HI_OUT_CLR_LSB _u(0) +#define SIO_GPIO_HI_OUT_CLR_ACCESS "RW" +// ============================================================================= +// Register : SIO_GPIO_HI_OUT_XOR +// Description : QSPI output value XOR +// Perform an atomic bitwise XOR on GPIO_HI_OUT, i.e. `GPIO_HI_OUT +// ^= wdata` +#define SIO_GPIO_HI_OUT_XOR_OFFSET _u(0x0000003c) +#define SIO_GPIO_HI_OUT_XOR_BITS _u(0x0000003f) +#define SIO_GPIO_HI_OUT_XOR_RESET _u(0x00000000) +#define SIO_GPIO_HI_OUT_XOR_MSB _u(5) +#define SIO_GPIO_HI_OUT_XOR_LSB _u(0) +#define SIO_GPIO_HI_OUT_XOR_ACCESS "RW" +// ============================================================================= +// Register : SIO_GPIO_HI_OE +// Description : QSPI output enable +// Set output enable (1/0 -> output/input) for QSPI IO0...5. +// Reading back gives the last value written. +// If core 0 and core 1 both write to GPIO_HI_OE simultaneously +// (or to a SET/CLR/XOR alias), +// the result is as though the write from core 0 took place first, +// and the write from core 1 was then applied to that intermediate +// result. +#define SIO_GPIO_HI_OE_OFFSET _u(0x00000040) +#define SIO_GPIO_HI_OE_BITS _u(0x0000003f) +#define SIO_GPIO_HI_OE_RESET _u(0x00000000) +#define SIO_GPIO_HI_OE_MSB _u(5) +#define SIO_GPIO_HI_OE_LSB _u(0) +#define SIO_GPIO_HI_OE_ACCESS "RW" +// ============================================================================= +// Register : SIO_GPIO_HI_OE_SET +// Description : QSPI output enable set +// Perform an atomic bit-set on GPIO_HI_OE, i.e. `GPIO_HI_OE |= +// wdata` +#define SIO_GPIO_HI_OE_SET_OFFSET _u(0x00000044) +#define SIO_GPIO_HI_OE_SET_BITS _u(0x0000003f) +#define SIO_GPIO_HI_OE_SET_RESET _u(0x00000000) +#define SIO_GPIO_HI_OE_SET_MSB _u(5) +#define SIO_GPIO_HI_OE_SET_LSB _u(0) +#define SIO_GPIO_HI_OE_SET_ACCESS "RW" +// ============================================================================= +// Register : SIO_GPIO_HI_OE_CLR +// Description : QSPI output enable clear +// Perform an atomic bit-clear on GPIO_HI_OE, i.e. `GPIO_HI_OE &= +// ~wdata` +#define SIO_GPIO_HI_OE_CLR_OFFSET _u(0x00000048) +#define SIO_GPIO_HI_OE_CLR_BITS _u(0x0000003f) +#define SIO_GPIO_HI_OE_CLR_RESET _u(0x00000000) +#define SIO_GPIO_HI_OE_CLR_MSB _u(5) +#define SIO_GPIO_HI_OE_CLR_LSB _u(0) +#define SIO_GPIO_HI_OE_CLR_ACCESS "RW" +// ============================================================================= +// Register : SIO_GPIO_HI_OE_XOR +// Description : QSPI output enable XOR +// Perform an atomic bitwise XOR on GPIO_HI_OE, i.e. `GPIO_HI_OE +// ^= wdata` +#define SIO_GPIO_HI_OE_XOR_OFFSET _u(0x0000004c) +#define SIO_GPIO_HI_OE_XOR_BITS _u(0x0000003f) +#define SIO_GPIO_HI_OE_XOR_RESET _u(0x00000000) +#define SIO_GPIO_HI_OE_XOR_MSB _u(5) +#define SIO_GPIO_HI_OE_XOR_LSB _u(0) +#define SIO_GPIO_HI_OE_XOR_ACCESS "RW" +// ============================================================================= +// Register : SIO_FIFO_ST +// Description : Status register for inter-core FIFOs (mailboxes). +// There is one FIFO in the core 0 -> core 1 direction, and one +// core 1 -> core 0. Both are 32 bits wide and 8 words deep. +// Core 0 can see the read side of the 1->0 FIFO (RX), and the +// write side of 0->1 FIFO (TX). +// Core 1 can see the read side of the 0->1 FIFO (RX), and the +// write side of 1->0 FIFO (TX). +// The SIO IRQ for each core is the logical OR of the VLD, WOF and +// ROE fields of its FIFO_ST register. +#define SIO_FIFO_ST_OFFSET _u(0x00000050) +#define SIO_FIFO_ST_BITS _u(0x0000000f) +#define SIO_FIFO_ST_RESET _u(0x00000002) +// ----------------------------------------------------------------------------- +// Field : SIO_FIFO_ST_ROE +// Description : Sticky flag indicating the RX FIFO was read when empty. This +// read was ignored by the FIFO. +#define SIO_FIFO_ST_ROE_RESET _u(0x0) +#define SIO_FIFO_ST_ROE_BITS _u(0x00000008) +#define SIO_FIFO_ST_ROE_MSB _u(3) +#define SIO_FIFO_ST_ROE_LSB _u(3) +#define SIO_FIFO_ST_ROE_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : SIO_FIFO_ST_WOF +// Description : Sticky flag indicating the TX FIFO was written when full. This +// write was ignored by the FIFO. +#define SIO_FIFO_ST_WOF_RESET _u(0x0) +#define SIO_FIFO_ST_WOF_BITS _u(0x00000004) +#define SIO_FIFO_ST_WOF_MSB _u(2) +#define SIO_FIFO_ST_WOF_LSB _u(2) +#define SIO_FIFO_ST_WOF_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : SIO_FIFO_ST_RDY +// Description : Value is 1 if this core's TX FIFO is not full (i.e. if FIFO_WR +// is ready for more data) +#define SIO_FIFO_ST_RDY_RESET _u(0x1) +#define SIO_FIFO_ST_RDY_BITS _u(0x00000002) +#define SIO_FIFO_ST_RDY_MSB _u(1) +#define SIO_FIFO_ST_RDY_LSB _u(1) +#define SIO_FIFO_ST_RDY_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : SIO_FIFO_ST_VLD +// Description : Value is 1 if this core's RX FIFO is not empty (i.e. if FIFO_RD +// is valid) +#define SIO_FIFO_ST_VLD_RESET _u(0x0) +#define SIO_FIFO_ST_VLD_BITS _u(0x00000001) +#define SIO_FIFO_ST_VLD_MSB _u(0) +#define SIO_FIFO_ST_VLD_LSB _u(0) +#define SIO_FIFO_ST_VLD_ACCESS "RO" +// ============================================================================= +// Register : SIO_FIFO_WR +// Description : Write access to this core's TX FIFO +#define SIO_FIFO_WR_OFFSET _u(0x00000054) +#define SIO_FIFO_WR_BITS _u(0xffffffff) +#define SIO_FIFO_WR_RESET _u(0x00000000) +#define SIO_FIFO_WR_MSB _u(31) +#define SIO_FIFO_WR_LSB _u(0) +#define SIO_FIFO_WR_ACCESS "WF" +// ============================================================================= +// Register : SIO_FIFO_RD +// Description : Read access to this core's RX FIFO +#define SIO_FIFO_RD_OFFSET _u(0x00000058) +#define SIO_FIFO_RD_BITS _u(0xffffffff) +#define SIO_FIFO_RD_RESET "-" +#define SIO_FIFO_RD_MSB _u(31) +#define SIO_FIFO_RD_LSB _u(0) +#define SIO_FIFO_RD_ACCESS "RF" +// ============================================================================= +// Register : SIO_SPINLOCK_ST +// Description : Spinlock state +// A bitmap containing the state of all 32 spinlocks (1=locked). +// Mainly intended for debugging. +#define SIO_SPINLOCK_ST_OFFSET _u(0x0000005c) +#define SIO_SPINLOCK_ST_BITS _u(0xffffffff) +#define SIO_SPINLOCK_ST_RESET _u(0x00000000) +#define SIO_SPINLOCK_ST_MSB _u(31) +#define SIO_SPINLOCK_ST_LSB _u(0) +#define SIO_SPINLOCK_ST_ACCESS "RO" +// ============================================================================= +// Register : SIO_DIV_UDIVIDEND +// Description : Divider unsigned dividend +// Write to the DIVIDEND operand of the divider, i.e. the p in `p +// / q`. +// Any operand write starts a new calculation. The results appear +// in QUOTIENT, REMAINDER. +// UDIVIDEND/SDIVIDEND are aliases of the same internal register. +// The U alias starts an +// unsigned calculation, and the S alias starts a signed +// calculation. +#define SIO_DIV_UDIVIDEND_OFFSET _u(0x00000060) +#define SIO_DIV_UDIVIDEND_BITS _u(0xffffffff) +#define SIO_DIV_UDIVIDEND_RESET _u(0x00000000) +#define SIO_DIV_UDIVIDEND_MSB _u(31) +#define SIO_DIV_UDIVIDEND_LSB _u(0) +#define SIO_DIV_UDIVIDEND_ACCESS "RW" +// ============================================================================= +// Register : SIO_DIV_UDIVISOR +// Description : Divider unsigned divisor +// Write to the DIVISOR operand of the divider, i.e. the q in `p / +// q`. +// Any operand write starts a new calculation. The results appear +// in QUOTIENT, REMAINDER. +// UDIVIDEND/SDIVIDEND are aliases of the same internal register. +// The U alias starts an +// unsigned calculation, and the S alias starts a signed +// calculation. +#define SIO_DIV_UDIVISOR_OFFSET _u(0x00000064) +#define SIO_DIV_UDIVISOR_BITS _u(0xffffffff) +#define SIO_DIV_UDIVISOR_RESET _u(0x00000000) +#define SIO_DIV_UDIVISOR_MSB _u(31) +#define SIO_DIV_UDIVISOR_LSB _u(0) +#define SIO_DIV_UDIVISOR_ACCESS "RW" +// ============================================================================= +// Register : SIO_DIV_SDIVIDEND +// Description : Divider signed dividend +// The same as UDIVIDEND, but starts a signed calculation, rather +// than unsigned. +#define SIO_DIV_SDIVIDEND_OFFSET _u(0x00000068) +#define SIO_DIV_SDIVIDEND_BITS _u(0xffffffff) +#define SIO_DIV_SDIVIDEND_RESET _u(0x00000000) +#define SIO_DIV_SDIVIDEND_MSB _u(31) +#define SIO_DIV_SDIVIDEND_LSB _u(0) +#define SIO_DIV_SDIVIDEND_ACCESS "RW" +// ============================================================================= +// Register : SIO_DIV_SDIVISOR +// Description : Divider signed divisor +// The same as UDIVISOR, but starts a signed calculation, rather +// than unsigned. +#define SIO_DIV_SDIVISOR_OFFSET _u(0x0000006c) +#define SIO_DIV_SDIVISOR_BITS _u(0xffffffff) +#define SIO_DIV_SDIVISOR_RESET _u(0x00000000) +#define SIO_DIV_SDIVISOR_MSB _u(31) +#define SIO_DIV_SDIVISOR_LSB _u(0) +#define SIO_DIV_SDIVISOR_ACCESS "RW" +// ============================================================================= +// Register : SIO_DIV_QUOTIENT +// Description : Divider result quotient +// The result of `DIVIDEND / DIVISOR` (division). Contents +// undefined while CSR_READY is low. +// For signed calculations, QUOTIENT is negative when the signs of +// DIVIDEND and DIVISOR differ. +// This register can be written to directly, for context +// save/restore purposes. This halts any +// in-progress calculation and sets the CSR_READY and CSR_DIRTY +// flags. +// Reading from QUOTIENT clears the CSR_DIRTY flag, so should read +// results in the order +// REMAINDER, QUOTIENT if CSR_DIRTY is used. +#define SIO_DIV_QUOTIENT_OFFSET _u(0x00000070) +#define SIO_DIV_QUOTIENT_BITS _u(0xffffffff) +#define SIO_DIV_QUOTIENT_RESET _u(0x00000000) +#define SIO_DIV_QUOTIENT_MSB _u(31) +#define SIO_DIV_QUOTIENT_LSB _u(0) +#define SIO_DIV_QUOTIENT_ACCESS "RW" +// ============================================================================= +// Register : SIO_DIV_REMAINDER +// Description : Divider result remainder +// The result of `DIVIDEND % DIVISOR` (modulo). Contents undefined +// while CSR_READY is low. +// For signed calculations, REMAINDER is negative only when +// DIVIDEND is negative. +// This register can be written to directly, for context +// save/restore purposes. This halts any +// in-progress calculation and sets the CSR_READY and CSR_DIRTY +// flags. +#define SIO_DIV_REMAINDER_OFFSET _u(0x00000074) +#define SIO_DIV_REMAINDER_BITS _u(0xffffffff) +#define SIO_DIV_REMAINDER_RESET _u(0x00000000) +#define SIO_DIV_REMAINDER_MSB _u(31) +#define SIO_DIV_REMAINDER_LSB _u(0) +#define SIO_DIV_REMAINDER_ACCESS "RW" +// ============================================================================= +// Register : SIO_DIV_CSR +// Description : Control and status register for divider. +#define SIO_DIV_CSR_OFFSET _u(0x00000078) +#define SIO_DIV_CSR_BITS _u(0x00000003) +#define SIO_DIV_CSR_RESET _u(0x00000001) +// ----------------------------------------------------------------------------- +// Field : SIO_DIV_CSR_DIRTY +// Description : Changes to 1 when any register is written, and back to 0 when +// QUOTIENT is read. +// Software can use this flag to make save/restore more efficient +// (skip if not DIRTY). +// If the flag is used in this way, it's recommended to either +// read QUOTIENT only, +// or REMAINDER and then QUOTIENT, to prevent data loss on context +// switch. +#define SIO_DIV_CSR_DIRTY_RESET _u(0x0) +#define SIO_DIV_CSR_DIRTY_BITS _u(0x00000002) +#define SIO_DIV_CSR_DIRTY_MSB _u(1) +#define SIO_DIV_CSR_DIRTY_LSB _u(1) +#define SIO_DIV_CSR_DIRTY_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : SIO_DIV_CSR_READY +// Description : Reads as 0 when a calculation is in progress, 1 otherwise. +// Writing an operand (xDIVIDEND, xDIVISOR) will immediately start +// a new calculation, no +// matter if one is already in progress. +// Writing to a result register will immediately terminate any +// in-progress calculation +// and set the READY and DIRTY flags. +#define SIO_DIV_CSR_READY_RESET _u(0x1) +#define SIO_DIV_CSR_READY_BITS _u(0x00000001) +#define SIO_DIV_CSR_READY_MSB _u(0) +#define SIO_DIV_CSR_READY_LSB _u(0) +#define SIO_DIV_CSR_READY_ACCESS "RO" +// ============================================================================= +// Register : SIO_INTERP0_ACCUM0 +// Description : Read/write access to accumulator 0 +#define SIO_INTERP0_ACCUM0_OFFSET _u(0x00000080) +#define SIO_INTERP0_ACCUM0_BITS _u(0xffffffff) +#define SIO_INTERP0_ACCUM0_RESET _u(0x00000000) +#define SIO_INTERP0_ACCUM0_MSB _u(31) +#define SIO_INTERP0_ACCUM0_LSB _u(0) +#define SIO_INTERP0_ACCUM0_ACCESS "RW" +// ============================================================================= +// Register : SIO_INTERP0_ACCUM1 +// Description : Read/write access to accumulator 1 +#define SIO_INTERP0_ACCUM1_OFFSET _u(0x00000084) +#define SIO_INTERP0_ACCUM1_BITS _u(0xffffffff) +#define SIO_INTERP0_ACCUM1_RESET _u(0x00000000) +#define SIO_INTERP0_ACCUM1_MSB _u(31) +#define SIO_INTERP0_ACCUM1_LSB _u(0) +#define SIO_INTERP0_ACCUM1_ACCESS "RW" +// ============================================================================= +// Register : SIO_INTERP0_BASE0 +// Description : Read/write access to BASE0 register. +#define SIO_INTERP0_BASE0_OFFSET _u(0x00000088) +#define SIO_INTERP0_BASE0_BITS _u(0xffffffff) +#define SIO_INTERP0_BASE0_RESET _u(0x00000000) +#define SIO_INTERP0_BASE0_MSB _u(31) +#define SIO_INTERP0_BASE0_LSB _u(0) +#define SIO_INTERP0_BASE0_ACCESS "RW" +// ============================================================================= +// Register : SIO_INTERP0_BASE1 +// Description : Read/write access to BASE1 register. +#define SIO_INTERP0_BASE1_OFFSET _u(0x0000008c) +#define SIO_INTERP0_BASE1_BITS _u(0xffffffff) +#define SIO_INTERP0_BASE1_RESET _u(0x00000000) +#define SIO_INTERP0_BASE1_MSB _u(31) +#define SIO_INTERP0_BASE1_LSB _u(0) +#define SIO_INTERP0_BASE1_ACCESS "RW" +// ============================================================================= +// Register : SIO_INTERP0_BASE2 +// Description : Read/write access to BASE2 register. +#define SIO_INTERP0_BASE2_OFFSET _u(0x00000090) +#define SIO_INTERP0_BASE2_BITS _u(0xffffffff) +#define SIO_INTERP0_BASE2_RESET _u(0x00000000) +#define SIO_INTERP0_BASE2_MSB _u(31) +#define SIO_INTERP0_BASE2_LSB _u(0) +#define SIO_INTERP0_BASE2_ACCESS "RW" +// ============================================================================= +// Register : SIO_INTERP0_POP_LANE0 +// Description : Read LANE0 result, and simultaneously write lane results to +// both accumulators (POP). +#define SIO_INTERP0_POP_LANE0_OFFSET _u(0x00000094) +#define SIO_INTERP0_POP_LANE0_BITS _u(0xffffffff) +#define SIO_INTERP0_POP_LANE0_RESET _u(0x00000000) +#define SIO_INTERP0_POP_LANE0_MSB _u(31) +#define SIO_INTERP0_POP_LANE0_LSB _u(0) +#define SIO_INTERP0_POP_LANE0_ACCESS "RO" +// ============================================================================= +// Register : SIO_INTERP0_POP_LANE1 +// Description : Read LANE1 result, and simultaneously write lane results to +// both accumulators (POP). +#define SIO_INTERP0_POP_LANE1_OFFSET _u(0x00000098) +#define SIO_INTERP0_POP_LANE1_BITS _u(0xffffffff) +#define SIO_INTERP0_POP_LANE1_RESET _u(0x00000000) +#define SIO_INTERP0_POP_LANE1_MSB _u(31) +#define SIO_INTERP0_POP_LANE1_LSB _u(0) +#define SIO_INTERP0_POP_LANE1_ACCESS "RO" +// ============================================================================= +// Register : SIO_INTERP0_POP_FULL +// Description : Read FULL result, and simultaneously write lane results to both +// accumulators (POP). +#define SIO_INTERP0_POP_FULL_OFFSET _u(0x0000009c) +#define SIO_INTERP0_POP_FULL_BITS _u(0xffffffff) +#define SIO_INTERP0_POP_FULL_RESET _u(0x00000000) +#define SIO_INTERP0_POP_FULL_MSB _u(31) +#define SIO_INTERP0_POP_FULL_LSB _u(0) +#define SIO_INTERP0_POP_FULL_ACCESS "RO" +// ============================================================================= +// Register : SIO_INTERP0_PEEK_LANE0 +// Description : Read LANE0 result, without altering any internal state (PEEK). +#define SIO_INTERP0_PEEK_LANE0_OFFSET _u(0x000000a0) +#define SIO_INTERP0_PEEK_LANE0_BITS _u(0xffffffff) +#define SIO_INTERP0_PEEK_LANE0_RESET _u(0x00000000) +#define SIO_INTERP0_PEEK_LANE0_MSB _u(31) +#define SIO_INTERP0_PEEK_LANE0_LSB _u(0) +#define SIO_INTERP0_PEEK_LANE0_ACCESS "RO" +// ============================================================================= +// Register : SIO_INTERP0_PEEK_LANE1 +// Description : Read LANE1 result, without altering any internal state (PEEK). +#define SIO_INTERP0_PEEK_LANE1_OFFSET _u(0x000000a4) +#define SIO_INTERP0_PEEK_LANE1_BITS _u(0xffffffff) +#define SIO_INTERP0_PEEK_LANE1_RESET _u(0x00000000) +#define SIO_INTERP0_PEEK_LANE1_MSB _u(31) +#define SIO_INTERP0_PEEK_LANE1_LSB _u(0) +#define SIO_INTERP0_PEEK_LANE1_ACCESS "RO" +// ============================================================================= +// Register : SIO_INTERP0_PEEK_FULL +// Description : Read FULL result, without altering any internal state (PEEK). +#define SIO_INTERP0_PEEK_FULL_OFFSET _u(0x000000a8) +#define SIO_INTERP0_PEEK_FULL_BITS _u(0xffffffff) +#define SIO_INTERP0_PEEK_FULL_RESET _u(0x00000000) +#define SIO_INTERP0_PEEK_FULL_MSB _u(31) +#define SIO_INTERP0_PEEK_FULL_LSB _u(0) +#define SIO_INTERP0_PEEK_FULL_ACCESS "RO" +// ============================================================================= +// Register : SIO_INTERP0_CTRL_LANE0 +// Description : Control register for lane 0 +#define SIO_INTERP0_CTRL_LANE0_OFFSET _u(0x000000ac) +#define SIO_INTERP0_CTRL_LANE0_BITS _u(0x03bfffff) +#define SIO_INTERP0_CTRL_LANE0_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE0_OVERF +// Description : Set if either OVERF0 or OVERF1 is set. +#define SIO_INTERP0_CTRL_LANE0_OVERF_RESET _u(0x0) +#define SIO_INTERP0_CTRL_LANE0_OVERF_BITS _u(0x02000000) +#define SIO_INTERP0_CTRL_LANE0_OVERF_MSB _u(25) +#define SIO_INTERP0_CTRL_LANE0_OVERF_LSB _u(25) +#define SIO_INTERP0_CTRL_LANE0_OVERF_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE0_OVERF1 +// Description : Indicates if any masked-off MSBs in ACCUM1 are set. +#define SIO_INTERP0_CTRL_LANE0_OVERF1_RESET _u(0x0) +#define SIO_INTERP0_CTRL_LANE0_OVERF1_BITS _u(0x01000000) +#define SIO_INTERP0_CTRL_LANE0_OVERF1_MSB _u(24) +#define SIO_INTERP0_CTRL_LANE0_OVERF1_LSB _u(24) +#define SIO_INTERP0_CTRL_LANE0_OVERF1_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE0_OVERF0 +// Description : Indicates if any masked-off MSBs in ACCUM0 are set. +#define SIO_INTERP0_CTRL_LANE0_OVERF0_RESET _u(0x0) +#define SIO_INTERP0_CTRL_LANE0_OVERF0_BITS _u(0x00800000) +#define SIO_INTERP0_CTRL_LANE0_OVERF0_MSB _u(23) +#define SIO_INTERP0_CTRL_LANE0_OVERF0_LSB _u(23) +#define SIO_INTERP0_CTRL_LANE0_OVERF0_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE0_BLEND +// Description : Only present on INTERP0 on each core. If BLEND mode is enabled: +// - LANE1 result is a linear interpolation between BASE0 and +// BASE1, controlled +// by the 8 LSBs of lane 1 shift and mask value (a fractional +// number between +// 0 and 255/256ths) +// - LANE0 result does not have BASE0 added (yields only the 8 +// LSBs of lane 1 shift+mask value) +// - FULL result does not have lane 1 shift+mask value added +// (BASE2 + lane 0 shift+mask) +// LANE1 SIGNED flag controls whether the interpolation is signed +// or unsigned. +#define SIO_INTERP0_CTRL_LANE0_BLEND_RESET _u(0x0) +#define SIO_INTERP0_CTRL_LANE0_BLEND_BITS _u(0x00200000) +#define SIO_INTERP0_CTRL_LANE0_BLEND_MSB _u(21) +#define SIO_INTERP0_CTRL_LANE0_BLEND_LSB _u(21) +#define SIO_INTERP0_CTRL_LANE0_BLEND_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE0_FORCE_MSB +// Description : ORed into bits 29:28 of the lane result presented to the +// processor on the bus. +// No effect on the internal 32-bit datapath. Handy for using a +// lane to generate sequence +// of pointers into flash or SRAM. +#define SIO_INTERP0_CTRL_LANE0_FORCE_MSB_RESET _u(0x0) +#define SIO_INTERP0_CTRL_LANE0_FORCE_MSB_BITS _u(0x00180000) +#define SIO_INTERP0_CTRL_LANE0_FORCE_MSB_MSB _u(20) +#define SIO_INTERP0_CTRL_LANE0_FORCE_MSB_LSB _u(19) +#define SIO_INTERP0_CTRL_LANE0_FORCE_MSB_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE0_ADD_RAW +// Description : If 1, mask + shift is bypassed for LANE0 result. This does not +// affect FULL result. +#define SIO_INTERP0_CTRL_LANE0_ADD_RAW_RESET _u(0x0) +#define SIO_INTERP0_CTRL_LANE0_ADD_RAW_BITS _u(0x00040000) +#define SIO_INTERP0_CTRL_LANE0_ADD_RAW_MSB _u(18) +#define SIO_INTERP0_CTRL_LANE0_ADD_RAW_LSB _u(18) +#define SIO_INTERP0_CTRL_LANE0_ADD_RAW_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE0_CROSS_RESULT +// Description : If 1, feed the opposite lane's result into this lane's +// accumulator on POP. +#define SIO_INTERP0_CTRL_LANE0_CROSS_RESULT_RESET _u(0x0) +#define SIO_INTERP0_CTRL_LANE0_CROSS_RESULT_BITS _u(0x00020000) +#define SIO_INTERP0_CTRL_LANE0_CROSS_RESULT_MSB _u(17) +#define SIO_INTERP0_CTRL_LANE0_CROSS_RESULT_LSB _u(17) +#define SIO_INTERP0_CTRL_LANE0_CROSS_RESULT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE0_CROSS_INPUT +// Description : If 1, feed the opposite lane's accumulator into this lane's +// shift + mask hardware. +// Takes effect even if ADD_RAW is set (the CROSS_INPUT mux is +// before the shift+mask