diff options
Diffstat (limited to 'lib/rp2040/hardware/regs/pio.h')
| -rw-r--r-- | lib/rp2040/hardware/regs/pio.h | 2762 |
1 files changed, 2762 insertions, 0 deletions
diff --git a/lib/rp2040/hardware/regs/pio.h b/lib/rp2040/hardware/regs/pio.h new file mode 100644 index 00000000..8b4829fb --- /dev/null +++ b/lib/rp2040/hardware/regs/pio.h @@ -0,0 +1,2762 @@ +/** + * Copyright (c) 2021 Raspberry Pi (Trading) Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +// ============================================================================= +// Register block : PIO +// Version : 1 +// Bus type : ahbl +// Description : Programmable IO block +// ============================================================================= +#ifndef HARDWARE_REGS_PIO_DEFINED +#define HARDWARE_REGS_PIO_DEFINED +// ============================================================================= +// Register : PIO_CTRL +// Description : PIO control register +#define PIO_CTRL_OFFSET _u(0x00000000) +#define PIO_CTRL_BITS _u(0x00000fff) +#define PIO_CTRL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PIO_CTRL_CLKDIV_RESTART +// Description : Restart a state machine's clock divider from an initial phase +// of 0. Clock dividers are free-running, so once started, their +// output (including fractional jitter) is completely determined +// by the integer/fractional divisor configured in SMx_CLKDIV. +// This means that, if multiple clock dividers with the same +// divisor are restarted simultaneously, by writing multiple 1 +// bits to this field, the execution clocks of those state +// machines will run in precise lockstep. +// +// Note that setting/clearing SM_ENABLE does not stop the clock +// divider from running, so once multiple state machines' clocks +// are synchronised, it is safe to disable/reenable a state +// machine, whilst keeping the clock dividers in sync. +// +// Note also that CLKDIV_RESTART can be written to whilst the +// state machine is running, and this is useful to resynchronise +// clock dividers after the divisors (SMx_CLKDIV) have been +// changed on-the-fly. +#define PIO_CTRL_CLKDIV_RESTART_RESET _u(0x0) +#define PIO_CTRL_CLKDIV_RESTART_BITS _u(0x00000f00) +#define PIO_CTRL_CLKDIV_RESTART_MSB _u(11) +#define PIO_CTRL_CLKDIV_RESTART_LSB _u(8) +#define PIO_CTRL_CLKDIV_RESTART_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : PIO_CTRL_SM_RESTART +// Description : Write 1 to instantly clear internal SM state which may be +// otherwise difficult to access and will affect future execution. +// +// Specifically, the following are cleared: input and output shift +// counters; the contents of the input shift register; the delay +// counter; the waiting-on-IRQ state; any stalled instruction +// written to SMx_INSTR or run by OUT/MOV EXEC; any pin write left +// asserted due to OUT_STICKY. +#define PIO_CTRL_SM_RESTART_RESET _u(0x0) +#define PIO_CTRL_SM_RESTART_BITS _u(0x000000f0) +#define PIO_CTRL_SM_RESTART_MSB _u(7) +#define PIO_CTRL_SM_RESTART_LSB _u(4) +#define PIO_CTRL_SM_RESTART_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : PIO_CTRL_SM_ENABLE +// Description : Enable/disable each of the four state machines by writing 1/0 +// to each of these four bits. When disabled, a state machine will +// cease executing instructions, except those written directly to +// SMx_INSTR by the system. Multiple bits can be set/cleared at +// once to run/halt multiple state machines simultaneously. +#define PIO_CTRL_SM_ENABLE_RESET _u(0x0) +#define PIO_CTRL_SM_ENABLE_BITS _u(0x0000000f) +#define PIO_CTRL_SM_ENABLE_MSB _u(3) +#define PIO_CTRL_SM_ENABLE_LSB _u(0) +#define PIO_CTRL_SM_ENABLE_ACCESS "RW" +// ============================================================================= +// Register : PIO_FSTAT +// Description : FIFO status register +#define PIO_FSTAT_OFFSET _u(0x00000004) +#define PIO_FSTAT_BITS _u(0x0f0f0f0f) +#define PIO_FSTAT_RESET _u(0x0f000f00) +// ----------------------------------------------------------------------------- +// Field : PIO_FSTAT_TXEMPTY +// Description : State machine TX FIFO is empty +#define PIO_FSTAT_TXEMPTY_RESET _u(0xf) +#define PIO_FSTAT_TXEMPTY_BITS _u(0x0f000000) +#define PIO_FSTAT_TXEMPTY_MSB _u(27) +#define PIO_FSTAT_TXEMPTY_LSB _u(24) +#define PIO_FSTAT_TXEMPTY_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_FSTAT_TXFULL +// Description : State machine TX FIFO is full +#define PIO_FSTAT_TXFULL_RESET _u(0x0) +#define PIO_FSTAT_TXFULL_BITS _u(0x000f0000) +#define PIO_FSTAT_TXFULL_MSB _u(19) +#define PIO_FSTAT_TXFULL_LSB _u(16) +#define PIO_FSTAT_TXFULL_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_FSTAT_RXEMPTY +// Description : State machine RX FIFO is empty +#define PIO_FSTAT_RXEMPTY_RESET _u(0xf) +#define PIO_FSTAT_RXEMPTY_BITS _u(0x00000f00) +#define PIO_FSTAT_RXEMPTY_MSB _u(11) +#define PIO_FSTAT_RXEMPTY_LSB _u(8) +#define PIO_FSTAT_RXEMPTY_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_FSTAT_RXFULL +// Description : State machine RX FIFO is full +#define PIO_FSTAT_RXFULL_RESET _u(0x0) +#define PIO_FSTAT_RXFULL_BITS _u(0x0000000f) +#define PIO_FSTAT_RXFULL_MSB _u(3) +#define PIO_FSTAT_RXFULL_LSB _u(0) +#define PIO_FSTAT_RXFULL_ACCESS "RO" +// ============================================================================= +// Register : PIO_FDEBUG +// Description : FIFO debug register +#define PIO_FDEBUG_OFFSET _u(0x00000008) +#define PIO_FDEBUG_BITS _u(0x0f0f0f0f) +#define PIO_FDEBUG_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PIO_FDEBUG_TXSTALL +// Description : State machine has stalled on empty TX FIFO during a blocking +// PULL, or an OUT with autopull enabled. Write 1 to clear. +#define PIO_FDEBUG_TXSTALL_RESET _u(0x0) +#define PIO_FDEBUG_TXSTALL_BITS _u(0x0f000000) +#define PIO_FDEBUG_TXSTALL_MSB _u(27) +#define PIO_FDEBUG_TXSTALL_LSB _u(24) +#define PIO_FDEBUG_TXSTALL_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : PIO_FDEBUG_TXOVER +// Description : TX FIFO overflow (i.e. write-on-full by the system) has +// occurred. Write 1 to clear. Note that write-on-full does not +// alter the state or contents of the FIFO in any way, but the +// data that the system attempted to write is dropped, so if this +// flag is set, your software has quite likely dropped some data +// on the floor. +#define PIO_FDEBUG_TXOVER_RESET _u(0x0) +#define PIO_FDEBUG_TXOVER_BITS _u(0x000f0000) +#define PIO_FDEBUG_TXOVER_MSB _u(19) +#define PIO_FDEBUG_TXOVER_LSB _u(16) +#define PIO_FDEBUG_TXOVER_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : PIO_FDEBUG_RXUNDER +// Description : RX FIFO underflow (i.e. read-on-empty by the system) has +// occurred. Write 1 to clear. Note that read-on-empty does not +// perturb the state of the FIFO in any way, but the data returned +// by reading from an empty FIFO is undefined, so this flag +// generally only becomes set due to some kind of software error. +#define PIO_FDEBUG_RXUNDER_RESET _u(0x0) +#define PIO_FDEBUG_RXUNDER_BITS _u(0x00000f00) +#define PIO_FDEBUG_RXUNDER_MSB _u(11) +#define PIO_FDEBUG_RXUNDER_LSB _u(8) +#define PIO_FDEBUG_RXUNDER_ACCESS "WC" +// ----------------------------------------------------------------------------- +// Field : PIO_FDEBUG_RXSTALL +// Description : State machine has stalled on full RX FIFO during a blocking +// PUSH, or an IN with autopush enabled. This flag is also set +// when a nonblocking PUSH to a full FIFO took place, in which +// case the state machine has dropped data. Write 1 to clear. +#define PIO_FDEBUG_RXSTALL_RESET _u(0x0) +#define PIO_FDEBUG_RXSTALL_BITS _u(0x0000000f) +#define PIO_FDEBUG_RXSTALL_MSB _u(3) +#define PIO_FDEBUG_RXSTALL_LSB _u(0) +#define PIO_FDEBUG_RXSTALL_ACCESS "WC" +// ============================================================================= +// Register : PIO_FLEVEL +// Description : FIFO levels +#define PIO_FLEVEL_OFFSET _u(0x0000000c) +#define PIO_FLEVEL_BITS _u(0xffffffff) +#define PIO_FLEVEL_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PIO_FLEVEL_RX3 +// Description : None +#define PIO_FLEVEL_RX3_RESET _u(0x0) +#define PIO_FLEVEL_RX3_BITS _u(0xf0000000) +#define PIO_FLEVEL_RX3_MSB _u(31) +#define PIO_FLEVEL_RX3_LSB _u(28) +#define PIO_FLEVEL_RX3_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_FLEVEL_TX3 +// Description : None +#define PIO_FLEVEL_TX3_RESET _u(0x0) +#define PIO_FLEVEL_TX3_BITS _u(0x0f000000) +#define PIO_FLEVEL_TX3_MSB _u(27) +#define PIO_FLEVEL_TX3_LSB _u(24) +#define PIO_FLEVEL_TX3_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_FLEVEL_RX2 +// Description : None +#define PIO_FLEVEL_RX2_RESET _u(0x0) +#define PIO_FLEVEL_RX2_BITS _u(0x00f00000) +#define PIO_FLEVEL_RX2_MSB _u(23) +#define PIO_FLEVEL_RX2_LSB _u(20) +#define PIO_FLEVEL_RX2_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_FLEVEL_TX2 +// Description : None +#define PIO_FLEVEL_TX2_RESET _u(0x0) +#define PIO_FLEVEL_TX2_BITS _u(0x000f0000) +#define PIO_FLEVEL_TX2_MSB _u(19) +#define PIO_FLEVEL_TX2_LSB _u(16) +#define PIO_FLEVEL_TX2_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_FLEVEL_RX1 +// Description : None +#define PIO_FLEVEL_RX1_RESET _u(0x0) +#define PIO_FLEVEL_RX1_BITS _u(0x0000f000) +#define PIO_FLEVEL_RX1_MSB _u(15) +#define PIO_FLEVEL_RX1_LSB _u(12) +#define PIO_FLEVEL_RX1_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_FLEVEL_TX1 +// Description : None +#define PIO_FLEVEL_TX1_RESET _u(0x0) +#define PIO_FLEVEL_TX1_BITS _u(0x00000f00) +#define PIO_FLEVEL_TX1_MSB _u(11) +#define PIO_FLEVEL_TX1_LSB _u(8) +#define PIO_FLEVEL_TX1_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_FLEVEL_RX0 +// Description : None +#define PIO_FLEVEL_RX0_RESET _u(0x0) +#define PIO_FLEVEL_RX0_BITS _u(0x000000f0) +#define PIO_FLEVEL_RX0_MSB _u(7) +#define PIO_FLEVEL_RX0_LSB _u(4) +#define PIO_FLEVEL_RX0_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_FLEVEL_TX0 +// Description : None +#define PIO_FLEVEL_TX0_RESET _u(0x0) +#define PIO_FLEVEL_TX0_BITS _u(0x0000000f) +#define PIO_FLEVEL_TX0_MSB _u(3) +#define PIO_FLEVEL_TX0_LSB _u(0) +#define PIO_FLEVEL_TX0_ACCESS "RO" +// ============================================================================= +// Register : PIO_TXF0 +// Description : Direct write access to the TX FIFO for this state machine. Each +// write pushes one word to the FIFO. Attempting to write to a +// full FIFO has no effect on the FIFO state or contents, and sets +// the sticky FDEBUG_TXOVER error flag for this FIFO. +#define PIO_TXF0_OFFSET _u(0x00000010) +#define PIO_TXF0_BITS _u(0xffffffff) +#define PIO_TXF0_RESET _u(0x00000000) +#define PIO_TXF0_MSB _u(31) +#define PIO_TXF0_LSB _u(0) +#define PIO_TXF0_ACCESS "WF" +// ============================================================================= +// Register : PIO_TXF1 +// Description : Direct write access to the TX FIFO for this state machine. Each +// write pushes one word to the FIFO. Attempting to write to a +// full FIFO has no effect on the FIFO state or contents, and sets +// the sticky FDEBUG_TXOVER error flag for this FIFO. +#define PIO_TXF1_OFFSET _u(0x00000014) +#define PIO_TXF1_BITS _u(0xffffffff) +#define PIO_TXF1_RESET _u(0x00000000) +#define PIO_TXF1_MSB _u(31) +#define PIO_TXF1_LSB _u(0) +#define PIO_TXF1_ACCESS "WF" +// ============================================================================= +// Register : PIO_TXF2 +// Description : Direct write access to the TX FIFO for this state machine. Each +// write pushes one word to the FIFO. Attempting to write to a +// full FIFO has no effect on the FIFO state or contents, and sets +// the sticky FDEBUG_TXOVER error flag for this FIFO. +#define PIO_TXF2_OFFSET _u(0x00000018) +#define PIO_TXF2_BITS _u(0xffffffff) +#define PIO_TXF2_RESET _u(0x00000000) +#define PIO_TXF2_MSB _u(31) +#define PIO_TXF2_LSB _u(0) +#define PIO_TXF2_ACCESS "WF" +// ============================================================================= +// Register : PIO_TXF3 +// Description : Direct write access to the TX FIFO for this state machine. Each +// write pushes one word to the FIFO. Attempting to write to a +// full FIFO has no effect on the FIFO state or contents, and sets +// the sticky FDEBUG_TXOVER error flag for this FIFO. +#define PIO_TXF3_OFFSET _u(0x0000001c) +#define PIO_TXF3_BITS _u(0xffffffff) +#define PIO_TXF3_RESET _u(0x00000000) +#define PIO_TXF3_MSB _u(31) +#define PIO_TXF3_LSB _u(0) +#define PIO_TXF3_ACCESS "WF" +// ============================================================================= +// Register : PIO_RXF0 +// Description : Direct read access to the RX FIFO for this state machine. Each +// read pops one word from the FIFO. Attempting to read from an +// empty FIFO has no effect on the FIFO state, and sets the sticky +// FDEBUG_RXUNDER error flag for this FIFO. The data returned to +// the system on a read from an empty FIFO is undefined. +#define PIO_RXF0_OFFSET _u(0x00000020) +#define PIO_RXF0_BITS _u(0xffffffff) +#define PIO_RXF0_RESET "-" +#define PIO_RXF0_MSB _u(31) +#define PIO_RXF0_LSB _u(0) +#define PIO_RXF0_ACCESS "RF" +// ============================================================================= +// Register : PIO_RXF1 +// Description : Direct read access to the RX FIFO for this state machine. Each +// read pops one word from the FIFO. Attempting to read from an +// empty FIFO has no effect on the FIFO state, and sets the sticky +// FDEBUG_RXUNDER error flag for this FIFO. The data returned to +// the system on a read from an empty FIFO is undefined. +#define PIO_RXF1_OFFSET _u(0x00000024) +#define PIO_RXF1_BITS _u(0xffffffff) +#define PIO_RXF1_RESET "-" +#define PIO_RXF1_MSB _u(31) +#define PIO_RXF1_LSB _u(0) +#define PIO_RXF1_ACCESS "RF" +// ============================================================================= +// Register : PIO_RXF2 +// Description : Direct read access to the RX FIFO for this state machine. Each +// read pops one word from the FIFO. Attempting to read from an +// empty FIFO has no effect on the FIFO state, and sets the sticky +// FDEBUG_RXUNDER error flag for this FIFO. The data returned to +// the system on a read from an empty FIFO is undefined. +#define PIO_RXF2_OFFSET _u(0x00000028) +#define PIO_RXF2_BITS _u(0xffffffff) +#define PIO_RXF2_RESET "-" +#define PIO_RXF2_MSB _u(31) +#define PIO_RXF2_LSB _u(0) +#define PIO_RXF2_ACCESS "RF" +// ============================================================================= +// Register : PIO_RXF3 +// Description : Direct read access to the RX FIFO for this state machine. Each +// read pops one word from the FIFO. Attempting to read from an +// empty FIFO has no effect on the FIFO state, and sets the sticky +// FDEBUG_RXUNDER error flag for this FIFO. The data returned to +// the system on a read from an empty FIFO is undefined. +#define PIO_RXF3_OFFSET _u(0x0000002c) +#define PIO_RXF3_BITS _u(0xffffffff) +#define PIO_RXF3_RESET "-" +#define PIO_RXF3_MSB _u(31) +#define PIO_RXF3_LSB _u(0) +#define PIO_RXF3_ACCESS "RF" +// ============================================================================= +// Register : PIO_IRQ +// Description : State machine IRQ flags register. Write 1 to clear. There are 8 +// state machine IRQ flags, which can be set, cleared, and waited +// on by the state machines. There's no fixed association between +// flags and state machines -- any state machine can use any flag. +// +// Any of the 8 flags can be used for timing synchronisation +// between state machines, using IRQ and WAIT