diff options
Diffstat (limited to 'lib/hal-stm32f0/include/stm32f0xx_hal_smartcard.h')
| -rw-r--r-- | lib/hal-stm32f0/include/stm32f0xx_hal_smartcard.h | 1078 |
1 files changed, 0 insertions, 1078 deletions
diff --git a/lib/hal-stm32f0/include/stm32f0xx_hal_smartcard.h b/lib/hal-stm32f0/include/stm32f0xx_hal_smartcard.h deleted file mode 100644 index f8c229ce..00000000 --- a/lib/hal-stm32f0/include/stm32f0xx_hal_smartcard.h +++ /dev/null @@ -1,1078 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_smartcard.h - * @author MCD Application Team - * @brief Header file of SMARTCARD HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F0xx_HAL_SMARTCARD_H -#define __STM32F0xx_HAL_SMARTCARD_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_hal_def.h" - -/** @addtogroup STM32F0xx_HAL_Driver - * @{ - */ - -/** @addtogroup SMARTCARD - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types - * @{ - */ - -/** - * @brief SMARTCARD Init Structure definition - */ -typedef struct -{ - uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate. - The baud rate register is computed using the following formula: - Baud Rate Register = ((PCLKx) / ((hsmartcard->Init.BaudRate))) */ - - uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. - This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */ - - uint32_t StopBits; /*!< Specifies the number of stop bits. - This parameter can be a value of @ref SMARTCARD_Stop_Bits. */ - - uint16_t Parity; /*!< Specifies the parity mode. - This parameter can be a value of @ref SMARTCARD_Parity - @note The parity is enabled by default (PCE is forced to 1). - Since the WordLength is forced to 8 bits + parity, M is - forced to 1 and the parity bit is the 9th bit. */ - - uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. - This parameter can be a value of @ref SMARTCARD_Mode */ - - uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock. - This parameter can be a value of @ref SMARTCARD_Clock_Polarity */ - - uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. - This parameter can be a value of @ref SMARTCARD_Clock_Phase */ - - uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted - data bit (MSB) has to be output on the SCLK pin in synchronous mode. - This parameter can be a value of @ref SMARTCARD_Last_Bit */ - - uint16_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. - Selecting the single sample method increases the receiver tolerance to clock - deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling. */ - - uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler. */ - - uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time applied after stop bits. */ - - uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled - in case of parity error. - This parameter can be a value of @ref SMARTCARD_NACK_Enable */ - - uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled. - This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/ - - uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks: - it is used to implement the Character Wait Time (CWT) and - Block Wait Time (BWT). It is coded over 24 bits. */ - - uint8_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode. - This parameter can be any value from 0x0 to 0xFF */ - - uint8_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in - receive and transmit mode). When set to 0, retransmission is - disabled. Otherwise, its maximum value is 7 (before signalling - an error) */ - -}SMARTCARD_InitTypeDef; - -/** - * @brief SMARTCARD advanced features initalization structure definition - */ -typedef struct -{ - uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several - advanced features may be initialized at the same time. This parameter - can be a value of @ref SMARTCARD_Advanced_Features_Initialization_Type */ - - uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. - This parameter can be a value of @ref SMARTCARD_Tx_Inv */ - - uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. - This parameter can be a value of @ref SMARTCARD_Rx_Inv */ - - uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic - vs negative/inverted logic). - This parameter can be a value of @ref SMARTCARD_Data_Inv */ - - uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. - This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */ - - uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. - This parameter can be a value of @ref SMARTCARD_Overrun_Disable */ - - uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. - This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */ - - uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. - This parameter can be a value of @ref SMARTCARD_MSB_First */ -}SMARTCARD_AdvFeatureInitTypeDef; - -/** - * @brief HAL SMARTCARD State structures definition - * @note HAL SMARTCARD State value is a combination of 2 different substates: gState and RxState. - * - gState contains