diff options
Diffstat (limited to 'lib/pico-sdk/rp2350/hardware/regs/watchdog.h')
| -rw-r--r-- | lib/pico-sdk/rp2350/hardware/regs/watchdog.h | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/lib/pico-sdk/rp2350/hardware/regs/watchdog.h b/lib/pico-sdk/rp2350/hardware/regs/watchdog.h new file mode 100644 index 00000000..07e5b405 --- /dev/null +++ b/lib/pico-sdk/rp2350/hardware/regs/watchdog.h @@ -0,0 +1,192 @@ +// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT + +/** + * Copyright (c) 2024 Raspberry Pi Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +// ============================================================================= +// Register block : WATCHDOG +// Version : 1 +// Bus type : apb +// ============================================================================= +#ifndef _HARDWARE_REGS_WATCHDOG_H +#define _HARDWARE_REGS_WATCHDOG_H +// ============================================================================= +// Register : WATCHDOG_CTRL +// Description : Watchdog control +// The rst_wdsel register determines which subsystems are reset +// when the watchdog is triggered. +// The watchdog can be triggered in software. +#define WATCHDOG_CTRL_OFFSET _u(0x00000000) +#define WATCHDOG_CTRL_BITS _u(0xc7ffffff) +#define WATCHDOG_CTRL_RESET _u(0x07000000) +// ----------------------------------------------------------------------------- +// Field : WATCHDOG_CTRL_TRIGGER +// Description : Trigger a watchdog reset +#define WATCHDOG_CTRL_TRIGGER_RESET _u(0x0) +#define WATCHDOG_CTRL_TRIGGER_BITS _u(0x80000000) +#define WATCHDOG_CTRL_TRIGGER_MSB _u(31) +#define WATCHDOG_CTRL_TRIGGER_LSB _u(31) +#define WATCHDOG_CTRL_TRIGGER_ACCESS "SC" +// ----------------------------------------------------------------------------- +// Field : WATCHDOG_CTRL_ENABLE +// Description : When not enabled the watchdog timer is paused +#define WATCHDOG_CTRL_ENABLE_RESET _u(0x0) +#define WATCHDOG_CTRL_ENABLE_BITS _u(0x40000000) +#define WATCHDOG_CTRL_ENABLE_MSB _u(30) +#define WATCHDOG_CTRL_ENABLE_LSB _u(30) +#define WATCHDOG_CTRL_ENABLE_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : WATCHDOG_CTRL_PAUSE_DBG1 +// Description : Pause the watchdog timer when processor 1 is in debug mode +#define WATCHDOG_CTRL_PAUSE_DBG1_RESET _u(0x1) +#define WATCHDOG_CTRL_PAUSE_DBG1_BITS _u(0x04000000) +#define WATCHDOG_CTRL_PAUSE_DBG1_MSB _u(26) +#define WATCHDOG_CTRL_PAUSE_DBG1_LSB _u(26) +#define WATCHDOG_CTRL_PAUSE_DBG1_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : WATCHDOG_CTRL_PAUSE_DBG0 +// Description : Pause the watchdog timer when processor 0 is in debug mode +#define WATCHDOG_CTRL_PAUSE_DBG0_RESET _u(0x1) +#define WATCHDOG_CTRL_PAUSE_DBG0_BITS _u(0x02000000) +#define WATCHDOG_CTRL_PAUSE_DBG0_MSB _u(25) +#define WATCHDOG_CTRL_PAUSE_DBG0_LSB _u(25) +#define WATCHDOG_CTRL_PAUSE_DBG0_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : WATCHDOG_CTRL_PAUSE_JTAG +// Description : Pause the watchdog timer when JTAG is accessing the bus fabric +#define WATCHDOG_CTRL_PAUSE_JTAG_RESET _u(0x1) +#define WATCHDOG_CTRL_PAUSE_JTAG_BITS _u(0x01000000) +#define