instructions. The +// lower four of these flags are also routed out to system-level +// interrupt requests, alongside FIFO status interrupts -- see +// e.g. IRQ0_INTE. +#define PIO_IRQ_OFFSET _u(0x00000030) +#define PIO_IRQ_BITS _u(0x000000ff) +#define PIO_IRQ_RESET _u(0x00000000) +#define PIO_IRQ_MSB _u(7) +#define PIO_IRQ_LSB _u(0) +#define PIO_IRQ_ACCESS "WC" +// ============================================================================= +// Register : PIO_IRQ_FORCE +// Description : Writing a 1 to each of these bits will forcibly assert the +// corresponding IRQ. Note this is different to the INTF register: +// writing here affects PIO internal state. INTF just asserts the +// processor-facing IRQ signal for testing ISRs, and is not +// visible to the state machines. +#define PIO_IRQ_FORCE_OFFSET _u(0x00000034) +#define PIO_IRQ_FORCE_BITS _u(0x000000ff) +#define PIO_IRQ_FORCE_RESET _u(0x00000000) +#define PIO_IRQ_FORCE_MSB _u(7) +#define PIO_IRQ_FORCE_LSB _u(0) +#define PIO_IRQ_FORCE_ACCESS "WF" +// ============================================================================= +// Register : PIO_INPUT_SYNC_BYPASS +// Description : There is a 2-flipflop synchronizer on each GPIO input, which +// protects PIO logic from metastabilities. This increases input +// delay, and for fast synchronous IO (e.g. SPI) these +// synchronizers may need to be bypassed. Each bit in this +// register corresponds to one GPIO. +// 0 -> input is synchronized (default) +// 1 -> synchronizer is bypassed +// If in doubt, leave this register as all zeroes. +#define PIO_INPUT_SYNC_BYPASS_OFFSET _u(0x00000038) +#define PIO_INPUT_SYNC_BYPASS_BITS _u(0xffffffff) +#define PIO_INPUT_SYNC_BYPASS_RESET _u(0x00000000) +#define PIO_INPUT_SYNC_BYPASS_MSB _u(31) +#define PIO_INPUT_SYNC_BYPASS_LSB _u(0) +#define PIO_INPUT_SYNC_BYPASS_ACCESS "RW" +// ============================================================================= +// Register : PIO_DBG_PADOUT +// Description : Read to sample the pad output values PIO is currently driving +// to the GPIOs. +#define PIO_DBG_PADOUT_OFFSET _u(0x0000003c) +#define PIO_DBG_PADOUT_BITS _u(0xffffffff) +#define PIO_DBG_PADOUT_RESET _u(0x00000000) +#define PIO_DBG_PADOUT_MSB _u(31) +#define PIO_DBG_PADOUT_LSB _u(0) +#define PIO_DBG_PADOUT_ACCESS "RO" +// ============================================================================= +// Register : PIO_DBG_PADOE +// Description : Read to sample the pad output enables (direction) PIO is +// currently driving to the GPIOs. +#define PIO_DBG_PADOE_OFFSET _u(0x00000040) +#define PIO_DBG_PADOE_BITS _u(0xffffffff) +#define PIO_DBG_PADOE_RESET _u(0x00000000) +#define PIO_DBG_PADOE_MSB _u(31) +#define PIO_DBG_PADOE_LSB _u(0) +#define PIO_DBG_PADOE_ACCESS "RO" +// ============================================================================= +// Register : PIO_DBG_CFGINFO +// Description : The PIO hardware has some free parameters that may vary between +// chip products. +// These should be provided in the chip datasheet, but are also +// exposed here. +#define PIO_DBG_CFGINFO_OFFSET _u(0x00000044) +#define PIO_DBG_CFGINFO_BITS _u(0x003f0f3f) +#define PIO_DBG_CFGINFO_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PIO_DBG_CFGINFO_IMEM_SIZE +// Description : The size of the instruction memory, measured in units of one +// instruction +#define PIO_DBG_CFGINFO_IMEM_SIZE_RESET "-" +#define PIO_DBG_CFGINFO_IMEM_SIZE_BITS _u(0x003f0000) +#define PIO_DBG_CFGINFO_IMEM_SIZE_MSB _u(21) +#define PIO_DBG_CFGINFO_IMEM_SIZE_LSB _u(16) +#define PIO_DBG_CFGINFO_IMEM_SIZE_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_DBG_CFGINFO_SM_COUNT +// Description : The number of state machines this PIO instance is equipped +// with. +#define PIO_DBG_CFGINFO_SM_COUNT_RESET "-" +#define PIO_DBG_CFGINFO_SM_COUNT_BITS _u(0x00000f00) +#define PIO_DBG_CFGINFO_SM_COUNT_MSB _u(11) +#define PIO_DBG_CFGINFO_SM_COUNT_LSB _u(8) +#define PIO_DBG_CFGINFO_SM_COUNT_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_DBG_CFGINFO_FIFO_DEPTH +// Description : The depth of the state machine TX/RX FIFOs, measured in words. +// Joining fifos via SHIFTCTRL_FJOIN gives one FIFO with double +// this depth. +#define PIO_DBG_CFGINFO_FIFO_DEPTH_RESET "-" +#define PIO_DBG_CFGINFO_FIFO_DEPTH_BITS _u(0x0000003f) +#define PIO_DBG_CFGINFO_FIFO_DEPTH_MSB _u(5) +#define PIO_DBG_CFGINFO_FIFO_DEPTH_LSB _u(0) +#define PIO_DBG_CFGINFO_FIFO_DEPTH_ACCESS "RO" +// ============================================================================= +// Register : PIO_INSTR_MEM0 +// Description : Write-only access to instruction memory location 0 +#define PIO_INSTR_MEM0_OFFSET _u(0x00000048) +#define PIO_INSTR_MEM0_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM0_RESET _u(0x00000000) +#define PIO_INSTR_MEM0_MSB _u(15) +#define PIO_INSTR_MEM0_LSB _u(0) +#define PIO_INSTR_MEM0_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM1 +// Description : Write-only access to instruction memory location 1 +#define PIO_INSTR_MEM1_OFFSET _u(0x0000004c) +#define PIO_INSTR_MEM1_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM1_RESET _u(0x00000000) +#define PIO_INSTR_MEM1_MSB _u(15) +#define PIO_INSTR_MEM1_LSB _u(0) +#define PIO_INSTR_MEM1_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM2 +// Description : Write-only access to instruction memory location 2 +#define PIO_INSTR_MEM2_OFFSET _u(0x00000050) +#define PIO_INSTR_MEM2_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM2_RESET _u(0x00000000) +#define PIO_INSTR_MEM2_MSB _u(15) +#define PIO_INSTR_MEM2_LSB _u(0) +#define PIO_INSTR_MEM2_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM3 +// Description : Write-only access to instruction memory location 3 +#define PIO_INSTR_MEM3_OFFSET _u(0x00000054) +#define PIO_INSTR_MEM3_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM3_RESET _u(0x00000000) +#define PIO_INSTR_MEM3_MSB _u(15) +#define PIO_INSTR_MEM3_LSB _u(0) +#define PIO_INSTR_MEM3_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM4 +// Description : Write-only access to instruction memory location 4 +#define PIO_INSTR_MEM4_OFFSET _u(0x00000058) +#define PIO_INSTR_MEM4_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM4_RESET _u(0x00000000) +#define PIO_INSTR_MEM4_MSB _u(15) +#define PIO_INSTR_MEM4_LSB _u(0) +#define PIO_INSTR_MEM4_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM5 +// Description : Write-only access to instruction memory location 5 +#define PIO_INSTR_MEM5_OFFSET _u(0x0000005c) +#define PIO_INSTR_MEM5_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM5_RESET _u(0x00000000) +#define PIO_INSTR_MEM5_MSB _u(15) +#define PIO_INSTR_MEM5_LSB _u(0) +#define PIO_INSTR_MEM5_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM6 +// Description : Write-only access to instruction memory location 6 +#define PIO_INSTR_MEM6_OFFSET _u(0x00000060) +#define PIO_INSTR_MEM6_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM6_RESET _u(0x00000000) +#define PIO_INSTR_MEM6_MSB _u(15) +#define PIO_INSTR_MEM6_LSB _u(0) +#define PIO_INSTR_MEM6_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM7 +// Description : Write-only access to instruction memory location 7 +#define PIO_INSTR_MEM7_OFFSET _u(0x00000064) +#define PIO_INSTR_MEM7_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM7_RESET _u(0x00000000) +#define PIO_INSTR_MEM7_MSB _u(15) +#define PIO_INSTR_MEM7_LSB _u(0) +#define PIO_INSTR_MEM7_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM8 +// Description : Write-only access to instruction memory location 8 +#define PIO_INSTR_MEM8_OFFSET _u(0x00000068) +#define PIO_INSTR_MEM8_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM8_RESET _u(0x00000000) +#define PIO_INSTR_MEM8_MSB _u(15) +#define PIO_INSTR_MEM8_LSB _u(0) +#define PIO_INSTR_MEM8_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM9 +// Description : Write-only access to instruction memory location 9 +#define PIO_INSTR_MEM9_OFFSET _u(0x0000006c) +#define PIO_INSTR_MEM9_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM9_RESET _u(0x00000000) +#define PIO_INSTR_MEM9_MSB _u(15) +#define PIO_INSTR_MEM9_LSB _u(0) +#define PIO_INSTR_MEM9_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM10 +// Description : Write-only access to instruction memory location 10 +#define PIO_INSTR_MEM10_OFFSET _u(0x00000070) +#define PIO_INSTR_MEM10_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM10_RESET _u(0x00000000) +#define PIO_INSTR_MEM10_MSB _u(15) +#define PIO_INSTR_MEM10_LSB _u(0) +#define PIO_INSTR_MEM10_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM11 +// Description : Write-only access to instruction memory location 11 +#define PIO_INSTR_MEM11_OFFSET _u(0x00000074) +#define PIO_INSTR_MEM11_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM11_RESET _u(0x00000000) +#define PIO_INSTR_MEM11_MSB _u(15) +#define PIO_INSTR_MEM11_LSB _u(0) +#define PIO_INSTR_MEM11_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM12 +// Description : Write-only access to instruction memory location 12 +#define PIO_INSTR_MEM12_OFFSET _u(0x00000078) +#define PIO_INSTR_MEM12_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM12_RESET _u(0x00000000) +#define PIO_INSTR_MEM12_MSB _u(15) +#define PIO_INSTR_MEM12_LSB _u(0) +#define PIO_INSTR_MEM12_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM13 +// Description : Write-only access to instruction memory location 13 +#define PIO_INSTR_MEM13_OFFSET _u(0x0000007c) +#define PIO_INSTR_MEM13_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM13_RESET _u(0x00000000) +#define PIO_INSTR_MEM13_MSB _u(15) +#define PIO_INSTR_MEM13_LSB _u(0) +#define PIO_INSTR_MEM13_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM14 +// Description : Write-only access to instruction memory location 14 +#define PIO_INSTR_MEM14_OFFSET _u(0x00000080) +#define PIO_INSTR_MEM14_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM14_RESET _u(0x00000000) +#define PIO_INSTR_MEM14_MSB _u(15) +#define PIO_INSTR_MEM14_LSB _u(0) +#define PIO_INSTR_MEM14_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM15 +// Description : Write-only access to instruction memory location 15 +#define PIO_INSTR_MEM15_OFFSET _u(0x00000084) +#define PIO_INSTR_MEM15_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM15_RESET _u(0x00000000) +#define PIO_INSTR_MEM15_MSB _u(15) +#define PIO_INSTR_MEM15_LSB _u(0) +#define PIO_INSTR_MEM15_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM16 +// Description : Write-only access to instruction memory location 16 +#define PIO_INSTR_MEM16_OFFSET _u(0x00000088) +#define PIO_INSTR_MEM16_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM16_RESET _u(0x00000000) +#define PIO_INSTR_MEM16_MSB _u(15) +#define PIO_INSTR_MEM16_LSB _u(0) +#define PIO_INSTR_MEM16_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM17 +// Description : Write-only access to instruction memory location 17 +#define PIO_INSTR_MEM17_OFFSET _u(0x0000008c) +#define PIO_INSTR_MEM17_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM17_RESET _u(0x00000000) +#define PIO_INSTR_MEM17_MSB _u(15) +#define PIO_INSTR_MEM17_LSB _u(0) +#define PIO_INSTR_MEM17_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM18 +// Description : Write-only access to instruction memory location 18 +#define PIO_INSTR_MEM18_OFFSET _u(0x00000090) +#define PIO_INSTR_MEM18_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM18_RESET _u(0x00000000) +#define PIO_INSTR_MEM18_MSB _u(15) +#define PIO_INSTR_MEM18_LSB _u(0) +#define PIO_INSTR_MEM18_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM19 +// Description : Write-only access to instruction memory location 19 +#define PIO_INSTR_MEM19_OFFSET _u(0x00000094) +#define PIO_INSTR_MEM19_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM19_RESET _u(0x00000000) +#define PIO_INSTR_MEM19_MSB _u(15) +#define PIO_INSTR_MEM19_LSB _u(0) +#define PIO_INSTR_MEM19_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM20 +// Description : Write-only access to instruction memory location 20 +#define PIO_INSTR_MEM20_OFFSET _u(0x00000098) +#define PIO_INSTR_MEM20_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM20_RESET _u(0x00000000) +#define PIO_INSTR_MEM20_MSB _u(15) +#define PIO_INSTR_MEM20_LSB _u(0) +#define PIO_INSTR_MEM20_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM21 +// Description : Write-only access to instruction memory location 21 +#define PIO_INSTR_MEM21_OFFSET _u(0x0000009c) +#define PIO_INSTR_MEM21_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM21_RESET _u(0x00000000) +#define PIO_INSTR_MEM21_MSB _u(15) +#define PIO_INSTR_MEM21_LSB _u(0) +#define PIO_INSTR_MEM21_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM22 +// Description : Write-only access to instruction memory location 22 +#define PIO_INSTR_MEM22_OFFSET _u(0x000000a0) +#define PIO_INSTR_MEM22_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM22_RESET _u(0x00000000) +#define PIO_INSTR_MEM22_MSB _u(15) +#define PIO_INSTR_MEM22_LSB _u(0) +#define PIO_INSTR_MEM22_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM23 +// Description : Write-only access to instruction memory location 23 +#define PIO_INSTR_MEM23_OFFSET _u(0x000000a4) +#define PIO_INSTR_MEM23_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM23_RESET _u(0x00000000) +#define PIO_INSTR_MEM23_MSB _u(15) +#define PIO_INSTR_MEM23_LSB _u(0) +#define PIO_INSTR_MEM23_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM24 +// Description : Write-only access to instruction memory location 24 +#define PIO_INSTR_MEM24_OFFSET _u(0x000000a8) +#define PIO_INSTR_MEM24_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM24_RESET _u(0x00000000) +#define PIO_INSTR_MEM24_MSB _u(15) +#define PIO_INSTR_MEM24_LSB _u(0) +#define PIO_INSTR_MEM24_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM25 +// Description : Write-only access to instruction memory location 25 +#define PIO_INSTR_MEM25_OFFSET _u(0x000000ac) +#define PIO_INSTR_MEM25_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM25_RESET _u(0x00000000) +#define PIO_INSTR_MEM25_MSB _u(15) +#define PIO_INSTR_MEM25_LSB _u(0) +#define PIO_INSTR_MEM25_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM26 +// Description : Write-only access to instruction memory location 26 +#define PIO_INSTR_MEM26_OFFSET _u(0x000000b0) +#define PIO_INSTR_MEM26_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM26_RESET _u(0x00000000) +#define PIO_INSTR_MEM26_MSB _u(15) +#define PIO_INSTR_MEM26_LSB _u(0) +#define PIO_INSTR_MEM26_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM27 +// Description : Write-only access to instruction memory location 27 +#define PIO_INSTR_MEM27_OFFSET _u(0x000000b4) +#define PIO_INSTR_MEM27_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM27_RESET _u(0x00000000) +#define PIO_INSTR_MEM27_MSB _u(15) +#define PIO_INSTR_MEM27_LSB _u(0) +#define PIO_INSTR_MEM27_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM28 +// Description : Write-only access to instruction memory location 28 +#define PIO_INSTR_MEM28_OFFSET _u(0x000000b8) +#define PIO_INSTR_MEM28_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM28_RESET _u(0x00000000) +#define PIO_INSTR_MEM28_MSB _u(15) +#define PIO_INSTR_MEM28_LSB _u(0) +#define PIO_INSTR_MEM28_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM29 +// Description : Write-only access to instruction memory location 29 +#define PIO_INSTR_MEM29_OFFSET _u(0x000000bc) +#define