SMARTCARD state information related to global Handle management - * and also information related to Tx operations. - * gState value coding follow below described bitmap : - * b7-b6 Error information - * 00 : No Error - * 01 : (Not Used) - * 10 : Timeout - * 11 : Error - * b5 IP initilisation status - * 0 : Reset (IP not initialized) - * 1 : Init done (IP not initialized. HAL SMARTCARD Init function already called) - * b4-b3 (not used) - * xx : Should be set to 00 - * b2 Intrinsic process state - * 0 : Ready - * 1 : Busy (IP busy with some configuration or internal operations) - * b1 (not used) - * x : Should be set to 0 - * b0 Tx state - * 0 : Ready (no Tx operation ongoing) - * 1 : Busy (Tx operation ongoing) - * - RxState contains information related to Rx operations. - * RxState value coding follow below described bitmap : - * b7-b6 (not used) - * xx : Should be set to 00 - * b5 IP initilisation status - * 0 : Reset (IP not initialized) - * 1 : Init done (IP not initialized) - * b4-b2 (not used) - * xxx : Should be set to 000 - * b1 Rx state - * 0 : Ready (no Rx operation ongoing) - * 1 : Busy (Rx operation ongoing) - * b0 (not used) - * x : Should be set to 0. - */ -typedef enum -{ - HAL_SMARTCARD_STATE_RESET = 0x00U, /*!< Peripheral is not initialized - Value is allowed for gState and RxState */ - HAL_SMARTCARD_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use - Value is allowed for gState and RxState */ - HAL_SMARTCARD_STATE_BUSY = 0x24U, /*!< an internal process is ongoing - Value is allowed for gState only */ - HAL_SMARTCARD_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing - Value is allowed for gState only */ - HAL_SMARTCARD_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing - Value is allowed for RxState only */ - HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing - Not to be used for neither gState nor RxState. - Value is result of combination (Or) between gState and RxState values */ - HAL_SMARTCARD_STATE_TIMEOUT = 0xA0U, /*!< Timeout state - Value is allowed for gState only */ - HAL_SMARTCARD_STATE_ERROR = 0xE0U /*!< Error - Value is allowed for gState only */ -}HAL_SMARTCARD_StateTypeDef; - -/** - * @brief SMARTCARD clock sources - */ -typedef enum -{ - SMARTCARD_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ - SMARTCARD_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ - SMARTCARD_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ - SMARTCARD_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ - SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10U /*!< undefined clock source */ -}SMARTCARD_ClockSourceTypeDef; - -/** - * @brief SMARTCARD handle Structure definition - */ -typedef struct -{ - USART_TypeDef *Instance; /*!< USART registers base address */ - - SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */ - - SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /*!< SmartCard advanced features initialization parameters */ - - uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */ - - uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */ - - __IO uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */ - - uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */ - - uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */ - - __IO uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */ - - DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */ - - HAL_LockTypeDef Lock; /*!< Locking object */ - - __IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global Handle management - and also related to Tx operations. - This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */ - - __IO HAL_SMARTCARD_StateTypeDef RxState; /*!< SmartCard state information related to Rx operations. - This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */ - - __IO uint32_t ErrorCode; /*!< SmartCard Error code - This parameter can be a value of @ref SMARTCARD_Error */ - -}SMARTCARD_HandleTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported Constants - * @{ - */ - -/** @defgroup SMARTCARD_Error SMARTCARD Error - * @{ - */ -#define HAL_SMARTCARD_ERROR_NONE (0x00000000U) /*!< No error */ -#define HAL_SMARTCARD_ERROR_PE (0x00000001U) /*!< Parity error */ -#define HAL_SMARTCARD_ERROR_NE (0x00000002U) /*!< Noise error */ -#define HAL_SMARTCARD_ERROR_FE (0x00000004U) /*!< frame error */ -#define HAL_SMARTCARD_ERROR_ORE (0x00000008U) /*!< Overrun error */ -#define HAL_SMARTCARD_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ -#define HAL_SMARTCARD_ERROR_RTO (0x00000020U) /*!< Receiver TimeOut error */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length - * @{ - */ -#if defined (USART_CR1_M0) -#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M0) /*!< SMARTCARD frame length */ -#else -#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M) /*!