bypass) +#define SIO_INTERP0_CTRL_LANE0_CROSS_INPUT_RESET _u(0x0) +#define SIO_INTERP0_CTRL_LANE0_CROSS_INPUT_BITS _u(0x00010000) +#define SIO_INTERP0_CTRL_LANE0_CROSS_INPUT_MSB _u(16) +#define SIO_INTERP0_CTRL_LANE0_CROSS_INPUT_LSB _u(16) +#define SIO_INTERP0_CTRL_LANE0_CROSS_INPUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE0_SIGNED +// Description : If SIGNED is set, the shifted and masked accumulator value is +// sign-extended to 32 bits +// before adding to BASE0, and LANE0 PEEK/POP appear extended to +// 32 bits when read by processor. +#define SIO_INTERP0_CTRL_LANE0_SIGNED_RESET _u(0x0) +#define SIO_INTERP0_CTRL_LANE0_SIGNED_BITS _u(0x00008000) +#define SIO_INTERP0_CTRL_LANE0_SIGNED_MSB _u(15) +#define SIO_INTERP0_CTRL_LANE0_SIGNED_LSB _u(15) +#define SIO_INTERP0_CTRL_LANE0_SIGNED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE0_MASK_MSB +// Description : The most-significant bit allowed to pass by the mask +// (inclusive) +// Setting MSB < LSB may cause chip to turn inside-out +#define SIO_INTERP0_CTRL_LANE0_MASK_MSB_RESET _u(0x00) +#define SIO_INTERP0_CTRL_LANE0_MASK_MSB_BITS _u(0x00007c00) +#define SIO_INTERP0_CTRL_LANE0_MASK_MSB_MSB _u(14) +#define SIO_INTERP0_CTRL_LANE0_MASK_MSB_LSB _u(10) +#define SIO_INTERP0_CTRL_LANE0_MASK_MSB_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE0_MASK_LSB +// Description : The least-significant bit allowed to pass by the mask +// (inclusive) +#define SIO_INTERP0_CTRL_LANE0_MASK_LSB_RESET _u(0x00) +#define SIO_INTERP0_CTRL_LANE0_MASK_LSB_BITS _u(0x000003e0) +#define SIO_INTERP0_CTRL_LANE0_MASK_LSB_MSB _u(9) +#define SIO_INTERP0_CTRL_LANE0_MASK_LSB_LSB _u(5) +#define SIO_INTERP0_CTRL_LANE0_MASK_LSB_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE0_SHIFT +// Description : Logical right-shift applied to accumulator before masking +#define SIO_INTERP0_CTRL_LANE0_SHIFT_RESET _u(0x00) +#define SIO_INTERP0_CTRL_LANE0_SHIFT_BITS _u(0x0000001f) +#define SIO_INTERP0_CTRL_LANE0_SHIFT_MSB _u(4) +#define SIO_INTERP0_CTRL_LANE0_SHIFT_LSB _u(0) +#define SIO_INTERP0_CTRL_LANE0_SHIFT_ACCESS "RW" +// ============================================================================= +// Register : SIO_INTERP0_CTRL_LANE1 +// Description : Control register for lane 1 +#define SIO_INTERP0_CTRL_LANE1_OFFSET _u(0x000000b0) +#define SIO_INTERP0_CTRL_LANE1_BITS _u(0x001fffff) +#define SIO_INTERP0_CTRL_LANE1_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE1_FORCE_MSB +// Description : ORed into bits 29:28 of the lane result presented to the +// processor on the bus. +// No effect on the internal 32-bit datapath. Handy for using a +// lane to generate sequence +// of pointers into flash or SRAM. +#define SIO_INTERP0_CTRL_LANE1_FORCE_MSB_RESET _u(0x0) +#define SIO_INTERP0_CTRL_LANE1_FORCE_MSB_BITS _u(0x00180000) +#define SIO_INTERP0_CTRL_LANE1_FORCE_MSB_MSB _u(20) +#define SIO_INTERP0_CTRL_LANE1_FORCE_MSB_LSB _u(19) +#define SIO_INTERP0_CTRL_LANE1_FORCE_MSB_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE1_ADD_RAW +// Description : If 1, mask + shift is bypassed for LANE1 result. This does not +// affect FULL result. +#define SIO_INTERP0_CTRL_LANE1_ADD_RAW_RESET _u(0x0) +#define SIO_INTERP0_CTRL_LANE1_ADD_RAW_BITS _u(0x00040000) +#define SIO_INTERP0_CTRL_LANE1_ADD_RAW_MSB _u(18) +#define SIO_INTERP0_CTRL_LANE1_ADD_RAW_LSB _u(18) +#define SIO_INTERP0_CTRL_LANE1_ADD_RAW_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE1_CROSS_RESULT +// Description : If 1, feed the opposite lane's result into this lane's +// accumulator on POP. +#define SIO_INTERP0_CTRL_LANE1_CROSS_RESULT_RESET _u(0x0) +#define SIO_INTERP0_CTRL_LANE1_CROSS_RESULT_BITS _u(0x00020000) +#define SIO_INTERP0_CTRL_LANE1_CROSS_RESULT_MSB _u(17) +#define SIO_INTERP0_CTRL_LANE1_CROSS_RESULT_LSB _u(17) +#define SIO_INTERP0_CTRL_LANE1_CROSS_RESULT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE1_CROSS_INPUT +// Description : If 1, feed the opposite lane's accumulator into this lane's +// shift + mask hardware. +// Takes effect even if ADD_RAW is set (the CROSS_INPUT mux is +// before the shift+mask bypass) +#define SIO_INTERP0_CTRL_LANE1_CROSS_INPUT_RESET _u(0x0) +#define SIO_INTERP0_CTRL_LANE1_CROSS_INPUT_BITS _u(0x00010000) +#define SIO_INTERP0_CTRL_LANE1_CROSS_INPUT_MSB _u(16) +#define SIO_INTERP0_CTRL_LANE1_CROSS_INPUT_LSB _u(16) +#define SIO_INTERP0_CTRL_LANE1_CROSS_INPUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE1_SIGNED +// Description : If SIGNED is set, the shifted and masked accumulator value is +// sign-extended to 32 bits +// before adding to BASE1, and LANE1 PEEK/POP appear extended to +// 32 bits when read by processor. +#define SIO_INTERP0_CTRL_LANE1_SIGNED_RESET _u(0x0) +#define SIO_INTERP0_CTRL_LANE1_SIGNED_BITS _u(0x00008000) +#define SIO_INTERP0_CTRL_LANE1_SIGNED_MSB _u(15) +#define SIO_INTERP0_CTRL_LANE1_SIGNED_LSB _u(15) +#define SIO_INTERP0_CTRL_LANE1_SIGNED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE1_MASK_MSB +// Description : The most-significant bit allowed to pass by the mask +// (inclusive) +// Setting MSB < LSB may cause chip to turn inside-out +#define SIO_INTERP0_CTRL_LANE1_MASK_MSB_RESET _u(0x00) +#define SIO_INTERP0_CTRL_LANE1_MASK_MSB_BITS _u(0x00007c00) +#define SIO_INTERP0_CTRL_LANE1_MASK_MSB_MSB _u(14) +#define SIO_INTERP0_CTRL_LANE1_MASK_MSB_LSB _u(10) +#define SIO_INTERP0_CTRL_LANE1_MASK_MSB_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE1_MASK_LSB +// Description : The least-significant bit allowed to pass by the mask +// (inclusive) +#define SIO_INTERP0_CTRL_LANE1_MASK_LSB_RESET _u(0x00) +#define SIO_INTERP0_CTRL_LANE1_MASK_LSB_BITS _u(0x000003e0) +#define SIO_INTERP0_CTRL_LANE1_MASK_LSB_MSB _u(9) +#define SIO_INTERP0_CTRL_LANE1_MASK_LSB_LSB _u(5) +#define SIO_INTERP0_CTRL_LANE1_MASK_LSB_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP0_CTRL_LANE1_SHIFT +// Description : Logical right-shift applied to accumulator before masking +#define SIO_INTERP0_CTRL_LANE1_SHIFT_RESET _u(0x00) +#define SIO_INTERP0_CTRL_LANE1_SHIFT_BITS _u(0x0000001f) +#define SIO_INTERP0_CTRL_LANE1_SHIFT_MSB _u(4) +#define SIO_INTERP0_CTRL_LANE1_SHIFT_LSB _u(0) +#define SIO_INTERP0_CTRL_LANE1_SHIFT_ACCESS "RW" +// ============================================================================= +// Register : SIO_INTERP0_ACCUM0_ADD +// Description : Values written here are atomically added to ACCUM0 +// Reading yields lane 0's raw shift and mask value (BASE0 not +// added). +#define SIO_INTERP0_ACCUM0_ADD_OFFSET _u(0x000000b4) +#define SIO_INTERP0_ACCUM0_ADD_BITS _u(0x00ffffff) +#define SIO_INTERP0_ACCUM0_ADD_RESET _u(0x00000000) +#define SIO_INTERP0_ACCUM0_ADD_MSB _u(23) +#define SIO_INTERP0_ACCUM0_ADD_LSB _u(0) +#define SIO_INTERP0_ACCUM0_ADD_ACCESS "RW" +// ============================================================================= +// Register : SIO_INTERP0_ACCUM1_ADD +// Description : Values written here are atomically added to ACCUM1 +// Reading yields lane 1's raw shift and mask value (BASE1 not +// added). +#define SIO_INTERP0_ACCUM1_ADD_OFFSET _u(0x000000b8) +#define