PIO_INSTR_MEM29_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM29_RESET _u(0x00000000) +#define PIO_INSTR_MEM29_MSB _u(15) +#define PIO_INSTR_MEM29_LSB _u(0) +#define PIO_INSTR_MEM29_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM30 +// Description : Write-only access to instruction memory location 30 +#define PIO_INSTR_MEM30_OFFSET _u(0x000000c0) +#define PIO_INSTR_MEM30_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM30_RESET _u(0x00000000) +#define PIO_INSTR_MEM30_MSB _u(15) +#define PIO_INSTR_MEM30_LSB _u(0) +#define PIO_INSTR_MEM30_ACCESS "WO" +// ============================================================================= +// Register : PIO_INSTR_MEM31 +// Description : Write-only access to instruction memory location 31 +#define PIO_INSTR_MEM31_OFFSET _u(0x000000c4) +#define PIO_INSTR_MEM31_BITS _u(0x0000ffff) +#define PIO_INSTR_MEM31_RESET _u(0x00000000) +#define PIO_INSTR_MEM31_MSB _u(15) +#define PIO_INSTR_MEM31_LSB _u(0) +#define PIO_INSTR_MEM31_ACCESS "WO" +// ============================================================================= +// Register : PIO_SM0_CLKDIV +// Description : Clock divisor register for state machine 0 +// Frequency = clock freq / (CLKDIV_INT + CLKDIV_FRAC / 256) +#define PIO_SM0_CLKDIV_OFFSET _u(0x000000c8) +#define PIO_SM0_CLKDIV_BITS _u(0xffffff00) +#define PIO_SM0_CLKDIV_RESET _u(0x00010000) +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_CLKDIV_INT +// Description : Effective frequency is sysclk/(int + frac/256). +// Value of 0 is interpreted as 65536. If INT is 0, FRAC must also +// be 0. +#define PIO_SM0_CLKDIV_INT_RESET _u(0x0001) +#define PIO_SM0_CLKDIV_INT_BITS _u(0xffff0000) +#define PIO_SM0_CLKDIV_INT_MSB _u(31) +#define PIO_SM0_CLKDIV_INT_LSB _u(16) +#define PIO_SM0_CLKDIV_INT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_CLKDIV_FRAC +// Description : Fractional part of clock divisor +#define PIO_SM0_CLKDIV_FRAC_RESET _u(0x00) +#define PIO_SM0_CLKDIV_FRAC_BITS _u(0x0000ff00) +#define PIO_SM0_CLKDIV_FRAC_MSB _u(15) +#define PIO_SM0_CLKDIV_FRAC_LSB _u(8) +#define PIO_SM0_CLKDIV_FRAC_ACCESS "RW" +// ============================================================================= +// Register : PIO_SM0_EXECCTRL +// Description : Execution/behavioural settings for state machine 0 +#define PIO_SM0_EXECCTRL_OFFSET _u(0x000000cc) +#define PIO_SM0_EXECCTRL_BITS _u(0xffffff9f) +#define PIO_SM0_EXECCTRL_RESET _u(0x0001f000) +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_EXECCTRL_EXEC_STALLED +// Description : If 1, an instruction written to SMx_INSTR is stalled, and +// latched by the state machine. Will clear to 0 once this +// instruction completes. +#define PIO_SM0_EXECCTRL_EXEC_STALLED_RESET _u(0x0) +#define PIO_SM0_EXECCTRL_EXEC_STALLED_BITS _u(0x80000000) +#define PIO_SM0_EXECCTRL_EXEC_STALLED_MSB _u(31) +#define PIO_SM0_EXECCTRL_EXEC_STALLED_LSB _u(31) +#define PIO_SM0_EXECCTRL_EXEC_STALLED_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_EXECCTRL_SIDE_EN +// Description : If 1, the MSB of the Delay/Side-set instruction field is used +// as side-set enable, rather than a side-set data bit. This +// allows instructions to perform side-set optionally, rather than +// on every instruction, but the maximum possible side-set width +// is reduced from 5 to 4. Note that the value of +// PINCTRL_SIDESET_COUNT is inclusive of this enable bit. +#define PIO_SM0_EXECCTRL_SIDE_EN_RESET _u(0x0) +#define PIO_SM0_EXECCTRL_SIDE_EN_BITS _u(0x40000000) +#define PIO_SM0_EXECCTRL_SIDE_EN_MSB _u(30) +#define PIO_SM0_EXECCTRL_SIDE_EN_LSB _u(30) +#define PIO_SM0_EXECCTRL_SIDE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_EXECCTRL_SIDE_PINDIR +// Description : If 1, side-set data is asserted to pin directions, instead of +// pin values +#define PIO_SM0_EXECCTRL_SIDE_PINDIR_RESET _u(0x0) +#define PIO_SM0_EXECCTRL_SIDE_PINDIR_BITS _u(0x20000000) +#define PIO_SM0_EXECCTRL_SIDE_PINDIR_MSB _u(29) +#define PIO_SM0_EXECCTRL_SIDE_PINDIR_LSB _u(29) +#define PIO_SM0_EXECCTRL_SIDE_PINDIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_EXECCTRL_JMP_PIN +// Description : The GPIO number to use as condition for JMP PIN. Unaffected by +// input mapping. +#define PIO_SM0_EXECCTRL_JMP_PIN_RESET _u(0x00) +#define PIO_SM0_EXECCTRL_JMP_PIN_BITS _u(0x1f000000) +#define PIO_SM0_EXECCTRL_JMP_PIN_MSB _u(28) +#define PIO_SM0_EXECCTRL_JMP_PIN_LSB _u(24) +#define PIO_SM0_EXECCTRL_JMP_PIN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_EXECCTRL_OUT_EN_SEL +// Description : Which data bit to use for inline OUT enable +#define PIO_SM0_EXECCTRL_OUT_EN_SEL_RESET _u(0x00) +#define PIO_SM0_EXECCTRL_OUT_EN_SEL_BITS _u(0x00f80000) +#define PIO_SM0_EXECCTRL_OUT_EN_SEL_MSB _u(23) +#define PIO_SM0_EXECCTRL_OUT_EN_SEL_LSB _u(19) +#define PIO_SM0_EXECCTRL_OUT_EN_SEL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_EXECCTRL_INLINE_OUT_EN +// Description : If 1, use a bit of OUT data as an auxiliary write enable +// When used in conjunction with OUT_STICKY, writes with an enable +// of 0 will +// deassert the latest pin write. This can create useful +// masking/override behaviour +// due to the priority ordering of state machine pin writes (SM0 < +// SM1 < ...) +#define PIO_SM0_EXECCTRL_INLINE_OUT_EN_RESET _u(0x0) +#define PIO_SM0_EXECCTRL_INLINE_OUT_EN_BITS _u(0x00040000) +#define PIO_SM0_EXECCTRL_INLINE_OUT_EN_MSB _u(18) +#define PIO_SM0_EXECCTRL_INLINE_OUT_EN_LSB _u(18) +#define PIO_SM0_EXECCTRL_INLINE_OUT_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_EXECCTRL_OUT_STICKY +// Description : Continuously assert the most recent OUT/SET to the pins +#define PIO_SM0_EXECCTRL_OUT_STICKY_RESET _u(0x0) +#define PIO_SM0_EXECCTRL_OUT_STICKY_BITS _u(0x00020000) +#define PIO_SM0_EXECCTRL_OUT_STICKY_MSB _u(17) +#define PIO_SM0_EXECCTRL_OUT_STICKY_LSB _u(17) +#define PIO_SM0_EXECCTRL_OUT_STICKY_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_EXECCTRL_WRAP_TOP +// Description : After reaching this address, execution is wrapped to +// wrap_bottom. +// If the instruction is a jump, and the jump condition is true, +// the jump takes priority. +#define PIO_SM0_EXECCTRL_WRAP_TOP_RESET _u(0x1f) +#define PIO_SM0_EXECCTRL_WRAP_TOP_BITS _u(0x0001f000) +#define PIO_SM0_EXECCTRL_WRAP_TOP_MSB _u(16) +#define PIO_SM0_EXECCTRL_WRAP_TOP_LSB _u(12) +#define PIO_SM0_EXECCTRL_WRAP_TOP_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_EXECCTRL_WRAP_BOTTOM +// Description : After reaching wrap_top, execution is wrapped to this address. +#define PIO_SM0_EXECCTRL_WRAP_BOTTOM_RESET _u(0x00) +#define PIO_SM0_EXECCTRL_WRAP_BOTTOM_BITS _u(0x00000f80) +#define PIO_SM0_EXECCTRL_WRAP_BOTTOM_MSB _u(11) +#define PIO_SM0_EXECCTRL_WRAP_BOTTOM_LSB _u(7) +#define PIO_SM0_EXECCTRL_WRAP_BOTTOM_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_EXECCTRL_STATUS_SEL +// Description : Comparison used for the MOV x, STATUS instruction. +// 0x0 -> All-ones if TX FIFO level < N, otherwise all-zeroes +// 0x1 -> All-ones if RX FIFO level < N, otherwise all-zeroes +#define PIO_SM0_EXECCTRL_STATUS_SEL_RESET _u(0x0) +#define PIO_SM0_EXECCTRL_STATUS_SEL_BITS _u(0x00000010) +#define PIO_SM0_EXECCTRL_STATUS_SEL_MSB _u(4) +#define PIO_SM0_EXECCTRL_STATUS_SEL_LSB _u(4) +#define PIO_SM0_EXECCTRL_STATUS_SEL_ACCESS "RW" +#define PIO_SM0_EXECCTRL_STATUS_SEL_VALUE_TXLEVEL _u(0x0) +#define PIO_SM0_EXECCTRL_STATUS_SEL_VALUE_RXLEVEL _u(0x1) +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_EXECCTRL_STATUS_N +// Description : Comparison level for the MOV x, STATUS instruction +#define PIO_SM0_EXECCTRL_STATUS_N_RESET _u(0x0) +#define PIO_SM0_EXECCTRL_STATUS_N_BITS _u(0x0000000f) +#define PIO_SM0_EXECCTRL_STATUS_N_MSB _u(3) +#define PIO_SM0_EXECCTRL_STATUS_N_LSB _u(0) +#define PIO_SM0_EXECCTRL_STATUS_N_ACCESS "RW" +// ============================================================================= +// Register : PIO_SM0_SHIFTCTRL +// Description : Control behaviour of the input/output shift registers for state +// machine 0 +#define PIO_SM0_SHIFTCTRL_OFFSET _u(0x000000d0) +#define PIO_SM0_SHIFTCTRL_BITS _u(0xffff0000) +#define PIO_SM0_SHIFTCTRL_RESET _u(0x000c0000) +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_SHIFTCTRL_FJOIN_RX +// Description : When 1, RX FIFO steals the TX FIFO's storage, and becomes twice +// as deep. +// TX FIFO is disabled as a result (always reads as both full and +// empty). +// FIFOs are flushed when this bit is changed. +#define PIO_SM0_SHIFTCTRL_FJOIN_RX_RESET _u(0x0) +#define PIO_SM0_SHIFTCTRL_FJOIN_RX_BITS _u(0x80000000) +#define PIO_SM0_SHIFTCTRL_FJOIN_RX_MSB _u(31) +#define PIO_SM0_SHIFTCTRL_FJOIN_RX_LSB _u(31) +#define PIO_SM0_SHIFTCTRL_FJOIN_RX_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_SHIFTCTRL_FJOIN_TX +// Description : When 1, TX FIFO steals the RX FIFO's storage, and becomes twice +// as deep. +// RX FIFO is disabled as a result (always reads as both full and +// empty). +// FIFOs are flushed when this bit is changed. +#define PIO_SM0_SHIFTCTRL_FJOIN_TX_RESET _u(0x0) +#define PIO_SM0_SHIFTCTRL_FJOIN_TX_BITS _u(0x40000000) +#define PIO_SM0_SHIFTCTRL_FJOIN_TX_MSB _u(30) +#define PIO_SM0_SHIFTCTRL_FJOIN_TX_LSB _u(30) +#define PIO_SM0_SHIFTCTRL_FJOIN_TX_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_SHIFTCTRL_PULL_THRESH +// Description : Number of bits shifted out of OSR before autopull, or +// conditional pull (PULL IFEMPTY), will take place. +// Write 0 for value of 32. +#define PIO_SM0_SHIFTCTRL_PULL_THRESH_RESET _u(0x00) +#define PIO_SM0_SHIFTCTRL_PULL_THRESH_BITS _u(0x3e000000) +#define PIO_SM0_SHIFTCTRL_PULL_THRESH_MSB _u(29) +#define PIO_SM0_SHIFTCTRL_PULL_THRESH_LSB _u(25) +#define PIO_SM0_SHIFTCTRL_PULL_THRESH_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_SHIFTCTRL_PUSH_THRESH +// Description : Number of bits shifted into ISR before autopush, or conditional +// push (PUSH IFFULL), will take place. +// Write 0 for value of 32. +#define PIO_SM0_SHIFTCTRL_PUSH_THRESH_RESET _u(0x00) +#define PIO_SM0_SHIFTCTRL_PUSH_THRESH_BITS _u(0x01f00000) +#define PIO_SM0_SHIFTCTRL_PUSH_THRESH_MSB _u(24) +#define PIO_SM0_SHIFTCTRL_PUSH_THRESH_LSB _u(20) +#define PIO_SM0_SHIFTCTRL_PUSH_THRESH_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_SHIFTCTRL_OUT_SHIFTDIR +// Description : 1 = shift out of output shift register to right. 0 = to left. +#define PIO_SM0_SHIFTCTRL_OUT_SHIFTDIR_RESET _u(0x1) +#define PIO_SM0_SHIFTCTRL_OUT_SHIFTDIR_BITS _u(0x00080000) +#define PIO_SM0_SHIFTCTRL_OUT_SHIFTDIR_MSB _u(19) +#define PIO_SM0_SHIFTCTRL_OUT_SHIFTDIR_LSB _u(19) +#define PIO_SM0_SHIFTCTRL_OUT_SHIFTDIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_SHIFTCTRL_IN_SHIFTDIR +// Description : 1 = shift input shift register to right (data enters from +// left). 0 = to left. +#define PIO_SM0_SHIFTCTRL_IN_SHIFTDIR_RESET _u(0x1) +#define PIO_SM0_SHIFTCTRL_IN_SHIFTDIR_BITS _u(0x00040000) +#define PIO_SM0_SHIFTCTRL_IN_SHIFTDIR_MSB _u(18) +#define PIO_SM0_SHIFTCTRL_IN_SHIFTDIR_LSB _u(18) +#define PIO_SM0_SHIFTCTRL_IN_SHIFTDIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_SHIFTCTRL_AUTOPULL +// Description : Pull automatically when the output shift register is emptied, +// i.e. on or following an OUT instruction which causes the output +// shift counter to reach or exceed PULL_THRESH. +#define PIO_SM0_SHIFTCTRL_AUTOPULL_RESET _u(0x0) +#define PIO_SM0_SHIFTCTRL_AUTOPULL_BITS _u(0x00020000) +#define PIO_SM0_SHIFTCTRL_AUTOPULL_MSB _u(17) +#define PIO_SM0_SHIFTCTRL_AUTOPULL_LSB _u(17) +#define PIO_SM0_SHIFTCTRL_AUTOPULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_SHIFTCTRL_AUTOPUSH +// Description : Push automatically when the input shift register is filled, +// i.e. on an IN instruction which causes the input shift counter +// to reach or exceed PUSH_THRESH. +#define PIO_SM0_SHIFTCTRL_AUTOPUSH_RESET _u(0x0) +#define PIO_SM0_SHIFTCTRL_AUTOPUSH_BITS _u(0x00010000) +#define PIO_SM0_SHIFTCTRL_AUTOPUSH_MSB _u(16) +#define PIO_SM0_SHIFTCTRL_AUTOPUSH_LSB _u(16) +#define PIO_SM0_SHIFTCTRL_AUTOPUSH_ACCESS "RW" +// ============================================================================= +// Register : PIO_SM0_ADDR +// Description : Current instruction address of state machine 0 +#define PIO_SM0_ADDR_OFFSET _u(0x000000d4) +#define PIO_SM0_ADDR_BITS _u(0x0000001f) +#define PIO_SM0_ADDR_RESET _u(0x00000000) +#define PIO_SM0_ADDR_MSB _u(4) +#define PIO_SM0_ADDR_LSB _u(0) +#define PIO_SM0_ADDR_ACCESS "RO" +// ============================================================================= +// Register : PIO_SM0_INSTR +// Description : Read to see the instruction currently addressed by state +// machine 0's program counter +// Write to execute an instruction immediately (including jumps) +// and then resume execution. +#define PIO_SM0_INSTR_OFFSET _u(0x000000d8) +#define PIO_SM0_INSTR_BITS _u(0x0000ffff) +#define PIO_SM0_INSTR_RESET "-" +#define PIO_SM0_INSTR_MSB _u(15) +#define PIO_SM0_INSTR_LSB _u(0) +#define PIO_SM0_INSTR_ACCESS "RW" +// ============================================================================= +// Register : PIO_SM0_PINCTRL +// Description : State machine pin control +#define PIO_SM0_PINCTRL_OFFSET _u(0x000000dc) +#define PIO_SM0_PINCTRL_BITS _u(0xffffffff) +#define PIO_SM0_PINCTRL_RESET _u(0x14000000) +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_PINCTRL_SIDESET_COUNT +// Description : The number of MSBs of the Delay/Side-set instruction field +// which are used for side-set. Inclusive of the enable bit, if +// present. Minimum of 0 (all delay bits, no side-set) and maximum +// of 5 (all side-set, no delay). +#define PIO_SM0_PINCTRL_SIDESET_COUNT_RESET _u(0x0) +#define PIO_SM0_PINCTRL_SIDESET_COUNT_BITS _u(0xe0000000) +#define PIO_SM0_PINCTRL_SIDESET_COUNT_MSB _u(31) +#define PIO_SM0_PINCTRL_SIDESET_COUNT_LSB _u(29) +#define PIO_SM0_PINCTRL_SIDESET_COUNT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_PINCTRL_SET_COUNT +// Description : The number of pins asserted by a SET. In the range 0 to 5 +// inclusive. +#define PIO_SM0_PINCTRL_SET_COUNT_RESET _u(0x5) +#define PIO_SM0_PINCTRL_SET_COUNT_BITS _u(0x1c000000) +#define PIO_SM0_PINCTRL_SET_COUNT_MSB _u(28) +#define PIO_SM0_PINCTRL_SET_COUNT_LSB _u(26) +#define PIO_SM0_PINCTRL_SET_COUNT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_PINCTRL_OUT_COUNT +// Description : The number of pins asserted by an OUT PINS, OUT PINDIRS or MOV +// PINS instruction. In the range 0 to 32 inclusive. +#define PIO_SM0_PINCTRL_OUT_COUNT_RESET _u(0x00) +#define PIO_SM0_PINCTRL_OUT_COUNT_BITS _u(0x03f00000) +#define PIO_SM0_PINCTRL_OUT_COUNT_MSB _u(25) +#define PIO_SM0_PINCTRL_OUT_COUNT_LSB _u(20) +#define PIO_SM0_PINCTRL_OUT_COUNT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_PINCTRL_IN_BASE +// Description : The pin which is mapped to the least-significant bit of a state +// machine's IN data bus. Higher-numbered pins are mapped to +// consecutively more-significant data bits, with a modulo of 32 +// applied to pin number. +#define PIO_SM0_PINCTRL_IN_BASE_RESET _u(0x00) +#define PIO_SM0_PINCTRL_IN_BASE_BITS _u(0x000f8000) +#define PIO_SM0_PINCTRL_IN_BASE_MSB _u(19) +#define PIO_SM0_PINCTRL_IN_BASE_LSB _u(15) +#define PIO_SM0_PINCTRL_IN_BASE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_PINCTRL_SIDESET_BASE +// Description : The lowest-numbered pin that will be affected by a side-set +// operation. The MSBs of an instruction's side-set/delay field +// (up to 5, determined by SIDESET_COUNT) are