< SMARTCARD frame length */ -#endif -/** - * @} - */ - -/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits - * @{ - */ -#define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0) /*!< SMARTCARD frame with 0.5 stop bit */ -#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1)) /*!< SMARTCARD frame with 1.5 stop bits */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Parity SMARTCARD Parity - * @{ - */ -#define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE) /*!< SMARTCARD frame even parity */ -#define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) /*!< SMARTCARD frame odd parity */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode - * @{ - */ -#define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE) /*!< SMARTCARD RX mode */ -#define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE) /*!< SMARTCARD TX mode */ -#define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) /*!< SMARTCARD RX and TX mode */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity - * @{ - */ -#define SMARTCARD_POLARITY_LOW (0x00000000U) /*!< SMARTCARD frame low polarity */ -#define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL) /*!< SMARTCARD frame high polarity */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase - * @{ - */ -#define SMARTCARD_PHASE_1EDGE (0x00000000U) /*!< SMARTCARD frame phase on first clock transition */ -#define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA) /*!< SMARTCARD frame phase on second clock transition */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit - * @{ - */ -#define SMARTCARD_LASTBIT_DISABLE (0x00000000U) /*!< SMARTCARD frame last data bit clock pulse not output to SCLK pin */ -#define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL) /*!< SMARTCARD frame last data bit clock pulse output to SCLK pin */ -/** - * @} - */ - -/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method - * @{ - */ -#define SMARTCARD_ONE_BIT_SAMPLE_DISABLE (0x00000000U) /*!< SMARTCARD frame one-bit sample disabled */ -#define SMARTCARD_ONE_BIT_SAMPLE_ENABLE ((uint32_t)USART_CR3_ONEBIT) /*!< SMARTCARD frame one-bit sample enabled */ -/** - * @} - */ - - -/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable - * @{ - */ -#define SMARTCARD_NACK_ENABLE ((uint32_t)USART_CR3_NACK) /*!< SMARTCARD NACK transmission disabled */ -#define SMARTCARD_NACK_DISABLE (0x00000000U) /*!< SMARTCARD NACK transmission enabled */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable - * @{ - */ -#define SMARTCARD_TIMEOUT_DISABLE (0x00000000U) /*!< SMARTCARD receiver timeout disabled */ -#define SMARTCARD_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN) /*!< SMARTCARD receiver timeout enabled */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Advanced_Features_Initialization_Type SMARTCARD advanced feature initialization type - * @{ - */ -#define SMARTCARD_ADVFEATURE_NO_INIT (0x00000000U) /*!< No advanced feature initialization */ -#define SMARTCARD_ADVFEATURE_TXINVERT_INIT (0x00000001U) /*!< TX pin active level inversion */ -#define SMARTCARD_ADVFEATURE_RXINVERT_INIT (0x00000002U) /*!< RX pin active level inversion */ -#define SMARTCARD_ADVFEATURE_DATAINVERT_INIT (0x00000004U) /*!< Binary data inversion */ -#define SMARTCARD_ADVFEATURE_SWAP_INIT (0x00000008U) /*!< TX/RX pins swap */ -#define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT (0x00000010U) /*!< RX overrun disable */ -#define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT (0x00000020U) /*!< DMA disable on Reception Error */ -#define SMARTCARD_ADVFEATURE_MSBFIRST_INIT (0x00000080U) /*!< Most significant bit sent/received first */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion - * @{ - */ -#define SMARTCARD_ADVFEATURE_TXINV_DISABLE (0x00000000U) /*!< TX pin active level inversion disable */ -#define SMARTCARD_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV) /*!< TX pin active level inversion enable */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion - * @{ - */ -#define SMARTCARD_ADVFEATURE_RXINV_DISABLE (0x00000000U) /*!< RX pin active level inversion disable */ -#define SMARTCARD_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV) /*!< RX pin active level inversion enable */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Data_Inv SMARTCARD advanced feature Binary Data inversion - * @{ - */ -#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE (0x00000000U) /*!< Binary data inversion disable */ -#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV) /*!< Binary data inversion enable */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap - * @{ - */ -#define SMARTCARD_ADVFEATURE_SWAP_DISABLE (0x00000000U) /*!< TX/RX pins swap disable */ -#define SMARTCARD_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP) /*!< TX/RX pins swap enable */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Overrun_Disable SMARTCARD advanced feature Overrun Disable - * @{ - */ -#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE (0x00000000U) /*!