WATCHDOG_CTRL_PAUSE_JTAG_MSB _u(24) +#define WATCHDOG_CTRL_PAUSE_JTAG_LSB _u(24) +#define WATCHDOG_CTRL_PAUSE_JTAG_ACCESS "RW" +// ----------------------------------------------------------------------------- +// Field : WATCHDOG_CTRL_TIME +// Description : Indicates the time in usec before a watchdog reset will be +// triggered +#define WATCHDOG_CTRL_TIME_RESET _u(0x000000) +#define WATCHDOG_CTRL_TIME_BITS _u(0x00ffffff) +#define WATCHDOG_CTRL_TIME_MSB _u(23) +#define WATCHDOG_CTRL_TIME_LSB _u(0) +#define WATCHDOG_CTRL_TIME_ACCESS "RO" +// ============================================================================= +// Register : WATCHDOG_LOAD +// Description : Load the watchdog timer. The maximum setting is 0xffffff which +// corresponds to approximately 16 seconds. +#define WATCHDOG_LOAD_OFFSET _u(0x00000004) +#define WATCHDOG_LOAD_BITS _u(0x00ffffff) +#define WATCHDOG_LOAD_RESET _u(0x00000000) +#define WATCHDOG_LOAD_MSB _u(23) +#define WATCHDOG_LOAD_LSB _u(0) +#define WATCHDOG_LOAD_ACCESS "WF" +// ============================================================================= +// Register : WATCHDOG_REASON +// Description : Logs the reason for the last reset. Both bits are zero for the +// case of a hardware reset. +// +// Additionally, as of RP2350, a debugger warm reset of either +// core (SYSRESETREQ or hartreset) will also clear the watchdog +// reason register, so that software loaded under the debugger +// following a watchdog timeout will not continue to see the +// timeout condition. +#define WATCHDOG_REASON_OFFSET _u(0x00000008) +#define WATCHDOG_REASON_BITS _u(0x00000003) +#define WATCHDOG_REASON_RESET _u(0x00000000) +// ----------------------------------------------------------------------------- +// Field : WATCHDOG_REASON_FORCE +#define WATCHDOG_REASON_FORCE_RESET _u(0x0) +#define WATCHDOG_REASON_FORCE_BITS _u(0x00000002) +#define WATCHDOG_REASON_FORCE_MSB _u(1) +#define WATCHDOG_REASON_FORCE_LSB _u(1) +#define WATCHDOG_REASON_FORCE_ACCESS "RO" +// ----------------------------------------------------------------------------- +// Field : WATCHDOG_REASON_TIMER +#define WATCHDOG_REASON_TIMER_RESET _u(0x0) +#define WATCHDOG_REASON_TIMER_BITS _u(0x00000001) +#define WATCHDOG_REASON_TIMER_MSB _u(0) +#define WATCHDOG_REASON_TIMER_LSB _u(0) +#define WATCHDOG_REASON_TIMER_ACCESS "RO" +// ============================================================================= +// Register : WATCHDOG_SCRATCH0 +// Description : Scratch register. Information persists through soft reset of +// the chip. +#define WATCHDOG_SCRATCH0_OFFSET _u(0x0000000c) +#define WATCHDOG_SCRATCH0_BITS _u(0xffffffff) +#define WATCHDOG_SCRATCH0_RESET _u(0x00000000) +#define WATCHDOG_SCRATCH0_MSB _u(31) +#define WATCHDOG_SCRATCH0_LSB _u(0) +#define WATCHDOG_SCRATCH0_ACCESS "RW" +// ============================================================================= +// Register : WATCHDOG_SCRATCH1 +// Description : Scratch register. Information persists through soft reset of +// the chip. +#define WATCHDOG_SCRATCH1_OFFSET _u(0x00000010) +#define WATCHDOG_SCRATCH1_BITS _u(0xffffffff) +#define WATCHDOG_SCRATCH1_RESET _u(0x00000000) +#define WATCHDOG_SCRATCH1_MSB _u(31) +#define WATCHDOG_SCRATCH1_LSB _u(0) +#define WATCHDOG_SCRATCH1_ACCESS "RW" +// ============================================================================= +// Register : WATCHDOG_SCRATCH2 +// Description : Scratch register. Information persists through soft reset of +// the chip. +#define WATCHDOG_SCRATCH2_OFFSET _u(0x00000014) +#define WATCHDOG_SCRATCH2_BITS _u(0xffffffff) +#define WATCHDOG_SCRATCH2_RESET _u(0x00000000) +#define WATCHDOG_SCRATCH2_MSB _u(31) +#define WATCHDOG_SCRATCH2_LSB _u(0) +#define WATCHDOG_SCRATCH2_ACCESS "RW" +// ============================================================================= +// Register : WATCHDOG_SCRATCH3 +// Description : Scratch register. Information persists through soft reset of +// the chip. +#define WATCHDOG_SCRATCH3_OFFSET _u(0x00000018) +#define WATCHDOG_SCRATCH3_BITS _u(0xffffffff) +#define WATCHDOG_SCRATCH3_RESET _u(0x00000000) +#define WATCHDOG_SCRATCH3_MSB _u(31) +#define WATCHDOG_SCRATCH3_LSB _u(0) +#define WATCHDOG_SCRATCH3_ACCESS "RW" +// ============================================================================= +// Register : WATCHDOG_SCRATCH4 +// Description : Scratch register. Information persists through soft reset of +// the chip. +#define WATCHDOG_SCRATCH4_OFFSET _u(0x0000001c) +#define WATCHDOG_SCRATCH4_BITS _u(0xffffffff) +#define WATCHDOG_SCRATCH4_RESET _u(0x00000000) +#define WATCHDOG_SCRATCH4_MSB _u(31) +#define WATCHDOG_SCRATCH4_LSB _u(0) +#define WATCHDOG_SCRATCH4_ACCESS "RW" +// ============================================================================= +// Register : WATCHDOG_SCRATCH5 +// Description : Scratch register. Information persists through soft reset of +// the chip. +#define WATCHDOG_SCRATCH5_OFFSET _u(0x00000020) +#define WATCHDOG_SCRATCH5_BITS _u(0xffffffff) +#define WATCHDOG_SCRATCH5_RESET _u(0x00000000) +#define WATCHDOG_SCRATCH5_MSB _u(31) +#define WATCHDOG_SCRATCH5_LSB _u(0) +#define WATCHDOG_SCRATCH5_ACCESS "RW" +// ============================================================================= +// Register : WATCHDOG_SCRATCH6 +// Description : Scratch register. Information persists through soft reset of +// the chip. +#define WATCHDOG_SCRATCH6_OFFSET _u(0x00000024) +#define WATCHDOG_SCRATCH6_BITS _u(0xffffffff) +#define WATCHDOG_SCRATCH6_RESET _u(0x00000000) +#define WATCHDOG_SCRATCH6_MSB _u(31) +#define WATCHDOG_SCRATCH6_LSB _u(0) +#define WATCHDOG_SCRATCH6_ACCESS "RW" +// ============================================================================= +// Register : WATCHDOG_SCRATCH7 +// Description : Scratch register. Information persists through soft reset of +// the chip. +#define WATCHDOG_SCRATCH7_OFFSET _u(0x00000028) +#define WATCHDOG_SCRATCH7_BITS _u(0xffffffff) +#define WATCHDOG_SCRATCH7_RESET _u(0x00000000) +#define WATCHDOG_SCRATCH7_MSB _u(31) +#define WATCHDOG_SCRATCH7_LSB _u(0) +#define WATCHDOG_SCRATCH7_ACCESS "RW" +// ============================================================================= +#endif // _HARDWARE_REGS_WATCHDOG_H + |