used for side-set +// data, with the remaining LSBs used for delay. The +// least-significant bit of the side-set portion is the bit +// written to this pin, with more-significant bits written to +// higher-numbered pins. +#define PIO_SM0_PINCTRL_SIDESET_BASE_RESET _u(0x00) +#define PIO_SM0_PINCTRL_SIDESET_BASE_BITS _u(0x00007c00) +#define PIO_SM0_PINCTRL_SIDESET_BASE_MSB _u(14) +#define PIO_SM0_PINCTRL_SIDESET_BASE_LSB _u(10) +#define PIO_SM0_PINCTRL_SIDESET_BASE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_PINCTRL_SET_BASE +// Description : The lowest-numbered pin that will be affected by a SET PINS or +// SET PINDIRS instruction. The data written to this pin is the +// least-significant bit of the SET data. +#define PIO_SM0_PINCTRL_SET_BASE_RESET _u(0x00) +#define PIO_SM0_PINCTRL_SET_BASE_BITS _u(0x000003e0) +#define PIO_SM0_PINCTRL_SET_BASE_MSB _u(9) +#define PIO_SM0_PINCTRL_SET_BASE_LSB _u(5) +#define PIO_SM0_PINCTRL_SET_BASE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM0_PINCTRL_OUT_BASE +// Description : The lowest-numbered pin that will be affected by an OUT PINS, +// OUT PINDIRS or MOV PINS instruction. The data written to this +// pin will always be the least-significant bit of the OUT or MOV +// data. +#define PIO_SM0_PINCTRL_OUT_BASE_RESET _u(0x00) +#define PIO_SM0_PINCTRL_OUT_BASE_BITS _u(0x0000001f) +#define PIO_SM0_PINCTRL_OUT_BASE_MSB _u(4) +#define PIO_SM0_PINCTRL_OUT_BASE_LSB _u(0) +#define PIO_SM0_PINCTRL_OUT_BASE_ACCESS "RW" +// ============================================================================= +// Register : PIO_SM1_CLKDIV +// Description : Clock divisor register for state machine 1 +// Frequency = clock freq / (CLKDIV_INT + CLKDIV_FRAC / 256) +#define PIO_SM1_CLKDIV_OFFSET _u(0x000000e0) +#define PIO_SM1_CLKDIV_BITS _u(0xffffff00) +#define PIO_SM1_CLKDIV_RESET _u(0x00010000) +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_CLKDIV_INT +// Description : Effective frequency is sysclk/(int + frac/256). +// Value of 0 is interpreted as 65536. If INT is 0, FRAC must also +// be 0. +#define PIO_SM1_CLKDIV_INT_RESET _u(0x0001) +#define PIO_SM1_CLKDIV_INT_BITS _u(0xffff0000) +#define PIO_SM1_CLKDIV_INT_MSB _u(31) +#define PIO_SM1_CLKDIV_INT_LSB _u(16) +#define PIO_SM1_CLKDIV_INT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_CLKDIV_FRAC +// Description : Fractional part of clock divisor +#define PIO_SM1_CLKDIV_FRAC_RESET _u(0x00) +#define PIO_SM1_CLKDIV_FRAC_BITS _u(0x0000ff00) +#define PIO_SM1_CLKDIV_FRAC_MSB _u(15) +#define PIO_SM1_CLKDIV_FRAC_LSB _u(8) +#define PIO_SM1_CLKDIV_FRAC_ACCESS "RW" +// ============================================================================= +// Register : PIO_SM1_EXECCTRL +// Description : Execution/behavioural settings for state machine 1 +#define PIO_SM1_EXECCTRL_OFFSET _u(0x000000e4) +#define PIO_SM1_EXECCTRL_BITS _u(0xffffff9f) +#define PIO_SM1_EXECCTRL_RESET _u(0x0001f000) +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_EXECCTRL_EXEC_STALLED +// Description : If 1, an instruction written to SMx_INSTR is stalled, and +// latched by the state machine. Will clear to 0 once this +// instruction completes. +#define PIO_SM1_EXECCTRL_EXEC_STALLED_RESET _u(0x0) +#define PIO_SM1_EXECCTRL_EXEC_STALLED_BITS _u(0x80000000) +#define PIO_SM1_EXECCTRL_EXEC_STALLED_MSB _u(31) +#define PIO_SM1_EXECCTRL_EXEC_STALLED_LSB _u(31) +#define PIO_SM1_EXECCTRL_EXEC_STALLED_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_EXECCTRL_SIDE_EN +// Description : If 1, the MSB of the Delay/Side-set instruction field is used +// as side-set enable, rather than a side-set data bit. This +// allows instructions to perform side-set optionally, rather than +// on every instruction, but the maximum possible side-set width +// is reduced from 5 to 4. Note that the value of +// PINCTRL_SIDESET_COUNT is inclusive of this enable bit. +#define PIO_SM1_EXECCTRL_SIDE_EN_RESET _u(0x0) +#define PIO_SM1_EXECCTRL_SIDE_EN_BITS _u(0x40000000) +#define PIO_SM1_EXECCTRL_SIDE_EN_MSB _u(30) +#define PIO_SM1_EXECCTRL_SIDE_EN_LSB _u(30) +#define PIO_SM1_EXECCTRL_SIDE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_EXECCTRL_SIDE_PINDIR +// Description : If 1, side-set data is asserted to pin directions, instead of +// pin values +#define PIO_SM1_EXECCTRL_SIDE_PINDIR_RESET _u(0x0) +#define PIO_SM1_EXECCTRL_SIDE_PINDIR_BITS _u(0x20000000) +#define PIO_SM1_EXECCTRL_SIDE_PINDIR_MSB _u(29) +#define PIO_SM1_EXECCTRL_SIDE_PINDIR_LSB _u(29) +#define PIO_SM1_EXECCTRL_SIDE_PINDIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_EXECCTRL_JMP_PIN +// Description : The GPIO number to use as condition for JMP PIN. Unaffected by +// input mapping. +#define PIO_SM1_EXECCTRL_JMP_PIN_RESET _u(0x00) +#define PIO_SM1_EXECCTRL_JMP_PIN_BITS _u(0x1f000000) +#define PIO_SM1_EXECCTRL_JMP_PIN_MSB _u(28) +#define PIO_SM1_EXECCTRL_JMP_PIN_LSB _u(24) +#define PIO_SM1_EXECCTRL_JMP_PIN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_EXECCTRL_OUT_EN_SEL +// Description : Which data bit to use for inline OUT enable +#define PIO_SM1_EXECCTRL_OUT_EN_SEL_RESET _u(0x00) +#define PIO_SM1_EXECCTRL_OUT_EN_SEL_BITS _u(0x00f80000) +#define PIO_SM1_EXECCTRL_OUT_EN_SEL_MSB _u(23) +#define PIO_SM1_EXECCTRL_OUT_EN_SEL_LSB _u(19) +#define PIO_SM1_EXECCTRL_OUT_EN_SEL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_EXECCTRL_INLINE_OUT_EN +// Description : If 1, use a bit of OUT data as an auxiliary write enable +// When used in conjunction with OUT_STICKY, writes with an enable +// of 0 will +// deassert the latest pin write. This can create useful +// masking/override behaviour +// due to the priority ordering of state machine pin writes (SM0 < +// SM1 < ...) +#define PIO_SM1_EXECCTRL_INLINE_OUT_EN_RESET _u(0x0) +#define PIO_SM1_EXECCTRL_INLINE_OUT_EN_BITS _u(0x00040000) +#define PIO_SM1_EXECCTRL_INLINE_OUT_EN_MSB _u(18) +#define PIO_SM1_EXECCTRL_INLINE_OUT_EN_LSB _u(18) +#define PIO_SM1_EXECCTRL_INLINE_OUT_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_EXECCTRL_OUT_STICKY +// Description : Continuously assert the most recent OUT/SET to the pins +#define PIO_SM1_EXECCTRL_OUT_STICKY_RESET _u(0x0) +#define PIO_SM1_EXECCTRL_OUT_STICKY_BITS _u(0x00020000) +#define PIO_SM1_EXECCTRL_OUT_STICKY_MSB _u(17) +#define PIO_SM1_EXECCTRL_OUT_STICKY_LSB _u(17) +#define PIO_SM1_EXECCTRL_OUT_STICKY_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_EXECCTRL_WRAP_TOP +// Description : After reaching this address, execution is wrapped to +// wrap_bottom. +// If the instruction is a jump, and the jump condition is true, +// the jump takes priority. +#define PIO_SM1_EXECCTRL_WRAP_TOP_RESET _u(0x1f) +#define PIO_SM1_EXECCTRL_WRAP_TOP_BITS _u(0x0001f000) +#define PIO_SM1_EXECCTRL_WRAP_TOP_MSB _u(16) +#define PIO_SM1_EXECCTRL_WRAP_TOP_LSB _u(12) +#define PIO_SM1_EXECCTRL_WRAP_TOP_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_EXECCTRL_WRAP_BOTTOM +// Description : After reaching wrap_top, execution is wrapped to this address. +#define PIO_SM1_EXECCTRL_WRAP_BOTTOM_RESET _u(0x00) +#define PIO_SM1_EXECCTRL_WRAP_BOTTOM_BITS _u(0x00000f80) +#define PIO_SM1_EXECCTRL_WRAP_BOTTOM_MSB _u(11) +#define PIO_SM1_EXECCTRL_WRAP_BOTTOM_LSB _u(7) +#define PIO_SM1_EXECCTRL_WRAP_BOTTOM_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_EXECCTRL_STATUS_SEL +// Description : Comparison used for the MOV x, STATUS instruction. +// 0x0 -> All-ones if TX FIFO level < N, otherwise all-zeroes +// 0x1 -> All-ones if RX FIFO level < N, otherwise all-zeroes +#define PIO_SM1_EXECCTRL_STATUS_SEL_RESET _u(0x0) +#define PIO_SM1_EXECCTRL_STATUS_SEL_BITS _u(0x00000010) +#define PIO_SM1_EXECCTRL_STATUS_SEL_MSB _u(4) +#define PIO_SM1_EXECCTRL_STATUS_SEL_LSB _u(4) +#define PIO_SM1_EXECCTRL_STATUS_SEL_ACCESS "RW" +#define PIO_SM1_EXECCTRL_STATUS_SEL_VALUE_TXLEVEL _u(0x0) +#define PIO_SM1_EXECCTRL_STATUS_SEL_VALUE_RXLEVEL _u(0x1) +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_EXECCTRL_STATUS_N +// Description : Comparison level for the MOV x, STATUS instruction +#define PIO_SM1_EXECCTRL_STATUS_N_RESET _u(0x0) +#define PIO_SM1_EXECCTRL_STATUS_N_BITS _u(0x0000000f) +#define PIO_SM1_EXECCTRL_STATUS_N_MSB _u(3) +#define PIO_SM1_EXECCTRL_STATUS_N_LSB _u(0) +#define PIO_SM1_EXECCTRL_STATUS_N_ACCESS "RW" +// ============================================================================= +// Register : PIO_SM1_SHIFTCTRL +// Description : Control behaviour of the input/output shift registers for state +// machine 1 +#define PIO_SM1_SHIFTCTRL_OFFSET _u(0x000000e8) +#define PIO_SM1_SHIFTCTRL_BITS _u(0xffff0000) +#define PIO_SM1_SHIFTCTRL_RESET _u(0x000c0000) +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_SHIFTCTRL_FJOIN_RX +// Description : When 1, RX FIFO steals the TX FIFO's storage, and becomes twice +// as deep. +// TX FIFO is disabled as a result (always reads as both full and +// empty). +// FIFOs are flushed when this bit is changed. +#define PIO_SM1_SHIFTCTRL_FJOIN_RX_RESET _u(0x0) +#define PIO_SM1_SHIFTCTRL_FJOIN_RX_BITS _u(0x80000000) +#define PIO_SM1_SHIFTCTRL_FJOIN_RX_MSB _u(31) +#define PIO_SM1_SHIFTCTRL_FJOIN_RX_LSB _u(31) +#define PIO_SM1_SHIFTCTRL_FJOIN_RX_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_SHIFTCTRL_FJOIN_TX +// Description : When 1, TX FIFO steals the RX FIFO's storage, and becomes twice +// as deep. +// RX FIFO is disabled as a result (always reads as both full and +// empty). +// FIFOs are flushed when this bit is changed. +#define PIO_SM1_SHIFTCTRL_FJOIN_TX_RESET _u(0x0) +#define PIO_SM1_SHIFTCTRL_FJOIN_TX_BITS _u(0x40000000) +#define PIO_SM1_SHIFTCTRL_FJOIN_TX_MSB _u(30) +#define PIO_SM1_SHIFTCTRL_FJOIN_TX_LSB _u(30) +#define PIO_SM1_SHIFTCTRL_FJOIN_TX_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_SHIFTCTRL_PULL_THRESH +// Description : Number of bits shifted out of OSR before autopull, or +// conditional pull (PULL IFEMPTY), will take place. +// Write 0 for value of 32. +#define PIO_SM1_SHIFTCTRL_PULL_THRESH_RESET _u(0x00) +#define PIO_SM1_SHIFTCTRL_PULL_THRESH_BITS _u(0x3e000000) +#define PIO_SM1_SHIFTCTRL_PULL_THRESH_MSB _u(29) +#define PIO_SM1_SHIFTCTRL_PULL_THRESH_LSB _u(25) +#define PIO_SM1_SHIFTCTRL_PULL_THRESH_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_SHIFTCTRL_PUSH_THRESH +// Description : Number of bits shifted into ISR before autopush, or conditional +// push (PUSH IFFULL), will take place. +// Write 0 for value of 32. +#define PIO_SM1_SHIFTCTRL_PUSH_THRESH_RESET _u(0x00) +#define PIO_SM1_SHIFTCTRL_PUSH_THRESH_BITS _u(0x01f00000) +#define PIO_SM1_SHIFTCTRL_PUSH_THRESH_MSB _u(24) +#define PIO_SM1_SHIFTCTRL_PUSH_THRESH_LSB _u(20) +#define PIO_SM1_SHIFTCTRL_PUSH_THRESH_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_SHIFTCTRL_OUT_SHIFTDIR +// Description : 1 = shift out of output shift register to right. 0 = to left. +#define PIO_SM1_SHIFTCTRL_OUT_SHIFTDIR_RESET _u(0x1) +#define PIO_SM1_SHIFTCTRL_OUT_SHIFTDIR_BITS _u(0x00080000) +#define PIO_SM1_SHIFTCTRL_OUT_SHIFTDIR_MSB _u(19) +#define PIO_SM1_SHIFTCTRL_OUT_SHIFTDIR_LSB _u(19) +#define PIO_SM1_SHIFTCTRL_OUT_SHIFTDIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_SHIFTCTRL_IN_SHIFTDIR +// Description : 1 = shift input shift register to right (data enters from +// left). 0 = to left. +#define PIO_SM1_SHIFTCTRL_IN_SHIFTDIR_RESET _u(0x1) +#define PIO_SM1_SHIFTCTRL_IN_SHIFTDIR_BITS _u(0x00040000) +#define PIO_SM1_SHIFTCTRL_IN_SHIFTDIR_MSB _u(18) +#define PIO_SM1_SHIFTCTRL_IN_SHIFTDIR_LSB _u(18) +#define PIO_SM1_SHIFTCTRL_IN_SHIFTDIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_SHIFTCTRL_AUTOPULL +// Description : Pull automatically when the output shift register is emptied, +// i.e. on or following an OUT instruction which causes the output +// shift counter to reach or exceed PULL_THRESH. +#define PIO_SM1_SHIFTCTRL_AUTOPULL_RESET _u(0x0) +#define PIO_SM1_SHIFTCTRL_AUTOPULL_BITS _u(0x00020000) +#define PIO_SM1_SHIFTCTRL_AUTOPULL_MSB _u(17) +#define PIO_SM1_SHIFTCTRL_AUTOPULL_LSB _u(17) +#define PIO_SM1_SHIFTCTRL_AUTOPULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_SHIFTCTRL_AUTOPUSH +// Description : Push automatically when the input shift register is filled, +// i.e. on an IN instruction which causes the input shift counter +// to reach or exceed PUSH_THRESH. +#define PIO_SM1_SHIFTCTRL_AUTOPUSH_RESET _u(0x0) +#define PIO_SM1_SHIFTCTRL_AUTOPUSH_BITS _u(0x00010000) +#define PIO_SM1_SHIFTCTRL_AUTOPUSH_MSB _u(16) +#define PIO_SM1_SHIFTCTRL_AUTOPUSH_LSB _u(16) +#define PIO_SM1_SHIFTCTRL_AUTOPUSH_ACCESS "RW" +// ============================================================================= +// Register : PIO_SM1_ADDR +// Description : Current instruction address of state machine 1 +#define PIO_SM1_ADDR_OFFSET _u(0x000000ec) +#define PIO_SM1_ADDR_BITS _u(0x0000001f) +#define PIO_SM1_ADDR_RESET _u(0x00000000) +#define PIO_SM1_ADDR_MSB _u(4) +#define PIO_SM1_ADDR_LSB _u(0) +#define PIO_SM1_ADDR_ACCESS "RO" +// ============================================================================= +// Register : PIO_SM1_INSTR +// Description : Read to see the instruction currently addressed by state +// machine 1's program counter +// Write to execute an instruction immediately (including jumps) +// and then resume execution. +#define PIO_SM1_INSTR_OFFSET _u(0x000000f0) +#define PIO_SM1_INSTR_BITS _u(0x0000ffff) +#define PIO_SM1_INSTR_RESET "-" +#define PIO_SM1_INSTR_MSB _u(15) +#define PIO_SM1_INSTR_LSB _u(0) +#define PIO_SM1_INSTR_ACCESS "RW" +// ============================================================================= +// Register : PIO_SM1_PINCTRL +// Description : State machine pin control +#define PIO_SM1_PINCTRL_OFFSET _u(0x000000f4) +#define PIO_SM1_PINCTRL_BITS _u(0xffffffff) +#define PIO_SM1_PINCTRL_RESET _u(0x14000000) +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_PINCTRL_SIDESET_COUNT +// Description : The number of MSBs of the Delay/Side-set instruction field +// which are used for side-set. Inclusive of the enable bit, if +// present. Minimum of 0 (all delay bits, no side-set) and maximum +// of 5 (all side-set, no delay). +#define PIO_SM1_PINCTRL_SIDESET_COUNT_RESET _u(0x0) +#define PIO_SM1_PINCTRL_SIDESET_COUNT_BITS _u(0xe0000000) +#define PIO_SM1_PINCTRL_SIDESET_COUNT_MSB _u(31) +#define PIO_SM1_PINCTRL_SIDESET_COUNT_LSB _u(29) +#define PIO_SM1_PINCTRL_SIDESET_COUNT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_PINCTRL_SET_COUNT +// Description : The number of pins asserted by a SET. In the range 0 to 5 +// inclusive. +#define PIO_SM1_PINCTRL_SET_COUNT_RESET _u(0x5) +#define PIO_SM1_PINCTRL_SET_COUNT_BITS _u(0x1c000000) +#define PIO_SM1_PINCTRL_SET_COUNT_MSB _u(28) +#define PIO_SM1_PINCTRL_SET_COUNT_LSB _u(26) +#define PIO_SM1_PINCTRL_SET_COUNT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_PINCTRL_OUT_COUNT +// Description : The number of pins asserted by an OUT PINS, OUT PINDIRS or MOV +// PINS instruction. In the range 0 to 32 inclusive. +#define PIO_SM1_PINCTRL_OUT_COUNT_RESET _u(0x00) +#define PIO_SM1_PINCTRL_OUT_COUNT_BITS _u(0x03f00000) +#define PIO_SM1_PINCTRL_OUT_COUNT_MSB _u(25) +#define PIO_SM1_PINCTRL_OUT_COUNT_LSB _u(20) +#define PIO_SM1_PINCTRL_OUT_COUNT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_PINCTRL_IN_BASE +// Description : The pin which is mapped to the least-significant bit of a state +// machine's IN data bus. Higher-numbered pins are mapped to +// consecutively more-significant data bits, with a modulo of 32 +// applied to pin