< RX overrun enable */ -#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS) /*!< RX overrun disable */ -/** - * @} - */ - -/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD advanced feature DMA Disable on Rx Error - * @{ - */ -#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR (0x00000000U) /*!< DMA enable on Reception Error */ -#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE) /*!< DMA disable on Reception Error */ -/** - * @} - */ - -/** @defgroup SMARTCARD_MSB_First SMARTCARD advanced feature MSB first - * @{ - */ -#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE (0x00000000U) /*!< Most significant bit sent/received first disable */ -#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST) /*!< Most significant bit sent/received first enable */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Flags SMARTCARD Flags - * Elements values convention: 0xXXXX - * - 0xXXXX : Flag mask in the ISR register - * @{ - */ -#define SMARTCARD_FLAG_REACK USART_ISR_REACK /*!< SMARTCARD receive enable acknowledge flag */ -#define SMARTCARD_FLAG_TEACK USART_ISR_TEACK /*!< SMARTCARD transmit enable acknowledge flag */ -#define SMARTCARD_FLAG_BUSY USART_ISR_BUSY /*!< SMARTCARD busy flag */ -#define SMARTCARD_FLAG_EOBF USART_ISR_EOBF /*!< SMARTCARD end of block flag */ -#define SMARTCARD_FLAG_RTOF USART_ISR_RTOF /*!< SMARTCARD receiver timeout flag */ -#define SMARTCARD_FLAG_TXE USART_ISR_TXE /*!< SMARTCARD transmit data register empty */ -#define SMARTCARD_FLAG_TC USART_ISR_TC /*!< SMARTCARD transmission complete */ -#define SMARTCARD_FLAG_RXNE USART_ISR_RXNE /*!< SMARTCARD read data register not empty */ -#define SMARTCARD_FLAG_IDLE USART_ISR_IDLE /*!< SMARTCARD idle line detection */ -#define SMARTCARD_FLAG_ORE USART_ISR_ORE /*!< SMARTCARD overrun error */ -#define SMARTCARD_FLAG_NE USART_ISR_NE /*!< SMARTCARD noise error */ -#define SMARTCARD_FLAG_FE USART_ISR_FE /*!< SMARTCARD frame error */ -#define SMARTCARD_FLAG_PE USART_ISR_PE /*!< SMARTCARD parity error */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Interrupt_definition SMARTCARD Interrupts Definition - * Elements values convention: 0000ZZZZ0XXYYYYYb - * - YYYYY : Interrupt source position in the XX register (5bits) - * - XX : Interrupt source register (2bits) - * - 01: CR1 register - * - 10: CR2 register - * - 11: CR3 register - * - ZZZZ : Flag position in the ISR register(4bits) - * @{ - */ - -#define SMARTCARD_IT_PE ((uint16_t)0x0028U) /*!< SMARTCARD parity error interruption */ -#define SMARTCARD_IT_TXE ((uint16_t)0x0727U) /*!< SMARTCARD transmit data register empty interruption */ -#define SMARTCARD_IT_TC ((uint16_t)0x0626U) /*!< SMARTCARD transmission complete interruption */ -#define SMARTCARD_IT_RXNE ((uint16_t)0x0525U) /*!< SMARTCARD read data register not empty interruption */ -#define SMARTCARD_IT_IDLE ((uint16_t)0x0424U) /*!< SMARTCARD idle line detection interruption */ - -#define SMARTCARD_IT_ERR ((uint16_t)0x0060U) /*!< SMARTCARD error interruption */ -#define SMARTCARD_IT_ORE ((uint16_t)0x0300U) /*!< SMARTCARD overrun error interruption */ -#define SMARTCARD_IT_NE ((uint16_t)0x0200U) /*!< SMARTCARD noise error interruption */ -#define SMARTCARD_IT_FE ((uint16_t)0x0100U) /*!< SMARTCARD frame error interruption */ - -#define SMARTCARD_IT_EOB ((uint16_t)0x0C3BU) /*!< SMARTCARD end of block interruption */ -#define SMARTCARD_IT_RTO ((uint16_t)0x0B3AU) /*!< SMARTCARD receiver timeout interruption */ -/** - * @} - */ - -/** @defgroup SMARTCARD_IT_CLEAR_Flags SMARTCARD Interruption Clear Flags - * @{ - */ -#define SMARTCARD_CLEAR_PEF USART_ICR_PECF /*!< SMARTCARD parity error clear flag */ -#define SMARTCARD_CLEAR_FEF USART_ICR_FECF /*!< SMARTCARD framing error clear flag */ -#define SMARTCARD_CLEAR_NEF USART_ICR_NCF /*!< SMARTCARD noise detected clear flag */ -#define SMARTCARD_CLEAR_OREF USART_ICR_ORECF /*!< SMARTCARD overrun error clear flag */ -#define SMARTCARD_CLEAR_IDLEF USART_ICR_IDLECF /*!< SMARTCARD idle line detected clear flag */ -#define SMARTCARD_CLEAR_TCF USART_ICR_TCCF /*!< SMARTCARD transmission complete clear flag */ -#define SMARTCARD_CLEAR_RTOF USART_ICR_RTOCF /*!< SMARTCARD receiver time out clear flag */ -#define SMARTCARD_CLEAR_EOBF USART_ICR_EOBCF /*!< SMARTCARD end of block clear flag */ -/** - * @} - */ - -/** @defgroup SMARTCARD_CR3_SCARCNT_LSB_POS SMARTCARD auto retry counter LSB position in CR3 register - * @{ - */ -#define SMARTCARD_CR3_SCARCNT_LSB_POS ( 17U) /*!< SMARTCARD auto retry counter LSB position in CR3 register */ -/** - * @} - */ - -/** @defgroup SMARTCARD_GTPR_GT_LSB_POS SMARTCARD guard time value LSB position in GTPR register - * @{ - */ -#define SMARTCARD_GTPR_GT_LSB_POS ( 8U) /*!< SMARTCARD guard time value LSB position in GTPR register */ -/** - * @} - */ - -/** @defgroup SMARTCARD_RTOR_BLEN_LSB_POS SMARTCARD block length LSB position in RTOR register - * @{ - */ -#define SMARTCARD_RTOR_BLEN_LSB_POS ( 24U) /*!