SIO_INTERP0_ACCUM1_ADD_BITS _u(0x00ffffff) +#define SIO_INTERP0_ACCUM1_ADD_RESET _u(0x00000000) +#define SIO_INTERP0_ACCUM1_ADD_MSB _u(23) +#define SIO_INTERP0_ACCUM1_ADD_LSB _u(0) +#define SIO_INTERP0_ACCUM1_ADD_ACCESS "RW" +// ============================================================================= +// Register : SIO_INTERP0_BASE_1AND0 +// Description : On write, the lower 16 bits go to BASE0, upper bits to BASE1 +// simultaneously. +// Each half is sign-extended to 32 bits if that lane's SIGNED +// flag is set. +#define SIO_INTERP0_BASE_1AND0_OFFSET _u(0x000000bc) +#define SIO_INTERP0_BASE_1AND0_BITS _u(0xffffffff) +#define SIO_INTERP0_BASE_1AND0_RESET _u(0x00000000) +#define SIO_INTERP0_BASE_1AND0_MSB _u(31) +#define SIO_INTERP0_BASE_1AND0_LSB _u(0) +#define SIO_INTERP0_BASE_1AND0_ACCESS "WO" +// ============================================================================= +// Register : SIO_INTERP1_ACCUM0 +// Description : Read/write access to accumulator 0 +#define SIO_INTERP1_ACCUM0_OFFSET _u(0x000000c0) +#define SIO_INTERP1_ACCUM0_BITS _u(0xffffffff) +#define SIO_INTERP1_ACCUM0_RESET _u(0x00000000) +#define SIO_INTERP1_ACCUM0_MSB _u(31) +#define SIO_INTERP1_ACCUM0_LSB _u(0) +#define SIO_INTERP1_ACCUM0_ACCESS "RW" +// ============================================================================= +// Register : SIO_INTERP1_ACCUM1 +// Description : Read/write access to accumulator 1 +#define SIO_INTERP1_ACCUM1_OFFSET _u(0x000000c4) +#define SIO_INTERP1_ACCUM1_BITS _u(0xffffffff) +#define SIO_INTERP1_ACCUM1_RESET _u(0x00000000) +#define SIO_INTERP1_ACCUM1_MSB _u(31) +#define SIO_INTERP1_ACCUM1_LSB _u(0) +#define SIO_INTERP1_ACCUM1_ACCESS "RW" +// ============================================================================= +// Register : SIO_INTERP1_BASE0 +// Description : Read/write access to BASE0 register. +#define SIO_INTERP1_BASE0_OFFSET _u(0x000000c8) +#define SIO_INTERP1_BASE0_BITS _u(0xffffffff) +#define SIO_INTERP1_BASE0_RESET _u(0x00000000) +#define SIO_INTERP1_BASE0_MSB _u(31) +#define SIO_INTERP1_BASE0_LSB _u(0) +#define SIO_INTERP1_BASE0_ACCESS "RW" +// ============================================================================= +// Register : SIO_INTERP1_BASE1 +// Description : Read/write access to BASE1 register. +#define SIO_INTERP1_BASE1_OFFSET _u(0x000000cc) +#define SIO_INTERP1_BASE1_BITS _u(0xffffffff) +#define SIO_INTERP1_BASE1_RESET _u(0x00000000) +#define SIO_INTERP1_BASE1_MSB _u(31) +#define SIO_INTERP1_BASE1_LSB _u(0) +#define SIO_INTERP1_BASE1_ACCESS "RW" +// ============================================================================= +// Register : SIO_INTERP1_BASE2 +// Description : Read/write access to BASE2 register. +#define SIO_INTERP1_BASE2_OFFSET _u(0x000000d0) +#define SIO_INTERP1_BASE2_BITS _u(0xffffffff) +#define SIO_INTERP1_BASE2_RESET _u(0x00000000) +#define SIO_INTERP1_BASE2_MSB _u(31) +#define SIO_INTERP1_BASE2_LSB _u(0) +#define SIO_INTERP1_BASE2_ACCESS "RW" +// ============================================================================= +// Register : SIO_INTERP1_POP_LANE0 +// Description : Read LANE0 result, and simultaneously write lane results to +// both accumulators (POP). +#define SIO_INTERP1_POP_LANE0_OFFSET _u(0x000000d4) +#define SIO_INTERP1_POP_LANE0_BITS _u(0xffffffff) +#define SIO_INTERP1_POP_LANE0_RESET _u(0x00000000) +#define SIO_INTERP1_POP_LANE0_MSB _u(31) +#define SIO_INTERP1_POP_LANE0_LSB _u(0) +#define SIO_INTERP1_POP_LANE0_ACCESS "RO" +// ============================================================================= +// Register : SIO_INTERP1_POP_LANE1 +// Description : Read LANE1 result, and simultaneously write lane results to +// both accumulators (POP). +#define SIO_INTERP1_POP_LANE1_OFFSET _u(0x000000d8) +#define SIO_INTERP1_POP_LANE1_BITS _u(0xffffffff) +#define SIO_INTERP1_POP_LANE1_RESET _u(0x00000000) +#define SIO_INTERP1_POP_LANE1_MSB _u(31) +#define SIO_INTERP1_POP_LANE1_LSB _u(0) +#define SIO_INTERP1_POP_LANE1_ACCESS "RO" +// ============================================================================= +// Register : SIO_INTERP1_POP_FULL +// Description : Read FULL result, and simultaneously write lane results to both +// accumulators (POP). +#define SIO_INTERP1_POP_FULL_OFFSET _u(0x000000dc) +#define SIO_INTERP1_POP_FULL_BITS _u(0xffffffff) +#define SIO_INTERP1_POP_FULL_RESET _u(0x00000000) +#define SIO_INTERP1_POP_FULL_MSB _u(31) +#define SIO_INTERP1_POP_FULL_LSB _u(0) +#define SIO_INTERP1_POP_FULL_ACCESS "RO" +// ============================================================================= +// Register : SIO_INTERP1_PEEK_LANE0 +// Description : Read LANE0 result, without altering any internal state (PEEK). +#define SIO_INTERP1_PEEK_LANE0_OFFSET _u(0x000000e0) +#define SIO_INTERP1_PEEK_LANE0_BITS _u(0xffffffff) +#define SIO_INTERP1_PEEK_LANE0_RESET _u(0x00000000) +#define SIO_INTERP1_PEEK_LANE0_MSB _u(31) +#define SIO_INTERP1_PEEK_LANE0_LSB _u(0) +#define SIO_INTERP1_PEEK_LANE0_ACCESS "RO" +// ============================================================================= +// Register : SIO_INTERP1_PEEK_LANE1 +// Description : Read LANE1 result, without altering any internal state (PEEK). +#define SIO_INTERP1_PEEK_LANE1_OFFSET _u(0x000000e4) +#define SIO_INTERP1_PEEK_LANE1_BITS _u(0xffffffff) +#define SIO_INTERP1_PEEK_LANE1_RESET _u(0x00000000) +#define SIO_INTERP1_PEEK_LANE1_MSB _u(31) +#define SIO_INTERP1_PEEK_LANE1_LSB _u(0) +#define SIO_INTERP1_PEEK_LANE1_ACCESS "RO" +// ============================================================================= +// Register : SIO_INTERP1_PEEK_FULL +// Description : Read FULL result, without altering any internal state (PEEK). +#define SIO_INTERP1_PEEK_FULL_OFFSET _u(0x000000e8) +#define SIO_INTERP1_PEEK_FULL_BITS _u(0xffffffff) +#define SIO_INTERP1_PEEK_FULL_RESET _u(0x00000000) +#define SIO_INTERP1_PEEK_FULL_MSB _u(31) +#define SIO_INTERP1_PEEK_FULL_LSB _u(0) +#define SIO_INTERP1_PEEK_FULL_ACCESS "RO" +// ============================================================================= +// Register : SIO_INTERP1_CTRL_LANE0 +// Description : Control register for lane 0 +#define SIO_INTERP1_CTRL_LANE0_OFFSET _u(0x000000ec) +#define SIO_INTERP1_CTRL_LANE0_BITS _u(0x03dfffff) +#define SIO_INTERP1_CTRL_LANE0_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE0_OVERF +// Description : Set if either OVERF0 or OVERF1 is set. +#define SIO_INTERP1_CTRL_LANE0_OVERF_RESET _u(0x0) +#define SIO_INTERP1_CTRL_LANE0_OVERF_BITS _u(0x02000000) +#define SIO_INTERP1_CTRL_LANE0_OVERF_MSB _u(25) +#define SIO_INTERP1_CTRL_LANE0_OVERF_LSB _u(25) +#define SIO_INTERP1_CTRL_LANE0_OVERF_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE0_OVERF1 +// Description : Indicates if any masked-off MSBs in ACCUM1 are set. +#define SIO_INTERP1_CTRL_LANE0_OVERF1_RESET _u(0x0) +#define SIO_INTERP1_CTRL_LANE0_OVERF1_BITS _u(0x01000000) +#define SIO_INTERP1_CTRL_LANE0_OVERF1_MSB _u(24) +#define SIO_INTERP1_CTRL_LANE0_OVERF1_LSB _u(24) +#define SIO_INTERP1_CTRL_LANE0_OVERF1_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE0_OVERF0 +// Description : Indicates if any masked-off MSBs in ACCUM0 are set. +#define SIO_INTERP1_CTRL_LANE0_OVERF0_RESET _u(0x0) +#define SIO_INTERP1_CTRL_LANE0_OVERF0_BITS _u(0x00800000) +#define SIO_INTERP1_CTRL_LANE0_OVERF0_MSB _u(23) +#define SIO_INTERP1_CTRL_LANE0_OVERF0_LSB _u(23) +#define SIO_INTERP1_CTRL_LANE0_OVERF0_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE0_CLAMP +// Description : Only present on INTERP1 on each core. If CLAMP mode is enabled: +// - LANE0 result is shifted and masked ACCUM0, clamped by a lower +// bound of +// BASE0 and an upper bound of BASE1. +// - Signedness of these comparisons is determined by +// LANE0_CTRL_SIGNED +#define SIO_INTERP1_CTRL_LANE0_CLAMP_RESET _u(0x0) +#define SIO_INTERP1_CTRL_LANE0_CLAMP_BITS _u(0x00400000) +#define SIO_INTERP1_CTRL_LANE0_CLAMP_MSB _u(22) +#define SIO_INTERP1_CTRL_LANE0_CLAMP_LSB _u(22) +#define SIO_INTERP1_CTRL_LANE0_CLAMP_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE0_FORCE_MSB +// Description : ORed into bits 29:28 of the lane result presented to the +// processor on the bus. +// No effect on the internal 32-bit datapath. Handy for using a +// lane to generate sequence +// of pointers into flash or SRAM. +#define SIO_INTERP1_CTRL_LANE0_FORCE_MSB_RESET _u(0x0) +#define SIO_INTERP1_CTRL_LANE0_FORCE_MSB_BITS _u(0x00180000) +#define SIO_INTERP1_CTRL_LANE0_FORCE_MSB_MSB _u(20) +#define SIO_INTERP1_CTRL_LANE0_FORCE_MSB_LSB _u(19) +#define SIO_INTERP1_CTRL_LANE0_FORCE_MSB_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE0_ADD_RAW +// Description : If 1, mask + shift is bypassed for LANE0 result. This does not +// affect FULL result. +#define SIO_INTERP1_CTRL_LANE0_ADD_RAW_RESET _u(0x0) +#define SIO_INTERP1_CTRL_LANE0_ADD_RAW_BITS _u(0x00040000) +#define SIO_INTERP1_CTRL_LANE0_ADD_RAW_MSB _u(18) +#define SIO_INTERP1_CTRL_LANE0_ADD_RAW_LSB _u(18) +#define SIO_INTERP1_CTRL_LANE0_ADD_RAW_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE0_CROSS_RESULT +// Description : If 1, feed the opposite lane's result into this lane's +// accumulator on POP. +#define SIO_INTERP1_CTRL_LANE0_CROSS_RESULT_RESET _u(0x0) +#define SIO_INTERP1_CTRL_LANE0_CROSS_RESULT_BITS _u(0x00020000) +#define SIO_INTERP1_CTRL_LANE0_CROSS_RESULT_MSB _u(17) +#define SIO_INTERP1_CTRL_LANE0_CROSS_RESULT_LSB _u(17) +#define SIO_INTERP1_CTRL_LANE0_CROSS_RESULT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE0_CROSS_INPUT +// Description : If 1, feed the opposite lane's accumulator into this lane's +// shift + mask hardware. +// Takes effect even if ADD_RAW is set (the CROSS_INPUT mux is +// before the shift+mask bypass) +#define SIO_INTERP1_CTRL_LANE0_CROSS_INPUT_RESET _u(0x0) +#define SIO_INTERP1_CTRL_LANE0_CROSS_INPUT_BITS _u(0x00010000) +#define SIO_INTERP1_CTRL_LANE0_CROSS_INPUT_MSB _u(16) +#define SIO_INTERP1_CTRL_LANE0_CROSS_INPUT_LSB _u(16) +#define SIO_INTERP1_CTRL_LANE0_CROSS_INPUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE0_SIGNED +// Description : If SIGNED is set, the shifted and masked accumulator value is +// sign-extended to 32 bits +// before adding to BASE0, and LANE0 PEEK/POP appear extended to +// 32 bits when read by processor. +#define SIO_INTERP1_CTRL_LANE0_SIGNED_RESET _u(0x0) +#define SIO_INTERP1_CTRL_LANE0_SIGNED_BITS _u(0x00008000) +#define SIO_INTERP1_CTRL_LANE0_SIGNED_MSB _u(15) +#define SIO_INTERP1_CTRL_LANE0_SIGNED_LSB _u(15) +#define SIO_INTERP1_CTRL_LANE0_SIGNED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE0_MASK_MSB +// Description : The most-significant bit allowed to pass by the mask +// (inclusive) +// Setting MSB < LSB may cause chip to turn inside-out +#define SIO_INTERP1_CTRL_LANE0_MASK_MSB_RESET _u(0x00) +#define SIO_INTERP1_CTRL_LANE0_MASK_MSB_BITS _u(0x00007c00) +#define SIO_INTERP1_CTRL_LANE0_MASK_MSB_MSB _u(14) +#define SIO_INTERP1_CTRL_LANE0_MASK_MSB_LSB _u(10) +#define SIO_INTERP1_CTRL_LANE0_MASK_MSB_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE0_MASK_LSB +// Description : The least-significant bit allowed to pass by the mask +// (inclusive) +#define SIO_INTERP1_CTRL_LANE0_MASK_LSB_RESET _u(0x00) +#define SIO_INTERP1_CTRL_LANE0_MASK_LSB_BITS _u(0x000003e0) +#define SIO_INTERP1_CTRL_LANE0_MASK_LSB_MSB _u(9) +#define SIO_INTERP1_CTRL_LANE0_MASK_LSB_LSB _u(5) +#define SIO_INTERP1_CTRL_LANE0_MASK_LSB_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE0_SHIFT +// Description : Logical right-shift applied to accumulator before masking +#define SIO_INTERP1_CTRL_LANE0_SHIFT_RESET _u(0x00) +#define SIO_INTERP1_CTRL_LANE0_SHIFT_BITS _u(0x0000001f) +#define SIO_INTERP1_CTRL_LANE0_SHIFT_MSB _u(4) +#define SIO_INTERP1_CTRL_LANE0_SHIFT_LSB _u(0) +#define SIO_INTERP1_CTRL_LANE0_SHIFT_ACCESS "RW" +// ============================================================================= +// Register : SIO_INTERP1_CTRL_LANE1 +// Description : Control register for lane 1 +#define SIO_INTERP1_CTRL_LANE1_OFFSET _u(0x000000f0) +#define SIO_INTERP1_CTRL_LANE1_BITS _u(0x001fffff) +#define SIO_INTERP1_CTRL_LANE1_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE1_FORCE_MSB +// Description : ORed into bits 29:28 of the lane result presented to the +// processor on the bus. +// No effect on the internal 32-bit datapath. Handy for using a +// lane to generate sequence +// of pointers into flash or SRAM. +#define SIO_INTERP1_CTRL_LANE1_FORCE_MSB_RESET _u(0x0) +#define SIO_INTERP1_CTRL_LANE1_FORCE_MSB_BITS _u(0x00180000) +#define SIO_INTERP1_CTRL_LANE1_FORCE_MSB_MSB _u(20) +#define SIO_INTERP1_CTRL_LANE1_FORCE_MSB_LSB _u(19) +#define SIO_INTERP1_CTRL_LANE1_FORCE_MSB_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE1_ADD_RAW +// Description : If 1, mask + shift is bypassed for LANE1 result. This does not +// affect FULL result. +#define SIO_INTERP1_CTRL_LANE1_ADD_RAW_RESET _u(0x0) +#define SIO_INTERP1_CTRL_LANE1_ADD_RAW_BITS _u(0x00040000) +#define SIO_INTERP1_CTRL_LANE1_ADD_RAW_MSB _u(18) +#define SIO_INTERP1_CTRL_LANE1_ADD_RAW_LSB _u(18) +#define SIO_INTERP1_CTRL_LANE1_ADD_RAW_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE1_CROSS_RESULT +// Description : If 1, feed the opposite lane's result into this lane's +// accumulator on POP. +#define SIO_INTERP1_CTRL_LANE1_CROSS_RESULT_RESET _u(0x0) +#define SIO_INTERP1_CTRL_LANE1_CROSS_RESULT_BITS _u(0x00020000) +#define SIO_INTERP1_CTRL_LANE1_CROSS_RESULT_MSB _u(17) +#define SIO_INTERP1_CTRL_LANE1_CROSS_RESULT_LSB _u(17) +#define SIO_INTERP1_CTRL_LANE1_CROSS_RESULT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE1_CROSS_INPUT +// Description : If 1, feed the opposite lane's accumulator into this lane's +// shift + mask hardware. +// Takes effect even if ADD_RAW is set (the CROSS_INPUT mux is +// before the shift+mask bypass) +#define SIO_INTERP1_CTRL_LANE1_CROSS_INPUT_RESET _u(0x0) +#define SIO_INTERP1_CTRL_LANE1_CROSS_INPUT_BITS _u(0x00010000) +#define SIO_INTERP1_CTRL_LANE1_CROSS_INPUT_MSB _u(16) +#define SIO_INTERP1_CTRL_LANE1_CROSS_INPUT_LSB _u(16) +#define SIO_INTERP1_CTRL_LANE1_CROSS_INPUT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE1_SIGNED +// Description : If