number. +#define PIO_SM1_PINCTRL_IN_BASE_RESET _u(0x00) +#define PIO_SM1_PINCTRL_IN_BASE_BITS _u(0x000f8000) +#define PIO_SM1_PINCTRL_IN_BASE_MSB _u(19) +#define PIO_SM1_PINCTRL_IN_BASE_LSB _u(15) +#define PIO_SM1_PINCTRL_IN_BASE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_PINCTRL_SIDESET_BASE +// Description : The lowest-numbered pin that will be affected by a side-set +// operation. The MSBs of an instruction's side-set/delay field +// (up to 5, determined by SIDESET_COUNT) are used for side-set +// data, with the remaining LSBs used for delay. The +// least-significant bit of the side-set portion is the bit +// written to this pin, with more-significant bits written to +// higher-numbered pins. +#define PIO_SM1_PINCTRL_SIDESET_BASE_RESET _u(0x00) +#define PIO_SM1_PINCTRL_SIDESET_BASE_BITS _u(0x00007c00) +#define PIO_SM1_PINCTRL_SIDESET_BASE_MSB _u(14) +#define PIO_SM1_PINCTRL_SIDESET_BASE_LSB _u(10) +#define PIO_SM1_PINCTRL_SIDESET_BASE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_PINCTRL_SET_BASE +// Description : The lowest-numbered pin that will be affected by a SET PINS or +// SET PINDIRS instruction. The data written to this pin is the +// least-significant bit of the SET data. +#define PIO_SM1_PINCTRL_SET_BASE_RESET _u(0x00) +#define PIO_SM1_PINCTRL_SET_BASE_BITS _u(0x000003e0) +#define PIO_SM1_PINCTRL_SET_BASE_MSB _u(9) +#define PIO_SM1_PINCTRL_SET_BASE_LSB _u(5) +#define PIO_SM1_PINCTRL_SET_BASE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM1_PINCTRL_OUT_BASE +// Description : The lowest-numbered pin that will be affected by an OUT PINS, +// OUT PINDIRS or MOV PINS instruction. The data written to this +// pin will always be the least-significant bit of the OUT or MOV +// data. +#define PIO_SM1_PINCTRL_OUT_BASE_RESET _u(0x00) +#define PIO_SM1_PINCTRL_OUT_BASE_BITS _u(0x0000001f) +#define PIO_SM1_PINCTRL_OUT_BASE_MSB _u(4) +#define PIO_SM1_PINCTRL_OUT_BASE_LSB _u(0) +#define PIO_SM1_PINCTRL_OUT_BASE_ACCESS "RW" +// ============================================================================= +// Register : PIO_SM2_CLKDIV +// Description : Clock divisor register for state machine 2 +// Frequency = clock freq / (CLKDIV_INT + CLKDIV_FRAC / 256) +#define PIO_SM2_CLKDIV_OFFSET _u(0x000000f8) +#define PIO_SM2_CLKDIV_BITS _u(0xffffff00) +#define PIO_SM2_CLKDIV_RESET _u(0x00010000) +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_CLKDIV_INT +// Description : Effective frequency is sysclk/(int + frac/256). +// Value of 0 is interpreted as 65536. If INT is 0, FRAC must also +// be 0. +#define PIO_SM2_CLKDIV_INT_RESET _u(0x0001) +#define PIO_SM2_CLKDIV_INT_BITS _u(0xffff0000) +#define PIO_SM2_CLKDIV_INT_MSB _u(31) +#define PIO_SM2_CLKDIV_INT_LSB _u(16) +#define PIO_SM2_CLKDIV_INT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_CLKDIV_FRAC +// Description : Fractional part of clock divisor +#define PIO_SM2_CLKDIV_FRAC_RESET _u(0x00) +#define PIO_SM2_CLKDIV_FRAC_BITS _u(0x0000ff00) +#define PIO_SM2_CLKDIV_FRAC_MSB _u(15) +#define PIO_SM2_CLKDIV_FRAC_LSB _u(8) +#define PIO_SM2_CLKDIV_FRAC_ACCESS "RW" +// ============================================================================= +// Register : PIO_SM2_EXECCTRL +// Description : Execution/behavioural settings for state machine 2 +#define PIO_SM2_EXECCTRL_OFFSET _u(0x000000fc) +#define PIO_SM2_EXECCTRL_BITS _u(0xffffff9f) +#define PIO_SM2_EXECCTRL_RESET _u(0x0001f000) +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_EXECCTRL_EXEC_STALLED +// Description : If 1, an instruction written to SMx_INSTR is stalled, and +// latched by the state machine. Will clear to 0 once this +// instruction completes. +#define PIO_SM2_EXECCTRL_EXEC_STALLED_RESET _u(0x0) +#define PIO_SM2_EXECCTRL_EXEC_STALLED_BITS _u(0x80000000) +#define PIO_SM2_EXECCTRL_EXEC_STALLED_MSB _u(31) +#define PIO_SM2_EXECCTRL_EXEC_STALLED_LSB _u(31) +#define PIO_SM2_EXECCTRL_EXEC_STALLED_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_EXECCTRL_SIDE_EN +// Description : If 1, the MSB of the Delay/Side-set instruction field is used +// as side-set enable, rather than a side-set data bit. This +// allows instructions to perform side-set optionally, rather than +// on every instruction, but the maximum possible side-set width +// is reduced from 5 to 4. Note that the value of +// PINCTRL_SIDESET_COUNT is inclusive of this enable bit. +#define PIO_SM2_EXECCTRL_SIDE_EN_RESET _u(0x0) +#define PIO_SM2_EXECCTRL_SIDE_EN_BITS _u(0x40000000) +#define PIO_SM2_EXECCTRL_SIDE_EN_MSB _u(30) +#define PIO_SM2_EXECCTRL_SIDE_EN_LSB _u(30) +#define PIO_SM2_EXECCTRL_SIDE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_EXECCTRL_SIDE_PINDIR +// Description : If 1, side-set data is asserted to pin directions, instead of +// pin values +#define PIO_SM2_EXECCTRL_SIDE_PINDIR_RESET _u(0x0) +#define PIO_SM2_EXECCTRL_SIDE_PINDIR_BITS _u(0x20000000) +#define PIO_SM2_EXECCTRL_SIDE_PINDIR_MSB _u(29) +#define PIO_SM2_EXECCTRL_SIDE_PINDIR_LSB _u(29) +#define PIO_SM2_EXECCTRL_SIDE_PINDIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_EXECCTRL_JMP_PIN +// Description : The GPIO number to use as condition for JMP PIN. Unaffected by +// input mapping. +#define PIO_SM2_EXECCTRL_JMP_PIN_RESET _u(0x00) +#define PIO_SM2_EXECCTRL_JMP_PIN_BITS _u(0x1f000000) +#define PIO_SM2_EXECCTRL_JMP_PIN_MSB _u(28) +#define PIO_SM2_EXECCTRL_JMP_PIN_LSB _u(24) +#define PIO_SM2_EXECCTRL_JMP_PIN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_EXECCTRL_OUT_EN_SEL +// Description : Which data bit to use for inline OUT enable +#define PIO_SM2_EXECCTRL_OUT_EN_SEL_RESET _u(0x00) +#define PIO_SM2_EXECCTRL_OUT_EN_SEL_BITS _u(0x00f80000) +#define PIO_SM2_EXECCTRL_OUT_EN_SEL_MSB _u(23) +#define PIO_SM2_EXECCTRL_OUT_EN_SEL_LSB _u(19) +#define PIO_SM2_EXECCTRL_OUT_EN_SEL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_EXECCTRL_INLINE_OUT_EN +// Description : If 1, use a bit of OUT data as an auxiliary write enable +// When used in conjunction with OUT_STICKY, writes with an enable +// of 0 will +// deassert the latest pin write. This can create useful +// masking/override behaviour +// due to the priority ordering of state machine pin writes (SM0 < +// SM1 < ...) +#define PIO_SM2_EXECCTRL_INLINE_OUT_EN_RESET _u(0x0) +#define PIO_SM2_EXECCTRL_INLINE_OUT_EN_BITS _u(0x00040000) +#define PIO_SM2_EXECCTRL_INLINE_OUT_EN_MSB _u(18) +#define PIO_SM2_EXECCTRL_INLINE_OUT_EN_LSB _u(18) +#define PIO_SM2_EXECCTRL_INLINE_OUT_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_EXECCTRL_OUT_STICKY +// Description : Continuously assert the most recent OUT/SET to the pins +#define PIO_SM2_EXECCTRL_OUT_STICKY_RESET _u(0x0) +#define PIO_SM2_EXECCTRL_OUT_STICKY_BITS _u(0x00020000) +#define PIO_SM2_EXECCTRL_OUT_STICKY_MSB _u(17) +#define PIO_SM2_EXECCTRL_OUT_STICKY_LSB _u(17) +#define PIO_SM2_EXECCTRL_OUT_STICKY_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_EXECCTRL_WRAP_TOP +// Description : After reaching this address, execution is wrapped to +// wrap_bottom. +// If the instruction is a jump, and the jump condition is true, +// the jump takes priority. +#define PIO_SM2_EXECCTRL_WRAP_TOP_RESET _u(0x1f) +#define PIO_SM2_EXECCTRL_WRAP_TOP_BITS _u(0x0001f000) +#define PIO_SM2_EXECCTRL_WRAP_TOP_MSB _u(16) +#define PIO_SM2_EXECCTRL_WRAP_TOP_LSB _u(12) +#define PIO_SM2_EXECCTRL_WRAP_TOP_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_EXECCTRL_WRAP_BOTTOM +// Description : After reaching wrap_top, execution is wrapped to this address. +#define PIO_SM2_EXECCTRL_WRAP_BOTTOM_RESET _u(0x00) +#define PIO_SM2_EXECCTRL_WRAP_BOTTOM_BITS _u(0x00000f80) +#define PIO_SM2_EXECCTRL_WRAP_BOTTOM_MSB _u(11) +#define PIO_SM2_EXECCTRL_WRAP_BOTTOM_LSB _u(7) +#define PIO_SM2_EXECCTRL_WRAP_BOTTOM_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_EXECCTRL_STATUS_SEL +// Description : Comparison used for the MOV x, STATUS instruction. +// 0x0 -> All-ones if TX FIFO level < N, otherwise all-zeroes +// 0x1 -> All-ones if RX FIFO level < N, otherwise all-zeroes +#define PIO_SM2_EXECCTRL_STATUS_SEL_RESET _u(0x0) +#define PIO_SM2_EXECCTRL_STATUS_SEL_BITS _u(0x00000010) +#define PIO_SM2_EXECCTRL_STATUS_SEL_MSB _u(4) +#define PIO_SM2_EXECCTRL_STATUS_SEL_LSB _u(4) +#define PIO_SM2_EXECCTRL_STATUS_SEL_ACCESS "RW" +#define PIO_SM2_EXECCTRL_STATUS_SEL_VALUE_TXLEVEL _u(0x0) +#define PIO_SM2_EXECCTRL_STATUS_SEL_VALUE_RXLEVEL _u(0x1) +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_EXECCTRL_STATUS_N +// Description : Comparison level for the MOV x, STATUS instruction +#define PIO_SM2_EXECCTRL_STATUS_N_RESET _u(0x0) +#define PIO_SM2_EXECCTRL_STATUS_N_BITS _u(0x0000000f) +#define PIO_SM2_EXECCTRL_STATUS_N_MSB _u(3) +#define PIO_SM2_EXECCTRL_STATUS_N_LSB _u(0) +#define PIO_SM2_EXECCTRL_STATUS_N_ACCESS "RW" +// ============================================================================= +// Register : PIO_SM2_SHIFTCTRL +// Description : Control behaviour of the input/output shift registers for state +// machine 2 +#define PIO_SM2_SHIFTCTRL_OFFSET _u(0x00000100) +#define PIO_SM2_SHIFTCTRL_BITS _u(0xffff0000) +#define PIO_SM2_SHIFTCTRL_RESET _u(0x000c0000) +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_SHIFTCTRL_FJOIN_RX +// Description : When 1, RX FIFO steals the TX FIFO's storage, and becomes twice +// as deep. +// TX FIFO is disabled as a result (always reads as both full and +// empty). +// FIFOs are flushed when this bit is changed. +#define PIO_SM2_SHIFTCTRL_FJOIN_RX_RESET _u(0x0) +#define PIO_SM2_SHIFTCTRL_FJOIN_RX_BITS _u(0x80000000) +#define PIO_SM2_SHIFTCTRL_FJOIN_RX_MSB _u(31) +#define PIO_SM2_SHIFTCTRL_FJOIN_RX_LSB _u(31) +#define PIO_SM2_SHIFTCTRL_FJOIN_RX_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_SHIFTCTRL_FJOIN_TX +// Description : When 1, TX FIFO steals the RX FIFO's storage, and becomes twice +// as deep. +// RX FIFO is disabled as a result (always reads as both full and +// empty). +// FIFOs are flushed when this bit is changed. +#define PIO_SM2_SHIFTCTRL_FJOIN_TX_RESET _u(0x0) +#define PIO_SM2_SHIFTCTRL_FJOIN_TX_BITS _u(0x40000000) +#define PIO_SM2_SHIFTCTRL_FJOIN_TX_MSB _u(30) +#define PIO_SM2_SHIFTCTRL_FJOIN_TX_LSB _u(30) +#define PIO_SM2_SHIFTCTRL_FJOIN_TX_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_SHIFTCTRL_PULL_THRESH +// Description : Number of bits shifted out of OSR before autopull, or +// conditional pull (PULL IFEMPTY), will take place. +// Write 0 for value of 32. +#define PIO_SM2_SHIFTCTRL_PULL_THRESH_RESET _u(0x00) +#define PIO_SM2_SHIFTCTRL_PULL_THRESH_BITS _u(0x3e000000) +#define PIO_SM2_SHIFTCTRL_PULL_THRESH_MSB _u(29) +#define PIO_SM2_SHIFTCTRL_PULL_THRESH_LSB _u(25) +#define PIO_SM2_SHIFTCTRL_PULL_THRESH_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_SHIFTCTRL_PUSH_THRESH +// Description : Number of bits shifted into ISR before autopush, or conditional +// push (PUSH IFFULL), will take place. +// Write 0 for value of 32. +#define PIO_SM2_SHIFTCTRL_PUSH_THRESH_RESET _u(0x00) +#define PIO_SM2_SHIFTCTRL_PUSH_THRESH_BITS _u(0x01f00000) +#define PIO_SM2_SHIFTCTRL_PUSH_THRESH_MSB _u(24) +#define PIO_SM2_SHIFTCTRL_PUSH_THRESH_LSB _u(20) +#define PIO_SM2_SHIFTCTRL_PUSH_THRESH_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_SHIFTCTRL_OUT_SHIFTDIR +// Description : 1 = shift out of output shift register to right. 0 = to left. +#define PIO_SM2_SHIFTCTRL_OUT_SHIFTDIR_RESET _u(0x1) +#define PIO_SM2_SHIFTCTRL_OUT_SHIFTDIR_BITS _u(0x00080000) +#define PIO_SM2_SHIFTCTRL_OUT_SHIFTDIR_MSB _u(19) +#define PIO_SM2_SHIFTCTRL_OUT_SHIFTDIR_LSB _u(19) +#define PIO_SM2_SHIFTCTRL_OUT_SHIFTDIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_SHIFTCTRL_IN_SHIFTDIR +// Description : 1 = shift input shift register to right (data enters from +// left). 0 = to left. +#define PIO_SM2_SHIFTCTRL_IN_SHIFTDIR_RESET _u(0x1) +#define PIO_SM2_SHIFTCTRL_IN_SHIFTDIR_BITS _u(0x00040000) +#define PIO_SM2_SHIFTCTRL_IN_SHIFTDIR_MSB _u(18) +#define PIO_SM2_SHIFTCTRL_IN_SHIFTDIR_LSB _u(18) +#define PIO_SM2_SHIFTCTRL_IN_SHIFTDIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_SHIFTCTRL_AUTOPULL +// Description : Pull automatically when the output shift register is emptied, +// i.e. on or following an OUT instruction which causes the output +// shift counter to reach or exceed PULL_THRESH. +#define PIO_SM2_SHIFTCTRL_AUTOPULL_RESET _u(0x0) +#define PIO_SM2_SHIFTCTRL_AUTOPULL_BITS _u(0x00020000) +#define PIO_SM2_SHIFTCTRL_AUTOPULL_MSB _u(17) +#define PIO_SM2_SHIFTCTRL_AUTOPULL_LSB _u(17) +#define PIO_SM2_SHIFTCTRL_AUTOPULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_SHIFTCTRL_AUTOPUSH +// Description : Push automatically when the input shift register is filled, +// i.e. on an IN instruction which causes the input shift counter +// to reach or exceed PUSH_THRESH. +#define PIO_SM2_SHIFTCTRL_AUTOPUSH_RESET _u(0x0) +#define PIO_SM2_SHIFTCTRL_AUTOPUSH_BITS _u(0x00010000) +#define PIO_SM2_SHIFTCTRL_AUTOPUSH_MSB _u(16) +#define PIO_SM2_SHIFTCTRL_AUTOPUSH_LSB _u(16) +#define PIO_SM2_SHIFTCTRL_AUTOPUSH_ACCESS "RW" +// ============================================================================= +// Register : PIO_SM2_ADDR +// Description : Current instruction address of state machine 2 +#define PIO_SM2_ADDR_OFFSET _u(0x00000104) +#define PIO_SM2_ADDR_BITS _u(0x0000001f) +#define PIO_SM2_ADDR_RESET _u(0x00000000) +#define PIO_SM2_ADDR_MSB _u(4) +#define PIO_SM2_ADDR_LSB _u(0) +#define PIO_SM2_ADDR_ACCESS "RO" +// ============================================================================= +// Register : PIO_SM2_INSTR +// Description : Read to see the instruction currently addressed by state +// machine 2's program counter +// Write to execute an instruction immediately (including jumps) +// and then resume execution. +#define PIO_SM2_INSTR_OFFSET _u(0x00000108) +#define PIO_SM2_INSTR_BITS _u(0x0000ffff) +#define PIO_SM2_INSTR_RESET "-" +#define PIO_SM2_INSTR_MSB _u(15) +#define PIO_SM2_INSTR_LSB _u(0) +#define PIO_SM2_INSTR_ACCESS "RW" +// ============================================================================= +// Register : PIO_SM2_PINCTRL +// Description : State machine pin control +#define PIO_SM2_PINCTRL_OFFSET _u(0x0000010c) +#define PIO_SM2_PINCTRL_BITS _u(0xffffffff) +#define PIO_SM2_PINCTRL_RESET _u(0x14000000) +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_PINCTRL_SIDESET_COUNT +// Description : The number of MSBs of the Delay/Side-set instruction field +// which are used for side-set. Inclusive of the enable bit, if +// present. Minimum of 0 (all delay bits, no side-set) and maximum +// of 5 (all side-set, no delay). +#define PIO_SM2_PINCTRL_SIDESET_COUNT_RESET _u(0x0) +#define PIO_SM2_PINCTRL_SIDESET_COUNT_BITS _u(0xe0000000) +#define PIO_SM2_PINCTRL_SIDESET_COUNT_MSB _u(31) +#define PIO_SM2_PINCTRL_SIDESET_COUNT_LSB _u(29) +#define PIO_SM2_PINCTRL_SIDESET_COUNT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_PINCTRL_SET_COUNT +// Description : The number of pins asserted by a SET. In the range 0 to 5 +// inclusive. +#define PIO_SM2_PINCTRL_SET_COUNT_RESET _u(0x5) +#define PIO_SM2_PINCTRL_SET_COUNT_BITS _u(0x1c000000) +#define PIO_SM2_PINCTRL_SET_COUNT_MSB _u(28) +#define PIO_SM2_PINCTRL_SET_COUNT_LSB _u(26) +#define PIO_SM2_PINCTRL_SET_COUNT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_PINCTRL_OUT_COUNT +// Description : The number of pins asserted by an OUT PINS, OUT PINDIRS or MOV +// PINS instruction. In the range 0 to 32 inclusive. +#define PIO_SM2_PINCTRL_OUT_COUNT_RESET _u(0x00) +#define PIO_SM2_PINCTRL_OUT_COUNT_BITS _u(0x03f00000) +#define PIO_SM2_PINCTRL_OUT_COUNT_MSB _u(25) +#define PIO_SM2_PINCTRL_OUT_COUNT_LSB _u(20) +#define PIO_SM2_PINCTRL_OUT_COUNT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_PINCTRL_IN_BASE +// Description : The pin which is mapped to the least-significant bit of a state +// machine's IN data bus. Higher-numbered pins are mapped to +// consecutively more-significant data bits, with a modulo of 32 +// applied to pin number. +#define PIO_SM2_PINCTRL_IN_BASE_RESET _u(0x00) +#define PIO_SM2_PINCTRL_IN_BASE_BITS _u(0x000f8000) +#define PIO_SM2_PINCTRL_IN_BASE_MSB _u(19) +#define PIO_SM2_PINCTRL_IN_BASE_LSB _u(15) +#define PIO_SM2_PINCTRL_IN_BASE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_PINCTRL_SIDESET_BASE +// Description : The lowest-numbered pin that will be affected by a side-set +// operation. The MSBs of an instruction's side-set/delay field +// (up to 5, determined by SIDESET_COUNT) are used for side-set +// data, with the remaining LSBs used for delay. The +// least-significant bit of the side-set portion is the bit +// written to this pin, with more-significant bits written to +// higher-numbered pins. +#define PIO_SM2_PINCTRL_SIDESET_BASE_RESET _u(0x00) +#define PIO_SM2_PINCTRL_SIDESET_BASE_BITS _u(0x00007c00) +#define PIO_SM2_PINCTRL_SIDESET_BASE_MSB _u(14) +#define PIO_SM2_PINCTRL_SIDESET_BASE_LSB _u(10) +#define PIO_SM2_PINCTRL_SIDESET_BASE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_PINCTRL_SET_BASE +// Description : The lowest-numbered pin that will be affected by a SET PINS or +// SET PINDIRS instruction. The data written to this pin is the +// least-significant bit of the SET data. +#define PIO_SM2_PINCTRL_SET_BASE_RESET _u(0x00) +#define PIO_SM2_PINCTRL_SET_BASE_BITS _u(0x000003e0) +#define PIO_SM2_PINCTRL_SET_BASE_MSB _u(9) +#define PIO_SM2_PINCTRL_SET_BASE_LSB _u(5) +#define PIO_SM2_PINCTRL_SET_BASE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM2_PINCTRL_OUT_BASE +// Description : The lowest-numbered pin that will be affected by an OUT PINS, +// OUT PINDIRS or MOV PINS instruction. The data written to this +// pin will always be the least-significant bit of the OUT or MOV +// data. +#define PIO_SM2_PINCTRL_OUT_BASE_RESET _u(0x00) +#define PIO_SM2_PINCTRL_OUT_BASE_BITS _u(0x0000001f) +#define PIO_SM2_PINCTRL_OUT_BASE_MSB _u(4) +#define PIO_SM2_PINCTRL_OUT_BASE_LSB _u(0) +#define PIO_SM2_PINCTRL_OUT_BASE_ACCESS "RW" +// ============================================================================= +// Register : PIO_SM3_CLKDIV +// Description : Clock divisor register for state machine 3 +// Frequency = clock freq / (CLKDIV_INT + CLKDIV_FRAC / 256) +#define PIO_SM3_CLKDIV_OFFSET _u(0x00000110) +#define PIO_SM3_CLKDIV_BITS _u(0xffffff00) +#define PIO_SM3_CLKDIV_RESET _u(0x00010000) +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_CLKDIV_INT +// Description : Effective frequency is sysclk/(int + frac/256). +// Value of 0 is interpreted as 65536. If INT is 0, FRAC must also +// be 0. +#define PIO_SM3_CLKDIV_INT_RESET _u(0x0001) +#define PIO_SM3_CLKDIV_INT_BITS _u(0xffff0000) +#define PIO_SM3_CLKDIV_INT_MSB _u(31) +#define PIO_SM3_CLKDIV_INT_LSB _u(16) +#define PIO_SM3_CLKDIV_INT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_CLKDIV_FRAC +// Description : Fractional part of clock divisor +#define PIO_SM3_CLKDIV_FRAC_RESET _u(0x00) +#define PIO_SM3_CLKDIV_FRAC_BITS _u(0x0000ff00) +#define PIO_SM3_CLKDIV_FRAC_MSB _u(15) +#define PIO_SM3_CLKDIV_FRAC_LSB _u(8) +#define PIO_SM3_CLKDIV_FRAC_ACCESS "RW" +// ============================================================================= +// Register : PIO_SM3_EXECCTRL +// Description : Execution/behavioural settings for state machine 3 +#define PIO_SM3_EXECCTRL_OFFSET _u(0x00000114) +#define PIO_SM3_EXECCTRL_BITS _u(0xffffff9f) +#define PIO_SM3_EXECCTRL_RESET _u(0x0001f000) +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_EXECCTRL_EXEC_STALLED +// Description : If 1, an instruction written to SMx_INSTR is stalled, and +// latched by the state machine. Will clear to 0 once this +// instruction completes. +#define PIO_SM3_EXECCTRL_EXEC_STALLED_RESET _u(0x0) +#define PIO_SM3_EXECCTRL_EXEC_STALLED_BITS _u(0x80000000) +#define PIO_SM3_EXECCTRL_EXEC_STALLED_MSB _u(31) +#define PIO_SM3_EXECCTRL_EXEC_STALLED_LSB _u(31) +#define PIO_SM3_EXECCTRL_EXEC_STALLED_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_EXECCTRL_SIDE_EN +// Description : If 1, the MSB of the Delay/Side-set instruction field is used +// as side-set enable, rather than a side-set data bit. This +// allows instructions to perform side-set optionally, rather than +// on every instruction, but the maximum possible side-set width +// is reduced from 5 to 4. Note that the value of +// PINCTRL_SIDESET_COUNT is inclusive of this enable bit. +#define PIO_SM3_EXECCTRL_SIDE_EN_RESET _u(0x0) +#define PIO_SM3_EXECCTRL_SIDE_EN_BITS _u(0x40000000) +#define PIO_SM3_EXECCTRL_SIDE_EN_MSB _u(30) +#define PIO_SM3_EXECCTRL_SIDE_EN_LSB _u(30) +#define PIO_SM3_EXECCTRL_SIDE_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_EXECCTRL_SIDE_PINDIR +// Description : If 1, side-set data is asserted to pin directions, instead of +// pin values +#define PIO_SM3_EXECCTRL_SIDE_PINDIR_RESET _u(0x0) +#define PIO_SM3_EXECCTRL_SIDE_PINDIR_BITS _u(0x20000000) +#define PIO_SM3_EXECCTRL_SIDE_PINDIR_MSB _u(29) +#define PIO_SM3_EXECCTRL_SIDE_PINDIR_LSB _u(29) +#define PIO_SM3_EXECCTRL_SIDE_PINDIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_EXECCTRL_JMP_PIN +// Description : The GPIO number to use as condition for JMP PIN. Unaffected by +// input mapping. +#define PIO_SM3_EXECCTRL_JMP_PIN_RESET _u(0x00) +#define PIO_SM3_EXECCTRL_JMP_PIN_BITS _u(0x1f000000) +#define PIO_SM3_EXECCTRL_JMP_PIN_MSB _u(28) +#define PIO_SM3_EXECCTRL_JMP_PIN_LSB _u(24) +#define PIO_SM3_EXECCTRL_JMP_PIN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_EXECCTRL_OUT_EN_SEL +// Description : Which data bit to use for inline OUT enable +#define PIO_SM3_EXECCTRL_OUT_EN_SEL_RESET _u(0x00) +#define PIO_SM3_EXECCTRL_OUT_EN_SEL_BITS _u(0x00f80000) +#define PIO_SM3_EXECCTRL_OUT_EN_SEL_MSB _u(23) +#define PIO_SM3_EXECCTRL_OUT_EN_SEL_LSB _u(19) +#define PIO_SM3_EXECCTRL_OUT_EN_SEL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_EXECCTRL_INLINE_OUT_EN +// Description : If 1, use a bit of OUT data as an auxiliary write enable +// When used in conjunction with OUT_STICKY, writes with an enable +// of 0 will +// deassert the latest pin write. This can create useful +// masking/override behaviour +// due to the priority ordering of state machine pin writes (SM0 < +// SM1 < ...) +#define PIO_SM3_EXECCTRL_INLINE_OUT_EN_RESET _u(0x0) +#define PIO_SM3_EXECCTRL_INLINE_OUT_EN_BITS _u(0x00040000) +#define PIO_SM3_EXECCTRL_INLINE_OUT_EN_MSB _u(18) +#define PIO_SM3_EXECCTRL_INLINE_OUT_EN_LSB _u(18) +#define PIO_SM3_EXECCTRL_INLINE_OUT_EN_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_EXECCTRL_OUT_STICKY +// Description : Continuously assert the most recent OUT/SET to the pins +#define PIO_SM3_EXECCTRL_OUT_STICKY_RESET _u(0x0) +#define PIO_SM3_EXECCTRL_OUT_STICKY_BITS _u(0x00020000) +#define PIO_SM3_EXECCTRL_OUT_STICKY_MSB _u(17) +#define PIO_SM3_EXECCTRL_OUT_STICKY_LSB _u(17) +#define PIO_SM3_EXECCTRL_OUT_STICKY_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_EXECCTRL_WRAP_TOP +// Description : After reaching this address, execution is wrapped to +// wrap_bottom. +// If the instruction is a jump, and the jump condition is true, +// the jump takes priority. +#define PIO_SM3_EXECCTRL_WRAP_TOP_RESET _u(0x1f) +#define PIO_SM3_EXECCTRL_WRAP_TOP_BITS _u(0x0001f000) +#define PIO_SM3_EXECCTRL_WRAP_TOP_MSB _u(16) +#define PIO_SM3_EXECCTRL_WRAP_TOP_LSB _u(12) +#define PIO_SM3_EXECCTRL_WRAP_TOP_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_EXECCTRL_WRAP_BOTTOM +// Description : After reaching wrap_top, execution is wrapped to this address. +#define PIO_SM3_EXECCTRL_WRAP_BOTTOM_RESET _u(0x00) +#define PIO_SM3_EXECCTRL_WRAP_BOTTOM_BITS _u(0x00000f80) +#define PIO_SM3_EXECCTRL_WRAP_BOTTOM_MSB _u(11) +#define PIO_SM3_EXECCTRL_WRAP_BOTTOM_LSB _u(7) +#define PIO_SM3_EXECCTRL_WRAP_BOTTOM_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_EXECCTRL_STATUS_SEL +// Description : Comparison used for the MOV x, STATUS instruction. +// 0x0 -> All-ones if TX FIFO level < N, otherwise all-zeroes +// 0x1 -> All-ones if RX FIFO level < N, otherwise all-zeroes +#define PIO_SM3_EXECCTRL_STATUS_SEL_RESET _u(0x0) +#define PIO_SM3_EXECCTRL_STATUS_SEL_BITS _u(0x00000010) +#define PIO_SM3_EXECCTRL_STATUS_SEL_MSB _u(4) +#define PIO_SM3_EXECCTRL_STATUS_SEL_LSB _u(4) +#define PIO_SM3_EXECCTRL_STATUS_SEL_ACCESS "RW" +#define PIO_SM3_EXECCTRL_STATUS_SEL_VALUE_TXLEVEL _u(0x0) +#define PIO_SM3_EXECCTRL_STATUS_SEL_VALUE_RXLEVEL _u(0x1) +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_EXECCTRL_STATUS_N +// Description : Comparison level for the MOV x, STATUS instruction +#define PIO_SM3_EXECCTRL_STATUS_N_RESET _u(0x0) +#define PIO_SM3_EXECCTRL_STATUS_N_BITS _u(0x0000000f) +#define PIO_SM3_EXECCTRL_STATUS_N_MSB _u(3) +#define PIO_SM3_EXECCTRL_STATUS_N_LSB _u(0) +#define PIO_SM3_EXECCTRL_STATUS_N_ACCESS "RW" +// ============================================================================= +// Register : PIO_SM3_SHIFTCTRL +// Description : Control behaviour of the input/output shift registers for state +// machine 3 +#define PIO_SM3_SHIFTCTRL_OFFSET _u(0x00000118) +#define PIO_SM3_SHIFTCTRL_BITS _u(0xffff0000) +#define PIO_SM3_SHIFTCTRL_RESET _u(0x000c0000) +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_SHIFTCTRL_FJOIN_RX +// Description : When 1, RX FIFO steals the TX FIFO's storage, and becomes twice +// as deep. +// TX FIFO is disabled as a result (always reads as both full and +// empty). +// FIFOs are flushed when this bit is changed. +#define PIO_SM3_SHIFTCTRL_FJOIN_RX_RESET _u(0x0) +#define PIO_SM3_SHIFTCTRL_FJOIN_RX_BITS _u(0x80000000) +#define PIO_SM3_SHIFTCTRL_FJOIN_RX_MSB _u(31) +#define PIO_SM3_SHIFTCTRL_FJOIN_RX_LSB _u(31) +#define PIO_SM3_SHIFTCTRL_FJOIN_RX_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_SHIFTCTRL_FJOIN_TX +// Description : When 1, TX FIFO steals the RX FIFO's storage, and becomes twice +// as deep. +// RX FIFO is disabled as a result (always reads as both full and +// empty). +// FIFOs are flushed when this bit is changed. +#define PIO_SM3_SHIFTCTRL_FJOIN_TX_RESET _u(0x0) +#define PIO_SM3_SHIFTCTRL_FJOIN_TX_BITS _u(0x40000000) +#define PIO_SM3_SHIFTCTRL_FJOIN_TX_MSB _u(30) +#define PIO_SM3_SHIFTCTRL_FJOIN_TX_LSB _u(30) +#define PIO_SM3_SHIFTCTRL_FJOIN_TX_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_SHIFTCTRL_PULL_THRESH +// Description : Number of bits shifted out of OSR before autopull, or +// conditional pull (PULL IFEMPTY), will take place. +// Write 0 for value of 32. +#define PIO_SM3_SHIFTCTRL_PULL_THRESH_RESET _u(0x00) +#define PIO_SM3_SHIFTCTRL_PULL_THRESH_BITS _u(0x3e000000) +#define PIO_SM3_SHIFTCTRL_PULL_THRESH_MSB _u(29) +#define PIO_SM3_SHIFTCTRL_PULL_THRESH_LSB _u(25) +#define PIO_SM3_SHIFTCTRL_PULL_THRESH_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_SHIFTCTRL_PUSH_THRESH +// Description : Number of bits shifted into ISR before autopush, or conditional +// push (PUSH IFFULL), will take place. +// Write 0 for value of 32. +#define PIO_SM3_SHIFTCTRL_PUSH_THRESH_RESET _u(0x00) +#define PIO_SM3_SHIFTCTRL_PUSH_THRESH_BITS _u(0x01f00000) +#define PIO_SM3_SHIFTCTRL_PUSH_THRESH_MSB _u(24) +#define PIO_SM3_SHIFTCTRL_PUSH_THRESH_LSB _u(20) +#define PIO_SM3_SHIFTCTRL_PUSH_THRESH_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_SHIFTCTRL_OUT_SHIFTDIR +// Description : 1 = shift out of output shift register to right. 0 = to left. +#define PIO_SM3_SHIFTCTRL_OUT_SHIFTDIR_RESET _u(0x1) +#define PIO_SM3_SHIFTCTRL_OUT_SHIFTDIR_BITS _u(0x00080000) +#define PIO_SM3_SHIFTCTRL_OUT_SHIFTDIR_MSB _u(19) +#define PIO_SM3_SHIFTCTRL_OUT_SHIFTDIR_LSB _u(19) +#define PIO_SM3_SHIFTCTRL_OUT_SHIFTDIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_SHIFTCTRL_IN_SHIFTDIR +// Description : 1 = shift input shift register to right (data enters from +// left). 0 = to left. +#define PIO_SM3_SHIFTCTRL_IN_SHIFTDIR_RESET _u(0x1) +#define PIO_SM3_SHIFTCTRL_IN_SHIFTDIR_BITS _u(0x00040000) +#define PIO_SM3_SHIFTCTRL_IN_SHIFTDIR_MSB _u(18) +#define PIO_SM3_SHIFTCTRL_IN_SHIFTDIR_LSB _u(18) +#define PIO_SM3_SHIFTCTRL_IN_SHIFTDIR_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_SHIFTCTRL_AUTOPULL +// Description : Pull automatically when the output shift register is emptied, +// i.e. on or following an OUT instruction which causes the output +// shift counter to reach or exceed PULL_THRESH. +#define PIO_SM3_SHIFTCTRL_AUTOPULL_RESET _u(0x0) +#define PIO_SM3_SHIFTCTRL_AUTOPULL_BITS _u(0x00020000) +#define PIO_SM3_SHIFTCTRL_AUTOPULL_MSB _u(17) +#define PIO_SM3_SHIFTCTRL_AUTOPULL_LSB _u(17) +#define PIO_SM3_SHIFTCTRL_AUTOPULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_SHIFTCTRL_AUTOPUSH +// Description : Push automatically when the input shift register is filled, +// i.e. on an IN instruction which causes the input shift counter +// to reach or exceed PUSH_THRESH. +#define PIO_SM3_SHIFTCTRL_AUTOPUSH_RESET _u(0x0) +#define PIO_SM3_SHIFTCTRL_AUTOPUSH_BITS _u(0x00010000) +#define PIO_SM3_SHIFTCTRL_AUTOPUSH_MSB _u(16) +#define PIO_SM3_SHIFTCTRL_AUTOPUSH_LSB _u(16) +#define PIO_SM3_SHIFTCTRL_AUTOPUSH_ACCESS "RW" +// ============================================================================= +// Register : PIO_SM3_ADDR +// Description : Current instruction address of state machine 3 +#define PIO_SM3_ADDR_OFFSET _u(0x0000011c) +#define PIO_SM3_ADDR_BITS _u(0x0000001f) +#define PIO_SM3_ADDR_RESET _u(0x00000000) +#define PIO_SM3_ADDR_MSB _u(4) +#define PIO_SM3_ADDR_LSB _u(0) +#define PIO_SM3_ADDR_ACCESS "RO" +// ============================================================================= +// Register : PIO_SM3_INSTR +// Description : Read to see the instruction currently addressed by state +// machine 3's program counter +// Write to execute an instruction immediately (including jumps) +// and then resume execution. +#define PIO_SM3_INSTR_OFFSET _u(0x00000120) +#define PIO_SM3_INSTR_BITS _u(0x0000ffff) +#define PIO_SM3_INSTR_RESET "-" +#define PIO_SM3_INSTR_MSB _u(15) +#define PIO_SM3_INSTR_LSB _u(0) +#define PIO_SM3_INSTR_ACCESS "RW" +// ============================================================================= +// Register : PIO_SM3_PINCTRL +// Description : State machine pin control +#define PIO_SM3_PINCTRL_OFFSET _u(0x00000124) +#define PIO_SM3_PINCTRL_BITS _u(0xffffffff) +#define PIO_SM3_PINCTRL_RESET _u(0x14000000) +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_PINCTRL_SIDESET_COUNT +// Description : The number of MSBs of the Delay/Side-set instruction field +// which are used for side-set. Inclusive of the enable bit, if +// present. Minimum of 0 (all delay bits, no side-set) and maximum +// of 5 (all side-set, no delay). +#define PIO_SM3_PINCTRL_SIDESET_COUNT_RESET _u(0x0) +#define PIO_SM3_PINCTRL_SIDESET_COUNT_BITS _u(0xe0000000) +#define PIO_SM3_PINCTRL_SIDESET_COUNT_MSB _u(31) +#define PIO_SM3_PINCTRL_SIDESET_COUNT_LSB _u(29) +#define PIO_SM3_PINCTRL_SIDESET_COUNT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_PINCTRL_SET_COUNT +// Description : The number of pins asserted by a SET. In the range 0 to 5 +// inclusive. +#define PIO_SM3_PINCTRL_SET_COUNT_RESET _u(0x5) +#define PIO_SM3_PINCTRL_SET_COUNT_BITS _u(0x1c000000) +#define PIO_SM3_PINCTRL_SET_COUNT_MSB _u(28) +#define PIO_SM3_PINCTRL_SET_COUNT_LSB _u(26) +#define PIO_SM3_PINCTRL_SET_COUNT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_PINCTRL_OUT_COUNT +// Description : The number of pins asserted by an OUT PINS, OUT PINDIRS or MOV +// PINS instruction. In the range 0 to 32 inclusive. +#define PIO_SM3_PINCTRL_OUT_COUNT_RESET _u(0x00) +#define PIO_SM3_PINCTRL_OUT_COUNT_BITS _u(0x03f00000) +#define PIO_SM3_PINCTRL_OUT_COUNT_MSB _u(25) +#define PIO_SM3_PINCTRL_OUT_COUNT_LSB _u(20) +#define PIO_SM3_PINCTRL_OUT_COUNT_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_PINCTRL_IN_BASE +// Description : The pin which is mapped to the least-significant bit of a state +// machine's IN data bus. Higher-numbered pins are mapped to +// consecutively more-significant data bits, with a modulo of 32 +// applied to pin number. +#define PIO_SM3_PINCTRL_IN_BASE_RESET _u(0x00) +#define PIO_SM3_PINCTRL_IN_BASE_BITS _u(0x000f8000) +#define PIO_SM3_PINCTRL_IN_BASE_MSB _u(19) +#define PIO_SM3_PINCTRL_IN_BASE_LSB _u(15) +#define PIO_SM3_PINCTRL_IN_BASE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_PINCTRL_SIDESET_BASE +// Description : The lowest-numbered pin that will be affected by a side-set +// operation. The MSBs of an instruction's side-set/delay field +// (up to 5, determined by SIDESET_COUNT) are used for side-set +// data, with the remaining LSBs used for delay. The +// least-significant bit of the side-set portion is the bit +// written to this pin, with more-significant bits written to +// higher-numbered pins. +#define PIO_SM3_PINCTRL_SIDESET_BASE_RESET _u(0x00) +#define PIO_SM3_PINCTRL_SIDESET_BASE_BITS _u(0x00007c00) +#define PIO_SM3_PINCTRL_SIDESET_BASE_MSB _u(14) +#define PIO_SM3_PINCTRL_SIDESET_BASE_LSB _u(10) +#define PIO_SM3_PINCTRL_SIDESET_BASE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_PINCTRL_SET_BASE +// Description : The lowest-numbered pin that will be affected by a SET PINS or +// SET PINDIRS instruction. The data written to this pin is the +// least-significant bit of the SET data. +#define PIO_SM3_PINCTRL_SET_BASE_RESET _u(0x00) +#define PIO_SM3_PINCTRL_SET_BASE_BITS _u(0x000003e0) +#define PIO_SM3_PINCTRL_SET_BASE_MSB _u(9) +#define PIO_SM3_PINCTRL_SET_BASE_LSB _u(5) +#define PIO_SM3_PINCTRL_SET_BASE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_SM3_PINCTRL_OUT_BASE +// Description : The lowest-numbered pin that will be affected by an OUT PINS, +// OUT PINDIRS or MOV PINS instruction. The data written to this +// pin will always be the least-significant bit of the OUT or MOV +// data. +#define PIO_SM3_PINCTRL_OUT_BASE_RESET _u(0x00) +#define PIO_SM3_PINCTRL_OUT_BASE_BITS _u(0x0000001f) +#define PIO_SM3_PINCTRL_OUT_BASE_MSB _u(4) +#define PIO_SM3_PINCTRL_OUT_BASE_LSB _u(0) +#define PIO_SM3_PINCTRL_OUT_BASE_ACCESS "RW" +// ============================================================================= +// Register : PIO_INTR +// Description : Raw Interrupts +#define PIO_INTR_OFFSET _u(0x00000128) +#define PIO_INTR_BITS _u(0x00000fff) +#define PIO_INTR_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PIO_INTR_SM3 +// Description : None +#define PIO_INTR_SM3_RESET _u(0x0) +#define PIO_INTR_SM3_BITS _u(0x00000800) +#define PIO_INTR_SM3_MSB _u(11) +#define PIO_INTR_SM3_LSB _u(11) +#define PIO_INTR_SM3_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_INTR_SM2 +// Description : None +#define PIO_INTR_SM2_RESET _u(0x0) +#define PIO_INTR_SM2_BITS _u(0x00000400) +#define PIO_INTR_SM2_MSB _u(10) +#define PIO_INTR_SM2_LSB _u(10) +#define PIO_INTR_SM2_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_INTR_SM1 +// Description : None +#define PIO_INTR_SM1_RESET _u(0x0) +#define PIO_INTR_SM1_BITS _u(0x00000200) +#define PIO_INTR_SM1_MSB _u(9) +#define PIO_INTR_SM1_LSB _u(9) +#define PIO_INTR_SM1_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_INTR_SM0 +// Description : None +#define PIO_INTR_SM0_RESET _u(0x0) +#define PIO_INTR_SM0_BITS _u(0x00000100) +#define PIO_INTR_SM0_MSB _u(8) +#define PIO_INTR_SM0_LSB _u(8) +#define PIO_INTR_SM0_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_INTR_SM3_TXNFULL +// Description : None +#define PIO_INTR_SM3_TXNFULL_RESET _u(0x0) +#define PIO_INTR_SM3_TXNFULL_BITS _u(0x00000080) +#define PIO_INTR_SM3_TXNFULL_MSB _u(7) +#define PIO_INTR_SM3_TXNFULL_LSB _u(7) +#define PIO_INTR_SM3_TXNFULL_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_INTR_SM2_TXNFULL +// Description : None +#define PIO_INTR_SM2_TXNFULL_RESET _u(0x0) +#define PIO_INTR_SM2_TXNFULL_BITS _u(0x00000040) +#define PIO_INTR_SM2_TXNFULL_MSB _u(6) +#define PIO_INTR_SM2_TXNFULL_LSB _u(6) +#define PIO_INTR_SM2_TXNFULL_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_INTR_SM1_TXNFULL +// Description : None +#define PIO_INTR_SM1_TXNFULL_RESET _u(0x0) +#define PIO_INTR_SM1_TXNFULL_BITS _u(0x00000020) +#define PIO_INTR_SM1_TXNFULL_MSB _u(5) +#define PIO_INTR_SM1_TXNFULL_LSB _u(5) +#define PIO_INTR_SM1_TXNFULL_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_INTR_SM0_TXNFULL +// Description : None +#define PIO_INTR_SM0_TXNFULL_RESET _u(0x0) +#define PIO_INTR_SM0_TXNFULL_BITS _u(0x00000010) +#define PIO_INTR_SM0_TXNFULL_MSB _u(4) +#define PIO_INTR_SM0_TXNFULL_LSB _u(4) +#define PIO_INTR_SM0_TXNFULL_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_INTR_SM3_RXNEMPTY +// Description : None +#define PIO_INTR_SM3_RXNEMPTY_RESET _u(0x0) +#define PIO_INTR_SM3_RXNEMPTY_BITS _u(0x00000008) +#define PIO_INTR_SM3_RXNEMPTY_MSB _u(3) +#define PIO_INTR_SM3_RXNEMPTY_LSB _u(3) +#define PIO_INTR_SM3_RXNEMPTY_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_INTR_SM2_RXNEMPTY +// Description : None +#define PIO_INTR_SM2_RXNEMPTY_RESET _u(0x0) +#define PIO_INTR_SM2_RXNEMPTY_BITS _u(0x00000004) +#define PIO_INTR_SM2_RXNEMPTY_MSB _u(2) +#define PIO_INTR_SM2_RXNEMPTY_LSB _u(2) +#define PIO_INTR_SM2_RXNEMPTY_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_INTR_SM1_RXNEMPTY +// Description : None +#define PIO_INTR_SM1_RXNEMPTY_RESET _u(0x0) +#define PIO_INTR_SM1_RXNEMPTY_BITS _u(0x00000002) +#define PIO_INTR_SM1_RXNEMPTY_MSB _u(1) +#define PIO_INTR_SM1_RXNEMPTY_LSB _u(1) +#define PIO_INTR_SM1_RXNEMPTY_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_INTR_SM0_RXNEMPTY +// Description : None +#define PIO_INTR_SM0_RXNEMPTY_RESET _u(0x0) +#define PIO_INTR_SM0_RXNEMPTY_BITS _u(0x00000001) +#define PIO_INTR_SM0_RXNEMPTY_MSB _u(0) +#define PIO_INTR_SM0_RXNEMPTY_LSB _u(0) +#define PIO_INTR_SM0_RXNEMPTY_ACCESS "RO" +// ============================================================================= +// Register : PIO_IRQ0_INTE +// Description : Interrupt Enable for irq0 +#define PIO_IRQ0_INTE_OFFSET _u(0x0000012c) +#define PIO_IRQ0_INTE_BITS _u(0x00000fff) +#define PIO_IRQ0_INTE_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTE_SM3 +// Description : None +#define PIO_IRQ0_INTE_SM3_RESET _u(0x0) +#define PIO_IRQ0_INTE_SM3_BITS _u(0x00000800) +#define PIO_IRQ0_INTE_SM3_MSB _u(11) +#define PIO_IRQ0_INTE_SM3_LSB _u(11) +#define PIO_IRQ0_INTE_SM3_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTE_SM2 +// Description : None +#define PIO_IRQ0_INTE_SM2_RESET _u(0x0) +#define PIO_IRQ0_INTE_SM2_BITS _u(0x00000400) +#define PIO_IRQ0_INTE_SM2_MSB _u(10) +#define PIO_IRQ0_INTE_SM2_LSB _u(10) +#define PIO_IRQ0_INTE_SM2_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTE_SM1 +// Description : None +#define PIO_IRQ0_INTE_SM1_RESET _u(0x0) +#define PIO_IRQ0_INTE_SM1_BITS _u(0x00000200) +#define PIO_IRQ0_INTE_SM1_MSB _u(9) +#define PIO_IRQ0_INTE_SM1_LSB _u(9) +#define PIO_IRQ0_INTE_SM1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTE_SM0 +// Description : None +#define PIO_IRQ0_INTE_SM0_RESET _u(0x0) +#define PIO_IRQ0_INTE_SM0_BITS _u(0x00000100) +#define PIO_IRQ0_INTE_SM0_MSB _u(8) +#define PIO_IRQ0_INTE_SM0_LSB _u(8) +#define PIO_IRQ0_INTE_SM0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTE_SM3_TXNFULL +// Description : None +#define PIO_IRQ0_INTE_SM3_TXNFULL_RESET _u(0x0) +#define PIO_IRQ0_INTE_SM3_TXNFULL_BITS _u(0x00000080) +#define PIO_IRQ0_INTE_SM3_TXNFULL_MSB _u(7) +#define PIO_IRQ0_INTE_SM3_TXNFULL_LSB _u(7) +#define PIO_IRQ0_INTE_SM3_TXNFULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTE_SM2_TXNFULL +// Description : None +#define PIO_IRQ0_INTE_SM2_TXNFULL_RESET _u(0x0) +#define PIO_IRQ0_INTE_SM2_TXNFULL_BITS _u(0x00000040) +#define PIO_IRQ0_INTE_SM2_TXNFULL_MSB _u(6) +#define PIO_IRQ0_INTE_SM2_TXNFULL_LSB _u(6) +#define PIO_IRQ0_INTE_SM2_TXNFULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTE_SM1_TXNFULL +// Description : None +#define PIO_IRQ0_INTE_SM1_TXNFULL_RESET _u(0x0) +#define PIO_IRQ0_INTE_SM1_TXNFULL_BITS _u(0x00000020) +#define PIO_IRQ0_INTE_SM1_TXNFULL_MSB _u(5) +#define PIO_IRQ0_INTE_SM1_TXNFULL_LSB _u(5) +#define PIO_IRQ0_INTE_SM1_TXNFULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTE_SM0_TXNFULL +// Description : None +#define PIO_IRQ0_INTE_SM0_TXNFULL_RESET _u(0x0) +#define PIO_IRQ0_INTE_SM0_TXNFULL_BITS _u(0x00000010) +#define PIO_IRQ0_INTE_SM0_TXNFULL_MSB _u(4) +#define PIO_IRQ0_INTE_SM0_TXNFULL_LSB _u(4) +#define PIO_IRQ0_INTE_SM0_TXNFULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTE_SM3_RXNEMPTY +// Description : None +#define PIO_IRQ0_INTE_SM3_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ0_INTE_SM3_RXNEMPTY_BITS _u(0x00000008) +#define PIO_IRQ0_INTE_SM3_RXNEMPTY_MSB _u(3) +#define PIO_IRQ0_INTE_SM3_RXNEMPTY_LSB _u(3) +#define PIO_IRQ0_INTE_SM3_RXNEMPTY_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTE_SM2_RXNEMPTY +// Description : None +#define PIO_IRQ0_INTE_SM2_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ0_INTE_SM2_RXNEMPTY_BITS _u(0x00000004) +#define PIO_IRQ0_INTE_SM2_RXNEMPTY_MSB _u(2) +#define PIO_IRQ0_INTE_SM2_RXNEMPTY_LSB _u(2) +#define PIO_IRQ0_INTE_SM2_RXNEMPTY_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTE_SM1_RXNEMPTY +// Description : None +#define PIO_IRQ0_INTE_SM1_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ0_INTE_SM1_RXNEMPTY_BITS _u(0x00000002) +#define PIO_IRQ0_INTE_SM1_RXNEMPTY_MSB _u(1) +#define PIO_IRQ0_INTE_SM1_RXNEMPTY_LSB _u(1) +#define PIO_IRQ0_INTE_SM1_RXNEMPTY_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTE_SM0_RXNEMPTY +// Description : None +#define PIO_IRQ0_INTE_SM0_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ0_INTE_SM0_RXNEMPTY_BITS _u(0x00000001) +#define PIO_IRQ0_INTE_SM0_RXNEMPTY_MSB _u(0) +#define PIO_IRQ0_INTE_SM0_RXNEMPTY_LSB _u(0) +#define PIO_IRQ0_INTE_SM0_RXNEMPTY_ACCESS "RW" +// ============================================================================= +// Register : PIO_IRQ0_INTF +// Description : Interrupt Force for irq0 +#define PIO_IRQ0_INTF_OFFSET _u(0x00000130) +#define PIO_IRQ0_INTF_BITS _u(0x00000fff) +#define PIO_IRQ0_INTF_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTF_SM3 +// Description : None +#define PIO_IRQ0_INTF_SM3_RESET _u(0x0) +#define PIO_IRQ0_INTF_SM3_BITS _u(0x00000800) +#define PIO_IRQ0_INTF_SM3_MSB _u(11) +#define PIO_IRQ0_INTF_SM3_LSB _u(11) +#define PIO_IRQ0_INTF_SM3_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTF_SM2 +// Description : None +#define PIO_IRQ0_INTF_SM2_RESET _u(0x0) +#define PIO_IRQ0_INTF_SM2_BITS _u(0x00000400) +#define PIO_IRQ0_INTF_SM2_MSB _u(10) +#define PIO_IRQ0_INTF_SM2_LSB _u(10) +#define PIO_IRQ0_INTF_SM2_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTF_SM1 +// Description : None +#define PIO_IRQ0_INTF_SM1_RESET _u(0x0) +#define PIO_IRQ0_INTF_SM1_BITS _u(0x00000200) +#define PIO_IRQ0_INTF_SM1_MSB _u(9) +#define PIO_IRQ0_INTF_SM1_LSB _u(9) +#define PIO_IRQ0_INTF_SM1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTF_SM0 +// Description : None +#define PIO_IRQ0_INTF_SM0_RESET _u(0x0) +#define PIO_IRQ0_INTF_SM0_BITS _u(0x00000100) +#define PIO_IRQ0_INTF_SM0_MSB _u(8) +#define PIO_IRQ0_INTF_SM0_LSB _u(8) +#define PIO_IRQ0_INTF_SM0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTF_SM3_TXNFULL +// Description : None +#define PIO_IRQ0_INTF_SM3_TXNFULL_RESET _u(0x0) +#define PIO_IRQ0_INTF_SM3_TXNFULL_BITS _u(0x00000080) +#define PIO_IRQ0_INTF_SM3_TXNFULL_MSB _u(7) +#define PIO_IRQ0_INTF_SM3_TXNFULL_LSB _u(7) +#define PIO_IRQ0_INTF_SM3_TXNFULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTF_SM2_TXNFULL +// Description : None +#define PIO_IRQ0_INTF_SM2_TXNFULL_RESET _u(0x0) +#define PIO_IRQ0_INTF_SM2_TXNFULL_BITS _u(0x00000040) +#define PIO_IRQ0_INTF_SM2_TXNFULL_MSB _u(6) +#define PIO_IRQ0_INTF_SM2_TXNFULL_LSB _u(6) +#define PIO_IRQ0_INTF_SM2_TXNFULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTF_SM1_TXNFULL +// Description : None +#define PIO_IRQ0_INTF_SM1_TXNFULL_RESET _u(0x0) +#define PIO_IRQ0_INTF_SM1_TXNFULL_BITS _u(0x00000020) +#define PIO_IRQ0_INTF_SM1_TXNFULL_MSB _u(5) +#define PIO_IRQ0_INTF_SM1_TXNFULL_LSB _u(5) +#define PIO_IRQ0_INTF_SM1_TXNFULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTF_SM0_TXNFULL +// Description : None +#define PIO_IRQ0_INTF_SM0_TXNFULL_RESET _u(0x0) +#define PIO_IRQ0_INTF_SM0_TXNFULL_BITS _u(0x00000010) +#define PIO_IRQ0_INTF_SM0_TXNFULL_MSB _u(4) +#define PIO_IRQ0_INTF_SM0_TXNFULL_LSB _u(4) +#define PIO_IRQ0_INTF_SM0_TXNFULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTF_SM3_RXNEMPTY +// Description : None +#define PIO_IRQ0_INTF_SM3_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ0_INTF_SM3_RXNEMPTY_BITS _u(0x00000008) +#define PIO_IRQ0_INTF_SM3_RXNEMPTY_MSB _u(3) +#define PIO_IRQ0_INTF_SM3_RXNEMPTY_LSB _u(3) +#define PIO_IRQ0_INTF_SM3_RXNEMPTY_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTF_SM2_RXNEMPTY +// Description : None +#define PIO_IRQ0_INTF_SM2_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ0_INTF_SM2_RXNEMPTY_BITS _u(0x00000004) +#define PIO_IRQ0_INTF_SM2_RXNEMPTY_MSB _u(2) +#define PIO_IRQ0_INTF_SM2_RXNEMPTY_LSB _u(2) +#define PIO_IRQ0_INTF_SM2_RXNEMPTY_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTF_SM1_RXNEMPTY +// Description : None +#define PIO_IRQ0_INTF_SM1_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ0_INTF_SM1_RXNEMPTY_BITS _u(0x00000002) +#define PIO_IRQ0_INTF_SM1_RXNEMPTY_MSB _u(1) +#define PIO_IRQ0_INTF_SM1_RXNEMPTY_LSB _u(1) +#define PIO_IRQ0_INTF_SM1_RXNEMPTY_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTF_SM0_RXNEMPTY +// Description : None +#define PIO_IRQ0_INTF_SM0_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ0_INTF_SM0_RXNEMPTY_BITS _u(0x00000001) +#define PIO_IRQ0_INTF_SM0_RXNEMPTY_MSB _u(0) +#define PIO_IRQ0_INTF_SM0_RXNEMPTY_LSB _u(0) +#define PIO_IRQ0_INTF_SM0_RXNEMPTY_ACCESS "RW" +// ============================================================================= +// Register : PIO_IRQ0_INTS +// Description : Interrupt status after masking & forcing for irq0 +#define PIO_IRQ0_INTS_OFFSET _u(0x00000134) +#define PIO_IRQ0_INTS_BITS _u(0x00000fff) +#define PIO_IRQ0_INTS_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTS_SM3 +// Description : None +#define PIO_IRQ0_INTS_SM3_RESET _u(0x0) +#define PIO_IRQ0_INTS_SM3_BITS _u(0x00000800) +#define PIO_IRQ0_INTS_SM3_MSB _u(11) +#define PIO_IRQ0_INTS_SM3_LSB _u(11) +#define PIO_IRQ0_INTS_SM3_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTS_SM2 +// Description : None +#define PIO_IRQ0_INTS_SM2_RESET _u(0x0) +#define PIO_IRQ0_INTS_SM2_BITS _u(0x00000400) +#define PIO_IRQ0_INTS_SM2_MSB _u(10) +#define