< SMARTCARD block length LSB position in RTOR register */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Interruption_Mask SMARTCARD interruptions flags mask - * @{ - */ -#define SMARTCARD_IT_MASK ((uint16_t)0x001FU) /*!< SMARTCARD interruptions flags mask */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters - * @{ - */ -#define SMARTCARD_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive data flush request */ -#define SMARTCARD_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush request */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros - * @{ - */ - -/** @brief Reset SMARTCARD handle states. - * @param __HANDLE__ SMARTCARD handle. - * @retval None - */ -#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \ - (__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \ - } while(0U) - -/** @brief Flush the Smartcard Data registers. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @retval None - */ -#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) \ - do{ \ - SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_RXDATA_FLUSH_REQUEST); \ - SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_TXDATA_FLUSH_REQUEST); \ - } while(0U) - -/** @brief Clear the specified SMARTCARD pending flag. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be any combination of the following values: - * @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag - * @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag - * @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag - * @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag - * @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detected clear flag - * @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag - * @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag - * @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag - * @retval None - */ -#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) - -/** @brief Clear the SMARTCARD PE pending flag. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @retval None - */ -#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_PEF) - - -/** @brief Clear the SMARTCARD FE pending flag. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @retval None - */ -#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_FEF) - -/** @brief Clear the SMARTCARD NE pending flag. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @retval None - */ -#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_NEF) - -/** @brief Clear the SMARTCARD ORE pending flag. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @retval None - */ -#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_OREF) - -/** @brief Clear the SMARTCARD IDLE pending flag. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @retval None - */ -#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_IDLEF) - -/** @brief Check whether the specified Smartcard flag is set or not. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg @ref SMARTCARD_FLAG_REACK Receive enable acknowledge flag - * @arg @ref SMARTCARD_FLAG_TEACK Transmit enable acknowledge flag - * @arg @ref SMARTCARD_FLAG_BUSY Busy flag - * @arg @ref SMARTCARD_FLAG_EOBF End of block flag - * @arg @ref SMARTCARD_FLAG_RTOF Receiver timeout flag - * @arg @ref SMARTCARD_FLAG_TXE Transmit data register empty flag - * @arg @ref SMARTCARD_FLAG_TC Transmission complete flag - * @arg @ref SMARTCARD_FLAG_RXNE Receive data register not empty flag - * @arg @ref SMARTCARD_FLAG_IDLE Idle line detection flag - * @arg @ref SMARTCARD_FLAG_ORE Overrun error flag - * @arg @ref SMARTCARD_FLAG_NE Noise error flag - * @arg @ref SMARTCARD_FLAG_FE Framing error flag - * @arg @ref SMARTCARD_FLAG_PE Parity error flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) - - -/** @brief Enable the specified SmartCard interrupt. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @param __INTERRUPT__ specifies the SMARTCARD interrupt to enable. - * This parameter can be one of the following values: - * @arg @ref SMARTCARD_IT_EOB End of block interrupt - * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt - * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt - * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt - * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt - * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt - * @arg @ref SMARTCARD_IT_PE Parity error interrupt - * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & 0xFFU) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ - ((((__INTERRUPT__) & 0xFFU) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ - ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK)))) - -/** @brief Disable the specified SmartCard interrupt. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @param __INTERRUPT__ specifies the SMARTCARD interrupt to disable. - * This parameter can be one of the following values: - * @arg @ref SMARTCARD_IT_EOB End of block interrupt - * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt - * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt - * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt - * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt - * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt - * @arg @ref SMARTCARD_IT_PE Parity error interrupt - * @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & 0xFFU) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ - ((((__INTERRUPT__) & 0xFFU) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \ - ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK)))) - - -/** @brief Check whether the specified SmartCard interrupt has occurred or not. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @param __IT__ specifies the SMARTCARD interrupt to check. - * This parameter can be one of the following values: - * @arg @ref SMARTCARD_IT_EOB End of block interrupt - * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt - * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt - * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt - * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt - * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt - * @arg @ref SMARTCARD_IT_ORE Overrun error interrupt - * @arg @ref SMARTCARD_IT_NE Noise error interrupt - * @arg @ref SMARTCARD_IT_FE Framing error interrupt - * @arg @ref SMARTCARD_IT_PE Parity error interrupt - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & (1U << ((__IT__)>> 0x08U))) - -/** @brief Check whether the specified SmartCard interrupt source is enabled or not. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @param __IT__ specifies the SMARTCARD interrupt source to check. - * This parameter can be one of the following values: - * @arg @ref SMARTCARD_IT_EOB End of block interrupt - * @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt - * @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt - * @arg @ref SMARTCARD_IT_TC Transmission complete interrupt - * @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt - * @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt - * @arg @ref SMARTCARD_IT_ERR Framing, overrun or noise error interrupt - * @arg @ref SMARTCARD_IT_PE Parity error interrupt - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((__IT__) & 0xFFU) >> 5U) == 1U)? (__HANDLE__)->Instance->CR1 : \ - (((((__IT__) & 0xFFU) >> 5U) == 2U)? (__HANDLE__)->Instance->CR2 : \ - (__HANDLE__)->Instance->CR3)) & (1U << (((uint16_t)(__IT__)) & SMARTCARD_IT_MASK))) - - -/** @brief Clear the specified SMARTCARD ISR flag, in setting the proper ICR register flag. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set - * to clear the corresponding interrupt. - * This parameter can be one of the following values: - * @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag - * @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag - * @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag - * @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag - * @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detection clear flag - * @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag - * @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag - * @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag - * @retval None - */ -#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) - -/** @brief Set a specific SMARTCARD request flag. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @param __REQ__ specifies the request flag to set - * This parameter can be one of the following values: - * @arg @ref SMARTCARD_RXDATA_FLUSH_REQUEST Receive data flush Request - * @arg @ref SMARTCARD_TXDATA_FLUSH_REQUEST Transmit data flush Request - * - * @retval None - */ -#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) - -/** @brief Enable the SMARTCARD one bit sample method. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @retval None - */ -#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) - -/** @brief Disable the SMARTCARD one bit sample method. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @retval None - */ -#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT)) - -/** @brief Enable the USART associated to the SMARTCARD Handle. - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @retval None - */ -#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) - -/** @brief Disable the USART associated to the SMARTCARD Handle - * @param __HANDLE__ specifies the SMARTCARD Handle. - * @retval None - */ -#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) - -/** - * @} - */ - -/* Private macros -------------------------------------------------------------*/ -/** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros - * @{ - */ - -/** @brief Check the Baud rate range. - * @note The maximum