SIGNED is set, the shifted and masked accumulator value is +// sign-extended to 32 bits +// before adding to BASE1, and LANE1 PEEK/POP appear extended to +// 32 bits when read by processor. +#define SIO_INTERP1_CTRL_LANE1_SIGNED_RESET _u(0x0) +#define SIO_INTERP1_CTRL_LANE1_SIGNED_BITS _u(0x00008000) +#define SIO_INTERP1_CTRL_LANE1_SIGNED_MSB _u(15) +#define SIO_INTERP1_CTRL_LANE1_SIGNED_LSB _u(15) +#define SIO_INTERP1_CTRL_LANE1_SIGNED_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE1_MASK_MSB +// Description : The most-significant bit allowed to pass by the mask +// (inclusive) +// Setting MSB < LSB may cause chip to turn inside-out +#define SIO_INTERP1_CTRL_LANE1_MASK_MSB_RESET _u(0x00) +#define SIO_INTERP1_CTRL_LANE1_MASK_MSB_BITS _u(0x00007c00) +#define SIO_INTERP1_CTRL_LANE1_MASK_MSB_MSB _u(14) +#define SIO_INTERP1_CTRL_LANE1_MASK_MSB_LSB _u(10) +#define SIO_INTERP1_CTRL_LANE1_MASK_MSB_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE1_MASK_LSB +// Description : The least-significant bit allowed to pass by the mask +// (inclusive) +#define SIO_INTERP1_CTRL_LANE1_MASK_LSB_RESET _u(0x00) +#define SIO_INTERP1_CTRL_LANE1_MASK_LSB_BITS _u(0x000003e0) +#define SIO_INTERP1_CTRL_LANE1_MASK_LSB_MSB _u(9) +#define SIO_INTERP1_CTRL_LANE1_MASK_LSB_LSB _u(5) +#define SIO_INTERP1_CTRL_LANE1_MASK_LSB_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : SIO_INTERP1_CTRL_LANE1_SHIFT +// Description : Logical right-shift applied to accumulator before masking +#define SIO_INTERP1_CTRL_LANE1_SHIFT_RESET _u(0x00) +#define SIO_INTERP1_CTRL_LANE1_SHIFT_BITS _u(0x0000001f) +#define SIO_INTERP1_CTRL_LANE1_SHIFT_MSB _u(4) +#define SIO_INTERP1_CTRL_LANE1_SHIFT_LSB _u(0) +#define SIO_INTERP1_CTRL_LANE1_SHIFT_ACCESS "RW" +// ============================================================================= +// Register : SIO_INTERP1_ACCUM0_ADD +// Description : Values written here are atomically added to ACCUM0 +// Reading yields lane 0's raw shift and mask value (BASE0 not +// added). +#define SIO_INTERP1_ACCUM0_ADD_OFFSET _u(0x000000f4) +#define SIO_INTERP1_ACCUM0_ADD_BITS _u(0x00ffffff) +#define SIO_INTERP1_ACCUM0_ADD_RESET _u(0x00000000) +#define SIO_INTERP1_ACCUM0_ADD_MSB _u(23) +#define SIO_INTERP1_ACCUM0_ADD_LSB _u(0) +#define SIO_INTERP1_ACCUM0_ADD_ACCESS "RW" +// ============================================================================= +// Register : SIO_INTERP1_ACCUM1_ADD +// Description : Values written here are atomically added to ACCUM1 +// Reading yields lane 1's raw shift and mask value (BASE1 not +// added). +#define SIO_INTERP1_ACCUM1_ADD_OFFSET _u(0x000000f8) +#define SIO_INTERP1_ACCUM1_ADD_BITS _u(0x00ffffff) +#define SIO_INTERP1_ACCUM1_ADD_RESET _u(0x00000000) +#define SIO_INTERP1_ACCUM1_ADD_MSB _u(23) +#define SIO_INTERP1_ACCUM1_ADD_LSB _u(0) +#define SIO_INTERP1_ACCUM1_ADD_ACCESS "RW" +// ============================================================================= +// Register : SIO_INTERP1_BASE_1AND0 +// Description : On write, the lower 16 bits go to BASE0, upper bits to BASE1 +// simultaneously. +// Each half is sign-extended to 32 bits if that lane's SIGNED +// flag is set. +#define SIO_INTERP1_BASE_1AND0_OFFSET _u(0x000000fc) +#define SIO_INTERP1_BASE_1AND0_BITS _u(0xffffffff) +#define SIO_INTERP1_BASE_1AND0_RESET _u(0x00000000) +#define SIO_INTERP1_BASE_1AND0_MSB _u(31) +#define SIO_INTERP1_BASE_1AND0_LSB _u(0) +#define SIO_INTERP1_BASE_1AND0_ACCESS "WO" +// ============================================================================= +// Register : SIO_SPINLOCK0 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK0_OFFSET _u(0x00000100) +#define SIO_SPINLOCK0_BITS _u(0xffffffff) +#define SIO_SPINLOCK0_RESET _u(0x00000000) +#define SIO_SPINLOCK0_MSB _u(31) +#define SIO_SPINLOCK0_LSB _u(0) +#define SIO_SPINLOCK0_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK1 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK1_OFFSET _u(0x00000104) +#define SIO_SPINLOCK1_BITS _u(0xffffffff) +#define SIO_SPINLOCK1_RESET _u(0x00000000) +#define SIO_SPINLOCK1_MSB _u(31) +#define SIO_SPINLOCK1_LSB _u(0) +#define SIO_SPINLOCK1_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK2 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK2_OFFSET _u(0x00000108) +#define SIO_SPINLOCK2_BITS _u(0xffffffff) +#define SIO_SPINLOCK2_RESET _u(0x00000000) +#define SIO_SPINLOCK2_MSB _u(31) +#define SIO_SPINLOCK2_LSB _u(0) +#define SIO_SPINLOCK2_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK3 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK3_OFFSET _u(0x0000010c) +#define SIO_SPINLOCK3_BITS _u(0xffffffff) +#define SIO_SPINLOCK3_RESET _u(0x00000000) +#define SIO_SPINLOCK3_MSB _u(31) +#define SIO_SPINLOCK3_LSB _u(0) +#define SIO_SPINLOCK3_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK4 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK4_OFFSET _u(0x00000110) +#define SIO_SPINLOCK4_BITS _u(0xffffffff) +#define SIO_SPINLOCK4_RESET _u(0x00000000) +#define SIO_SPINLOCK4_MSB _u(31) +#define SIO_SPINLOCK4_LSB _u(0) +#define SIO_SPINLOCK4_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK5 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK5_OFFSET _u(0x00000114) +#define SIO_SPINLOCK5_BITS _u(0xffffffff) +#define SIO_SPINLOCK5_RESET _u(0x00000000) +#define SIO_SPINLOCK5_MSB _u(31) +#define SIO_SPINLOCK5_LSB _u(0) +#define SIO_SPINLOCK5_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK6 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK6_OFFSET _u(0x00000118) +#define SIO_SPINLOCK6_BITS _u(0xffffffff) +#define SIO_SPINLOCK6_RESET _u(0x00000000) +#define SIO_SPINLOCK6_MSB _u(31) +#define SIO_SPINLOCK6_LSB _u(0) +#define SIO_SPINLOCK6_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK7 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK7_OFFSET _u(0x0000011c) +#define SIO_SPINLOCK7_BITS _u(0xffffffff) +#define SIO_SPINLOCK7_RESET _u(0x00000000) +#define SIO_SPINLOCK7_MSB _u(31) +#define SIO_SPINLOCK7_LSB _u(0) +#define SIO_SPINLOCK7_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK8 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK8_OFFSET _u(0x00000120) +#define SIO_SPINLOCK8_BITS _u(0xffffffff) +#define SIO_SPINLOCK8_RESET _u(0x00000000) +#define SIO_SPINLOCK8_MSB _u(31) +#define SIO_SPINLOCK8_LSB _u(0) +#define SIO_SPINLOCK8_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK9 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK9_OFFSET _u(0x00000124) +#define SIO_SPINLOCK9_BITS _u(0xffffffff) +#define SIO_SPINLOCK9_RESET _u(0x00000000) +#define SIO_SPINLOCK9_MSB _u(31) +#define SIO_SPINLOCK9_LSB _u(0) +#define SIO_SPINLOCK9_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK10 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK10_OFFSET _u(0x00000128) +#define SIO_SPINLOCK10_BITS _u(0xffffffff) +#define SIO_SPINLOCK10_RESET _u(0x00000000) +#define SIO_SPINLOCK10_MSB _u(31) +#define SIO_SPINLOCK10_LSB _u(0) +#define SIO_SPINLOCK10_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK11 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK11_OFFSET _u(0x0000012c) +#define SIO_SPINLOCK11_BITS _u(0xffffffff) +#define SIO_SPINLOCK11_RESET _u(0x00000000) +#define SIO_SPINLOCK11_MSB _u(31) +#define SIO_SPINLOCK11_LSB _u(0) +#define SIO_SPINLOCK11_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK12 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK12_OFFSET _u(0x00000130) +#define SIO_SPINLOCK12_BITS _u(0xffffffff) +#define SIO_SPINLOCK12_RESET _u(0x00000000) +#define SIO_SPINLOCK12_MSB _u(31) +#define SIO_SPINLOCK12_LSB _u(0) +#define SIO_SPINLOCK12_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK13 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK13_OFFSET _u(0x00000134) +#define SIO_SPINLOCK13_BITS _u(0xffffffff) +#define SIO_SPINLOCK13_RESET _u(0x00000000) +#define SIO_SPINLOCK13_MSB _u(31) +#define SIO_SPINLOCK13_LSB _u(0) +#define SIO_SPINLOCK13_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK14 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK14_OFFSET _u(0x00000138) +#define SIO_SPINLOCK14_BITS _u(0xffffffff) +#define SIO_SPINLOCK14_RESET _u(0x00000000) +#define SIO_SPINLOCK14_MSB _u(31) +#define SIO_SPINLOCK14_LSB _u(0) +#define SIO_SPINLOCK14_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK15 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK15_OFFSET _u(0x0000013c) +#define SIO_SPINLOCK15_BITS _u(0xffffffff) +#define SIO_SPINLOCK15_RESET _u(0x00000000) +#define SIO_SPINLOCK15_MSB _u(31) +#define SIO_SPINLOCK15_LSB _u(0) +#define SIO_SPINLOCK15_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK16 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK16_OFFSET _u(0x00000140) +#define SIO_SPINLOCK16_BITS _u(0xffffffff) +#define SIO_SPINLOCK16_RESET _u(0x00000000) +#define SIO_SPINLOCK16_MSB _u(31) +#define SIO_SPINLOCK16_LSB _u(0) +#define SIO_SPINLOCK16_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK17 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK17_OFFSET _u(0x00000144) +#define SIO_SPINLOCK17_BITS _u(0xffffffff) +#define SIO_SPINLOCK17_RESET _u(0x00000000) +#define SIO_SPINLOCK17_MSB _u(31) +#define SIO_SPINLOCK17_LSB _u(0) +#define SIO_SPINLOCK17_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK18 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK18_OFFSET _u(0x00000148) +#define SIO_SPINLOCK18_BITS _u(0xffffffff) +#define SIO_SPINLOCK18_RESET _u(0x00000000) +#define SIO_SPINLOCK18_MSB _u(31) +#define SIO_SPINLOCK18_LSB _u(0) +#define SIO_SPINLOCK18_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK19 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK19_OFFSET _u(0x0000014c) +#define SIO_SPINLOCK19_BITS _u(0xffffffff) +#define SIO_SPINLOCK19_RESET _u(0x00000000) +#define SIO_SPINLOCK19_MSB _u(31) +#define SIO_SPINLOCK19_LSB _u(0) +#define SIO_SPINLOCK19_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK20 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK20_OFFSET _u(0x00000150) +#define SIO_SPINLOCK20_BITS _u(0xffffffff) +#define SIO_SPINLOCK20_RESET _u(0x00000000) +#define SIO_SPINLOCK20_MSB _u(31) +#define SIO_SPINLOCK20_LSB _u(0) +#define SIO_SPINLOCK20_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK21 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK21_OFFSET _u(0x00000154) +#define SIO_SPINLOCK21_BITS _u(0xffffffff) +#define SIO_SPINLOCK21_RESET _u(0x00000000) +#define SIO_SPINLOCK21_MSB _u(31) +#define SIO_SPINLOCK21_LSB _u(0) +#define SIO_SPINLOCK21_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK22 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK22_OFFSET _u(0x00000158) +#define SIO_SPINLOCK22_BITS _u(0xffffffff) +#define SIO_SPINLOCK22_RESET _u(0x00000000) +#define SIO_SPINLOCK22_MSB _u(31) +#define SIO_SPINLOCK22_LSB _u(0) +#define SIO_SPINLOCK22_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK23 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK23_OFFSET _u(0x0000015c) +#define SIO_SPINLOCK23_BITS _u(0xffffffff) +#define SIO_SPINLOCK23_RESET _u(0x00000000) +#define SIO_SPINLOCK23_MSB _u(31) +#define SIO_SPINLOCK23_LSB _u(0) +#define SIO_SPINLOCK23_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK24 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK24_OFFSET _u(0x00000160) +#define SIO_SPINLOCK24_BITS _u(0xffffffff) +#define SIO_SPINLOCK24_RESET _u(0x00000000) +#define SIO_SPINLOCK24_MSB _u(31) +#define SIO_SPINLOCK24_LSB _u(0) +#define SIO_SPINLOCK24_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK25 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK25_OFFSET _u(0x00000164) +#define SIO_SPINLOCK25_BITS _u(0xffffffff) +#define SIO_SPINLOCK25_RESET _u(0x00000000) +#define SIO_SPINLOCK25_MSB _u(31) +#define SIO_SPINLOCK25_LSB _u(0) +#define SIO_SPINLOCK25_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK26 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK26_OFFSET _u(0x00000168) +#define SIO_SPINLOCK26_BITS _u(0xffffffff) +#define SIO_SPINLOCK26_RESET _u(0x00000000) +#define SIO_SPINLOCK26_MSB _u(31) +#define SIO_SPINLOCK26_LSB _u(0) +#define SIO_SPINLOCK26_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK27 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK27_OFFSET _u(0x0000016c) +#define SIO_SPINLOCK27_BITS _u(0xffffffff) +#define SIO_SPINLOCK27_RESET _u(0x00000000) +#define SIO_SPINLOCK27_MSB _u(31) +#define SIO_SPINLOCK27_LSB _u(0) +#define SIO_SPINLOCK27_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK28 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK28_OFFSET _u(0x00000170) +#define SIO_SPINLOCK28_BITS _u(0xffffffff) +#define SIO_SPINLOCK28_RESET _u(0x00000000) +#define SIO_SPINLOCK28_MSB _u(31) +#define SIO_SPINLOCK28_LSB _u(0) +#define SIO_SPINLOCK28_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK29 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK29_OFFSET _u(0x00000174) +#define SIO_SPINLOCK29_BITS _u(0xffffffff) +#define SIO_SPINLOCK29_RESET _u(0x00000000) +#define SIO_SPINLOCK29_MSB _u(31) +#define SIO_SPINLOCK29_LSB _u(0) +#define SIO_SPINLOCK29_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK30 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK30_OFFSET _u(0x00000178) +#define SIO_SPINLOCK30_BITS _u(0xffffffff) +#define SIO_SPINLOCK30_RESET _u(0x00000000) +#define SIO_SPINLOCK30_MSB _u(31) +#define SIO_SPINLOCK30_LSB _u(0) +#define SIO_SPINLOCK30_ACCESS "RO" +// ============================================================================= +// Register : SIO_SPINLOCK31 +// Description : Reading from a spinlock address will: +// - Return 0 if lock is already locked +// - Otherwise return nonzero, and simultaneously claim the lock +// +// Writing (any value) releases the lock. +// If core 0 and core 1 attempt to claim the same lock +// simultaneously, core 0 wins. +// The value returned on success is 0x1 << lock number. +#define SIO_SPINLOCK31_OFFSET _u(0x0000017c) +#define SIO_SPINLOCK31_BITS _u(0xffffffff) +#define SIO_SPINLOCK31_RESET _u(0x00000000) +#define SIO_SPINLOCK31_MSB _u(31) +#define SIO_SPINLOCK31_LSB _u(0) +#define SIO_SPINLOCK31_ACCESS "RO" +// ============================================================================= +#endif // HARDWARE_REGS_SIO_DEFINED |