PIO_IRQ0_INTS_SM2_LSB _u(10) +#define PIO_IRQ0_INTS_SM2_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTS_SM1 +// Description : None +#define PIO_IRQ0_INTS_SM1_RESET _u(0x0) +#define PIO_IRQ0_INTS_SM1_BITS _u(0x00000200) +#define PIO_IRQ0_INTS_SM1_MSB _u(9) +#define PIO_IRQ0_INTS_SM1_LSB _u(9) +#define PIO_IRQ0_INTS_SM1_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTS_SM0 +// Description : None +#define PIO_IRQ0_INTS_SM0_RESET _u(0x0) +#define PIO_IRQ0_INTS_SM0_BITS _u(0x00000100) +#define PIO_IRQ0_INTS_SM0_MSB _u(8) +#define PIO_IRQ0_INTS_SM0_LSB _u(8) +#define PIO_IRQ0_INTS_SM0_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTS_SM3_TXNFULL +// Description : None +#define PIO_IRQ0_INTS_SM3_TXNFULL_RESET _u(0x0) +#define PIO_IRQ0_INTS_SM3_TXNFULL_BITS _u(0x00000080) +#define PIO_IRQ0_INTS_SM3_TXNFULL_MSB _u(7) +#define PIO_IRQ0_INTS_SM3_TXNFULL_LSB _u(7) +#define PIO_IRQ0_INTS_SM3_TXNFULL_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTS_SM2_TXNFULL +// Description : None +#define PIO_IRQ0_INTS_SM2_TXNFULL_RESET _u(0x0) +#define PIO_IRQ0_INTS_SM2_TXNFULL_BITS _u(0x00000040) +#define PIO_IRQ0_INTS_SM2_TXNFULL_MSB _u(6) +#define PIO_IRQ0_INTS_SM2_TXNFULL_LSB _u(6) +#define PIO_IRQ0_INTS_SM2_TXNFULL_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTS_SM1_TXNFULL +// Description : None +#define PIO_IRQ0_INTS_SM1_TXNFULL_RESET _u(0x0) +#define PIO_IRQ0_INTS_SM1_TXNFULL_BITS _u(0x00000020) +#define PIO_IRQ0_INTS_SM1_TXNFULL_MSB _u(5) +#define PIO_IRQ0_INTS_SM1_TXNFULL_LSB _u(5) +#define PIO_IRQ0_INTS_SM1_TXNFULL_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTS_SM0_TXNFULL +// Description : None +#define PIO_IRQ0_INTS_SM0_TXNFULL_RESET _u(0x0) +#define PIO_IRQ0_INTS_SM0_TXNFULL_BITS _u(0x00000010) +#define PIO_IRQ0_INTS_SM0_TXNFULL_MSB _u(4) +#define PIO_IRQ0_INTS_SM0_TXNFULL_LSB _u(4) +#define PIO_IRQ0_INTS_SM0_TXNFULL_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTS_SM3_RXNEMPTY +// Description : None +#define PIO_IRQ0_INTS_SM3_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ0_INTS_SM3_RXNEMPTY_BITS _u(0x00000008) +#define PIO_IRQ0_INTS_SM3_RXNEMPTY_MSB _u(3) +#define PIO_IRQ0_INTS_SM3_RXNEMPTY_LSB _u(3) +#define PIO_IRQ0_INTS_SM3_RXNEMPTY_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTS_SM2_RXNEMPTY +// Description : None +#define PIO_IRQ0_INTS_SM2_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ0_INTS_SM2_RXNEMPTY_BITS _u(0x00000004) +#define PIO_IRQ0_INTS_SM2_RXNEMPTY_MSB _u(2) +#define PIO_IRQ0_INTS_SM2_RXNEMPTY_LSB _u(2) +#define PIO_IRQ0_INTS_SM2_RXNEMPTY_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTS_SM1_RXNEMPTY +// Description : None +#define PIO_IRQ0_INTS_SM1_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ0_INTS_SM1_RXNEMPTY_BITS _u(0x00000002) +#define PIO_IRQ0_INTS_SM1_RXNEMPTY_MSB _u(1) +#define PIO_IRQ0_INTS_SM1_RXNEMPTY_LSB _u(1) +#define PIO_IRQ0_INTS_SM1_RXNEMPTY_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ0_INTS_SM0_RXNEMPTY +// Description : None +#define PIO_IRQ0_INTS_SM0_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ0_INTS_SM0_RXNEMPTY_BITS _u(0x00000001) +#define PIO_IRQ0_INTS_SM0_RXNEMPTY_MSB _u(0) +#define PIO_IRQ0_INTS_SM0_RXNEMPTY_LSB _u(0) +#define PIO_IRQ0_INTS_SM0_RXNEMPTY_ACCESS "RO" +// ============================================================================= +// Register : PIO_IRQ1_INTE +// Description : Interrupt Enable for irq1 +#define PIO_IRQ1_INTE_OFFSET _u(0x00000138) +#define PIO_IRQ1_INTE_BITS _u(0x00000fff) +#define PIO_IRQ1_INTE_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTE_SM3 +// Description : None +#define PIO_IRQ1_INTE_SM3_RESET _u(0x0) +#define PIO_IRQ1_INTE_SM3_BITS _u(0x00000800) +#define PIO_IRQ1_INTE_SM3_MSB _u(11) +#define PIO_IRQ1_INTE_SM3_LSB _u(11) +#define PIO_IRQ1_INTE_SM3_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTE_SM2 +// Description : None +#define PIO_IRQ1_INTE_SM2_RESET _u(0x0) +#define PIO_IRQ1_INTE_SM2_BITS _u(0x00000400) +#define PIO_IRQ1_INTE_SM2_MSB _u(10) +#define PIO_IRQ1_INTE_SM2_LSB _u(10) +#define PIO_IRQ1_INTE_SM2_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTE_SM1 +// Description : None +#define PIO_IRQ1_INTE_SM1_RESET _u(0x0) +#define PIO_IRQ1_INTE_SM1_BITS _u(0x00000200) +#define PIO_IRQ1_INTE_SM1_MSB _u(9) +#define PIO_IRQ1_INTE_SM1_LSB _u(9) +#define PIO_IRQ1_INTE_SM1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTE_SM0 +// Description : None +#define PIO_IRQ1_INTE_SM0_RESET _u(0x0) +#define PIO_IRQ1_INTE_SM0_BITS _u(0x00000100) +#define PIO_IRQ1_INTE_SM0_MSB _u(8) +#define PIO_IRQ1_INTE_SM0_LSB _u(8) +#define PIO_IRQ1_INTE_SM0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTE_SM3_TXNFULL +// Description : None +#define PIO_IRQ1_INTE_SM3_TXNFULL_RESET _u(0x0) +#define PIO_IRQ1_INTE_SM3_TXNFULL_BITS _u(0x00000080) +#define PIO_IRQ1_INTE_SM3_TXNFULL_MSB _u(7) +#define PIO_IRQ1_INTE_SM3_TXNFULL_LSB _u(7) +#define PIO_IRQ1_INTE_SM3_TXNFULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTE_SM2_TXNFULL +// Description : None +#define PIO_IRQ1_INTE_SM2_TXNFULL_RESET _u(0x0) +#define PIO_IRQ1_INTE_SM2_TXNFULL_BITS _u(0x00000040) +#define PIO_IRQ1_INTE_SM2_TXNFULL_MSB _u(6) +#define PIO_IRQ1_INTE_SM2_TXNFULL_LSB _u(6) +#define PIO_IRQ1_INTE_SM2_TXNFULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTE_SM1_TXNFULL +// Description : None +#define PIO_IRQ1_INTE_SM1_TXNFULL_RESET _u(0x0) +#define PIO_IRQ1_INTE_SM1_TXNFULL_BITS _u(0x00000020) +#define PIO_IRQ1_INTE_SM1_TXNFULL_MSB _u(5) +#define PIO_IRQ1_INTE_SM1_TXNFULL_LSB _u(5) +#define PIO_IRQ1_INTE_SM1_TXNFULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTE_SM0_TXNFULL +// Description : None +#define PIO_IRQ1_INTE_SM0_TXNFULL_RESET _u(0x0) +#define PIO_IRQ1_INTE_SM0_TXNFULL_BITS _u(0x00000010) +#define PIO_IRQ1_INTE_SM0_TXNFULL_MSB _u(4) +#define PIO_IRQ1_INTE_SM0_TXNFULL_LSB _u(4) +#define PIO_IRQ1_INTE_SM0_TXNFULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTE_SM3_RXNEMPTY +// Description : None +#define PIO_IRQ1_INTE_SM3_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ1_INTE_SM3_RXNEMPTY_BITS _u(0x00000008) +#define PIO_IRQ1_INTE_SM3_RXNEMPTY_MSB _u(3) +#define PIO_IRQ1_INTE_SM3_RXNEMPTY_LSB _u(3) +#define PIO_IRQ1_INTE_SM3_RXNEMPTY_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTE_SM2_RXNEMPTY +// Description : None +#define PIO_IRQ1_INTE_SM2_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ1_INTE_SM2_RXNEMPTY_BITS _u(0x00000004) +#define PIO_IRQ1_INTE_SM2_RXNEMPTY_MSB _u(2) +#define PIO_IRQ1_INTE_SM2_RXNEMPTY_LSB _u(2) +#define PIO_IRQ1_INTE_SM2_RXNEMPTY_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTE_SM1_RXNEMPTY +// Description : None +#define PIO_IRQ1_INTE_SM1_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ1_INTE_SM1_RXNEMPTY_BITS _u(0x00000002) +#define PIO_IRQ1_INTE_SM1_RXNEMPTY_MSB _u(1) +#define PIO_IRQ1_INTE_SM1_RXNEMPTY_LSB _u(1) +#define PIO_IRQ1_INTE_SM1_RXNEMPTY_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTE_SM0_RXNEMPTY +// Description : None +#define PIO_IRQ1_INTE_SM0_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ1_INTE_SM0_RXNEMPTY_BITS _u(0x00000001) +#define PIO_IRQ1_INTE_SM0_RXNEMPTY_MSB _u(0) +#define PIO_IRQ1_INTE_SM0_RXNEMPTY_LSB _u(0) +#define PIO_IRQ1_INTE_SM0_RXNEMPTY_ACCESS "RW" +// ============================================================================= +// Register : PIO_IRQ1_INTF +// Description : Interrupt Force for irq1 +#define PIO_IRQ1_INTF_OFFSET _u(0x0000013c) +#define PIO_IRQ1_INTF_BITS _u(0x00000fff) +#define PIO_IRQ1_INTF_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTF_SM3 +// Description : None +#define PIO_IRQ1_INTF_SM3_RESET _u(0x0) +#define PIO_IRQ1_INTF_SM3_BITS _u(0x00000800) +#define PIO_IRQ1_INTF_SM3_MSB _u(11) +#define PIO_IRQ1_INTF_SM3_LSB _u(11) +#define PIO_IRQ1_INTF_SM3_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTF_SM2 +// Description : None +#define PIO_IRQ1_INTF_SM2_RESET _u(0x0) +#define PIO_IRQ1_INTF_SM2_BITS _u(0x00000400) +#define PIO_IRQ1_INTF_SM2_MSB _u(10) +#define PIO_IRQ1_INTF_SM2_LSB _u(10) +#define PIO_IRQ1_INTF_SM2_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTF_SM1 +// Description : None +#define PIO_IRQ1_INTF_SM1_RESET _u(0x0) +#define PIO_IRQ1_INTF_SM1_BITS _u(0x00000200) +#define PIO_IRQ1_INTF_SM1_MSB _u(9) +#define PIO_IRQ1_INTF_SM1_LSB _u(9) +#define PIO_IRQ1_INTF_SM1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTF_SM0 +// Description : None +#define PIO_IRQ1_INTF_SM0_RESET _u(0x0) +#define PIO_IRQ1_INTF_SM0_BITS _u(0x00000100) +#define PIO_IRQ1_INTF_SM0_MSB _u(8) +#define PIO_IRQ1_INTF_SM0_LSB _u(8) +#define PIO_IRQ1_INTF_SM0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTF_SM3_TXNFULL +// Description : None +#define PIO_IRQ1_INTF_SM3_TXNFULL_RESET _u(0x0) +#define PIO_IRQ1_INTF_SM3_TXNFULL_BITS _u(0x00000080) +#define PIO_IRQ1_INTF_SM3_TXNFULL_MSB _u(7) +#define PIO_IRQ1_INTF_SM3_TXNFULL_LSB _u(7) +#define PIO_IRQ1_INTF_SM3_TXNFULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTF_SM2_TXNFULL +// Description : None +#define PIO_IRQ1_INTF_SM2_TXNFULL_RESET _u(0x0) +#define PIO_IRQ1_INTF_SM2_TXNFULL_BITS _u(0x00000040) +#define PIO_IRQ1_INTF_SM2_TXNFULL_MSB _u(6) +#define PIO_IRQ1_INTF_SM2_TXNFULL_LSB _u(6) +#define PIO_IRQ1_INTF_SM2_TXNFULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTF_SM1_TXNFULL +// Description : None +#define PIO_IRQ1_INTF_SM1_TXNFULL_RESET _u(0x0) +#define PIO_IRQ1_INTF_SM1_TXNFULL_BITS _u(0x00000020) +#define PIO_IRQ1_INTF_SM1_TXNFULL_MSB _u(5) +#define PIO_IRQ1_INTF_SM1_TXNFULL_LSB _u(5) +#define PIO_IRQ1_INTF_SM1_TXNFULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTF_SM0_TXNFULL +// Description : None +#define PIO_IRQ1_INTF_SM0_TXNFULL_RESET _u(0x0) +#define PIO_IRQ1_INTF_SM0_TXNFULL_BITS _u(0x00000010) +#define PIO_IRQ1_INTF_SM0_TXNFULL_MSB _u(4) +#define PIO_IRQ1_INTF_SM0_TXNFULL_LSB _u(4) +#define PIO_IRQ1_INTF_SM0_TXNFULL_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTF_SM3_RXNEMPTY +// Description : None +#define PIO_IRQ1_INTF_SM3_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ1_INTF_SM3_RXNEMPTY_BITS _u(0x00000008) +#define PIO_IRQ1_INTF_SM3_RXNEMPTY_MSB _u(3) +#define PIO_IRQ1_INTF_SM3_RXNEMPTY_LSB _u(3) +#define PIO_IRQ1_INTF_SM3_RXNEMPTY_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTF_SM2_RXNEMPTY +// Description : None +#define PIO_IRQ1_INTF_SM2_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ1_INTF_SM2_RXNEMPTY_BITS _u(0x00000004) +#define PIO_IRQ1_INTF_SM2_RXNEMPTY_MSB _u(2) +#define PIO_IRQ1_INTF_SM2_RXNEMPTY_LSB _u(2) +#define PIO_IRQ1_INTF_SM2_RXNEMPTY_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTF_SM1_RXNEMPTY +// Description : None +#define PIO_IRQ1_INTF_SM1_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ1_INTF_SM1_RXNEMPTY_BITS _u(0x00000002) +#define PIO_IRQ1_INTF_SM1_RXNEMPTY_MSB _u(1) +#define PIO_IRQ1_INTF_SM1_RXNEMPTY_LSB _u(1) +#define PIO_IRQ1_INTF_SM1_RXNEMPTY_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTF_SM0_RXNEMPTY +// Description : None +#define PIO_IRQ1_INTF_SM0_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ1_INTF_SM0_RXNEMPTY_BITS _u(0x00000001) +#define PIO_IRQ1_INTF_SM0_RXNEMPTY_MSB _u(0) +#define PIO_IRQ1_INTF_SM0_RXNEMPTY_LSB _u(0) +#define PIO_IRQ1_INTF_SM0_RXNEMPTY_ACCESS "RW" +// ============================================================================= +// Register : PIO_IRQ1_INTS +// Description : Interrupt status after masking & forcing for irq1 +#define PIO_IRQ1_INTS_OFFSET _u(0x00000140) +#define PIO_IRQ1_INTS_BITS _u(0x00000fff) +#define PIO_IRQ1_INTS_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTS_SM3 +// Description : None +#define PIO_IRQ1_INTS_SM3_RESET _u(0x0) +#define PIO_IRQ1_INTS_SM3_BITS _u(0x00000800) +#define PIO_IRQ1_INTS_SM3_MSB _u(11) +#define PIO_IRQ1_INTS_SM3_LSB _u(11) +#define PIO_IRQ1_INTS_SM3_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTS_SM2 +// Description : None +#define PIO_IRQ1_INTS_SM2_RESET _u(0x0) +#define PIO_IRQ1_INTS_SM2_BITS _u(0x00000400) +#define PIO_IRQ1_INTS_SM2_MSB _u(10) +#define PIO_IRQ1_INTS_SM2_LSB _u(10) +#define PIO_IRQ1_INTS_SM2_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTS_SM1 +// Description : None +#define PIO_IRQ1_INTS_SM1_RESET _u(0x0) +#define PIO_IRQ1_INTS_SM1_BITS _u(0x00000200) +#define PIO_IRQ1_INTS_SM1_MSB _u(9) +#define PIO_IRQ1_INTS_SM1_LSB _u(9) +#define PIO_IRQ1_INTS_SM1_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTS_SM0 +// Description : None +#define PIO_IRQ1_INTS_SM0_RESET _u(0x0) +#define PIO_IRQ1_INTS_SM0_BITS _u(0x00000100) +#define PIO_IRQ1_INTS_SM0_MSB _u(8) +#define PIO_IRQ1_INTS_SM0_LSB _u(8) +#define PIO_IRQ1_INTS_SM0_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTS_SM3_TXNFULL +// Description : None +#define PIO_IRQ1_INTS_SM3_TXNFULL_RESET _u(0x0) +#define PIO_IRQ1_INTS_SM3_TXNFULL_BITS _u(0x00000080) +#define PIO_IRQ1_INTS_SM3_TXNFULL_MSB _u(7) +#define PIO_IRQ1_INTS_SM3_TXNFULL_LSB _u(7) +#define PIO_IRQ1_INTS_SM3_TXNFULL_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTS_SM2_TXNFULL +// Description : None +#define PIO_IRQ1_INTS_SM2_TXNFULL_RESET _u(0x0) +#define PIO_IRQ1_INTS_SM2_TXNFULL_BITS _u(0x00000040) +#define PIO_IRQ1_INTS_SM2_TXNFULL_MSB _u(6) +#define PIO_IRQ1_INTS_SM2_TXNFULL_LSB _u(6) +#define PIO_IRQ1_INTS_SM2_TXNFULL_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTS_SM1_TXNFULL +// Description : None +#define PIO_IRQ1_INTS_SM1_TXNFULL_RESET _u(0x0) +#define PIO_IRQ1_INTS_SM1_TXNFULL_BITS _u(0x00000020) +#define PIO_IRQ1_INTS_SM1_TXNFULL_MSB _u(5) +#define PIO_IRQ1_INTS_SM1_TXNFULL_LSB _u(5) +#define PIO_IRQ1_INTS_SM1_TXNFULL_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTS_SM0_TXNFULL +// Description : None +#define PIO_IRQ1_INTS_SM0_TXNFULL_RESET _u(0x0) +#define PIO_IRQ1_INTS_SM0_TXNFULL_BITS _u(0x00000010) +#define PIO_IRQ1_INTS_SM0_TXNFULL_MSB _u(4) +#define PIO_IRQ1_INTS_SM0_TXNFULL_LSB _u(4) +#define PIO_IRQ1_INTS_SM0_TXNFULL_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTS_SM3_RXNEMPTY +// Description : None +#define PIO_IRQ1_INTS_SM3_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ1_INTS_SM3_RXNEMPTY_BITS _u(0x00000008) +#define PIO_IRQ1_INTS_SM3_RXNEMPTY_MSB _u(3) +#define PIO_IRQ1_INTS_SM3_RXNEMPTY_LSB _u(3) +#define PIO_IRQ1_INTS_SM3_RXNEMPTY_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTS_SM2_RXNEMPTY +// Description : None +#define PIO_IRQ1_INTS_SM2_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ1_INTS_SM2_RXNEMPTY_BITS _u(0x00000004) +#define PIO_IRQ1_INTS_SM2_RXNEMPTY_MSB _u(2) +#define PIO_IRQ1_INTS_SM2_RXNEMPTY_LSB _u(2) +#define PIO_IRQ1_INTS_SM2_RXNEMPTY_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTS_SM1_RXNEMPTY +// Description : None +#define PIO_IRQ1_INTS_SM1_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ1_INTS_SM1_RXNEMPTY_BITS _u(0x00000002) +#define PIO_IRQ1_INTS_SM1_RXNEMPTY_MSB _u(1) +#define PIO_IRQ1_INTS_SM1_RXNEMPTY_LSB _u(1) +#define PIO_IRQ1_INTS_SM1_RXNEMPTY_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : PIO_IRQ1_INTS_SM0_RXNEMPTY +// Description : None +#define PIO_IRQ1_INTS_SM0_RXNEMPTY_RESET _u(0x0) +#define PIO_IRQ1_INTS_SM0_RXNEMPTY_BITS _u(0x00000001) +#define PIO_IRQ1_INTS_SM0_RXNEMPTY_MSB _u(0) +#define PIO_IRQ1_INTS_SM0_RXNEMPTY_LSB _u(0) +#define PIO_IRQ1_INTS_SM0_RXNEMPTY_ACCESS "RO" +// ============================================================================= +#endif // HARDWARE_REGS_PIO_DEFINED |