Baud Rate is derived from the maximum clock on F0 (48 MHz) - * divided by the oversampling used on the SMARTCARD (i.e. 16). - * @param __BAUDRATE__ Baud rate set by the configuration function. - * @retval Test result (TRUE or FALSE) - */ -#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 3000001U) - -/** @brief Check the block length range. - * @note The maximum SMARTCARD block length is 0xFF. - * @param __LENGTH__ block length. - * @retval Test result (TRUE or FALSE) - */ -#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFFU) - -/** @brief Check the receiver timeout value. - * @note The maximum SMARTCARD receiver timeout value is 0xFFFFFF. - * @param __TIMEOUTVALUE__ receiver timeout value. - * @retval Test result (TRUE or FALSE) - */ -#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU) - -/** @brief Check the SMARTCARD autoretry counter value. - * @note The maximum number of retransmissions is 0x7. - * @param __COUNT__ number of retransmissions. - * @retval Test result (TRUE or FALSE) - */ -#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7U) - -/** - * @brief Ensure that SMARTCARD frame length is valid. - * @param __LENGTH__ SMARTCARD frame length. - * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) - */ -#define IS_SMARTCARD_WORD_LENGTH(__LENGTH__) ((__LENGTH__) == SMARTCARD_WORDLENGTH_9B) - -/** - * @brief Ensure that SMARTCARD frame number of stop bits is valid. - * @param __STOPBITS__ SMARTCARD frame number of stop bits. - * @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid) - */ -#define IS_SMARTCARD_STOPBITS(__STOPBITS__) (((__STOPBITS__) == SMARTCARD_STOPBITS_0_5) ||\ - ((__STOPBITS__) == SMARTCARD_STOPBITS_1_5)) - -/** - * @brief Ensure that SMARTCARD frame parity is valid. - * @param __PARITY__ SMARTCARD frame parity. - * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) - */ -#define IS_SMARTCARD_PARITY(__PARITY__) (((__PARITY__) == SMARTCARD_PARITY_EVEN) || \ - ((__PARITY__) == SMARTCARD_PARITY_ODD)) - -/** - * @brief Ensure that SMARTCARD communication mode is valid. - * @param __MODE__ SMARTCARD communication mode. - * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) - */ -#define IS_SMARTCARD_MODE(__MODE__) ((((__MODE__) & (uint16_t)0xFFF3U) == 0x00U) && ((__MODE__) != (uint16_t)0x00U)) - -/** - * @brief Ensure that SMARTCARD frame polarity is valid. - * @param __CPOL__ SMARTCARD frame polarity. - * @retval SET (__CPOL__ is valid) or RESET (__CPOL__ is invalid) - */ -#define IS_SMARTCARD_POLARITY(__CPOL__) (((__CPOL__) == SMARTCARD_POLARITY_LOW) || ((__CPOL__) == SMARTCARD_POLARITY_HIGH)) - -/** - * @brief Ensure that SMARTCARD frame phase is valid. - * @param __CPHA__ SMARTCARD frame phase. - * @retval SET (__CPHA__ is valid) or RESET (__CPHA__ is invalid) - */ -#define IS_SMARTCARD_PHASE(__CPHA__) (((__CPHA__) == SMARTCARD_PHASE_1EDGE) || ((__CPHA__) == SMARTCARD_PHASE_2EDGE)) - -/** - * @brief Ensure that SMARTCARD frame last bit clock pulse setting is valid. - * @param __LASTBIT__ SMARTCARD frame last bit clock pulse setting. - * @retval SET (__LASTBIT__ is valid) or RESET (__LASTBIT__ is invalid) - */ -#define IS_SMARTCARD_LASTBIT(__LASTBIT__) (((__LASTBIT__) == SMARTCARD_LASTBIT_DISABLE) || \ - ((__LASTBIT__) == SMARTCARD_LASTBIT_ENABLE)) - -/** - * @brief Ensure that SMARTCARD frame sampling is valid. - * @param __ONEBIT__ SMARTCARD frame sampling. - * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) - */ -#define IS_SMARTCARD_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_DISABLE) || \ - ((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_ENABLE)) - -/** - * @brief Ensure that SMARTCARD NACK transmission setting is valid. - * @param __NACK__ SMARTCARD NACK transmission setting. - * @retval SET (__NACK__ is valid) or RESET (__NACK__ is invalid) - */ -#define IS_SMARTCARD_NACK(__NACK__) (((__NACK__) == SMARTCARD_NACK_ENABLE) || \ - ((__NACK__) == SMARTCARD_NACK_DISABLE)) - -/** - * @brief Ensure that SMARTCARD receiver timeout setting is valid. - * @param __TIMEOUT__ SMARTCARD receiver timeout setting. - * @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid) - */ -#define IS_SMARTCARD_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == SMARTCARD_TIMEOUT_DISABLE) || \ - ((__TIMEOUT__) == SMARTCARD_TIMEOUT_ENABLE)) - -/** - * @brief Ensure that SMARTCARD advanced features initialization is valid. - * @param __INIT__ SMARTCARD advanced features initialization. - * @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid) - */ -#define IS_SMARTCARD_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (SMARTCARD_ADVFEATURE_NO_INIT | \ - SMARTCARD_ADVFEATURE_TXINVERT_INIT | \ - SMARTCARD_ADVFEATURE_RXINVERT_INIT | \ - SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \ - SMARTCARD_ADVFEATURE_SWAP_INIT | \ - SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ - SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT | \ - SMARTCARD_ADVFEATURE_MSBFIRST_INIT)) - -/** - * @brief Ensure that SMARTCARD frame TX inversion setting is valid. - * @param __TXINV__ SMARTCARD frame TX inversion setting. - * @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid) - */ -#define IS_SMARTCARD_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \ - ((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_ENABLE)) - -/** - * @brief Ensure that SMARTCARD frame RX inversion setting is valid. - * @param __RXINV__ SMARTCARD frame RX inversion setting. - * @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid) - */ -#define IS_SMARTCARD_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \ - ((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_ENABLE)) - -/** - * @brief Ensure that SMARTCARD frame data inversion setting is valid. - * @param __DATAINV__ SMARTCARD frame data inversion setting. - * @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid) - */ -#define IS_SMARTCARD_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \ - ((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE)) - -/** - * @brief Ensure that SMARTCARD frame RX/TX pins swap setting is valid. - * @param __SWAP__ SMARTCARD frame RX/TX pins swap setting. - * @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid) - */ -#define IS_SMARTCARD_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \ - ((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_ENABLE)) - -/** - * @brief Ensure that SMARTCARD frame overrun setting is valid. - * @param __OVERRUN__ SMARTCARD frame overrun setting. - * @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid) - */ -#define IS_SMARTCARD_OVERRUN(__OVERRUN__) (((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \ - ((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE)) - -/** - * @brief Ensure that SMARTCARD DMA enabling or disabling on error setting is valid. - * @param __DMA__ SMARTCARD DMA enabling or disabling on error setting. - * @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid) - */ -#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \ - ((__DMA__) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR)) - -/** - * @brief Ensure that SMARTCARD frame MSB first setting is valid. - * @param __MSBFIRST__ SMARTCARD frame MSB first setting. - * @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid) - */ -#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \ - ((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE)) - -/** - * @brief Ensure that SMARTCARD request parameter is valid. - * @param __PARAM__ SMARTCARD request parameter. - * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) - */ -#define IS_SMARTCARD_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \ - ((__PARAM__) == SMARTCARD_TXDATA_FLUSH_REQUEST)) - -/** - * @} - */ - -/* Include SMARTCARD HAL Extended module */ -#include "stm32f0xx_hal_smartcard_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SMARTCARD_Exported_Functions - * @{ - */ - -/* Initialization and de-initialization functions ****************************/ - -/** @addtogroup SMARTCARD_Exported_Functions_Group1 - * @{ - */ - -HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard); -HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard); -void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard); -void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard); - -/** - * @} - */ - -/* IO operation functions *****************************************************/ -/** @addtogroup SMARTCARD_Exported_Functions_Group2 - * @{ - */ - -HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size); -/* Transfer Abort functions */ -HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard); -HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard); -HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard); -HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard); -HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard); -HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard); - -void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard); -void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); -void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard); -void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard); -void HAL_SMARTCARD_AbortCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard); -void HAL_SMARTCARD_AbortTransmitCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard); -void HAL_SMARTCARD_AbortReceiveCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard); - -/** - * @} - */ - -/* Peripheral State and Error functions ***************************************/ -/** @addtogroup SMARTCARD_Exported_Functions_Group3 - * @{ - */ - -HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard); -uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F0xx_HAL_SMARTCARD_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - |