diff options
Diffstat (limited to 'lib/hal-stm32f0/include/stm32f0xx_hal_irda.h')
| -rw-r--r-- | lib/hal-stm32f0/include/stm32f0xx_hal_irda.h | 792 |
1 files changed, 0 insertions, 792 deletions
diff --git a/lib/hal-stm32f0/include/stm32f0xx_hal_irda.h b/lib/hal-stm32f0/include/stm32f0xx_hal_irda.h deleted file mode 100644 index 6df14dd5..00000000 --- a/lib/hal-stm32f0/include/stm32f0xx_hal_irda.h +++ /dev/null @@ -1,792 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_irda.h - * @author MCD Application Team - * @brief This file contains all the functions prototypes for the IRDA - * firmware library. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F0xx_HAL_IRDA_H -#define __STM32F0xx_HAL_IRDA_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_hal_def.h" - -/** @addtogroup STM32F0xx_HAL_Driver - * @{ - */ - -/** @addtogroup IRDA - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup IRDA_Exported_Types IRDA Exported Types - * @{ - */ - -/** - * @brief IRDA Init Structure definition - */ -typedef struct -{ - uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate. - The baud rate register is computed using the following formula: - Baud Rate Register = ((PCLKx) / ((hirda->Init.BaudRate))) */ - - uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. - This parameter can be a value of @ref IRDAEx_Word_Length */ - - uint32_t Parity; /*!< Specifies the parity mode. - This parameter can be a value of @ref IRDA_Parity - @note When parity is enabled, the computed parity is inserted - at the MSB position of the transmitted data (9th bit when - the word length is set to 9 data bits; 8th bit when the - word length is set to 8 data bits). */ - - uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. - This parameter can be a value of @ref IRDA_Transfer_Mode */ - - uint8_t Prescaler; /*!< Specifies the Prescaler value for dividing the UART/USART source clock - to achieve low-power frequency. - @note Prescaler value 0 is forbidden */ - - uint16_t PowerMode; /*!< Specifies the IRDA power mode. - This parameter can be a value of @ref IRDA_Low_Power */ -}IRDA_InitTypeDef; - -/** - * @brief HAL IRDA State structures definition - * @note HAL IRDA State value is a combination of 2 different substates: gState and RxState. - * - gState contains IRDA state information related to global Handle management - * and also information related to Tx operations. - * gState value coding follow below described bitmap : - * b7-b6 Error information - * 00 : No Error - * 01 : (Not Used) - * 10 : Timeout - * 11 : Error - * b5 IP initilisation status - * 0 : Reset (IP not initialized) - * 1 : Init done (IP not initialized. HAL IRDA Init function already called) - * b4-b3 (not used) - * xx : Should be set to 00 - * b2 Intrinsic process state - * 0 : Ready - * 1 : Busy (IP busy with some configuration or internal operations) - * b1 (not used) - * x : Should be set to 0 - * b0 Tx state - * 0 : Ready (no Tx operation ongoing) - * 1 : Busy (Tx operation ongoing) - * - RxState contains information related to Rx operations. - * RxState value coding follow below described bitmap : - * b7-b6 (not used) - * xx : Should be set to 00 - * b5 IP initilisation status - * 0 : Reset (IP not initialized) - * 1 : Init done (IP not initialized) - * b4-b2 (not used) - * xxx : Should be set to 000 - * b1 Rx state - * 0 : Ready (no Rx operation ongoing) - * 1 : Busy (Rx operation ongoing) - * b0 (not used) - * x : Should be set to 0. - */ -typedef enum -{ - HAL_IRDA_STATE_RESET = 0x00U, /*!< Peripheral is not initialized - Value is allowed for gState and RxState */ - HAL_IRDA_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use - Value is allowed for gState and RxState */ - HAL_IRDA_STATE_BUSY = 0x24U, /*!< an internal process is ongoing - Value is allowed for gState only */ - HAL_IRDA_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing - Value is allowed for gState only */ - HAL_IRDA_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing - Value is allowed for RxState only */ - HAL_IRDA_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing - Not to be used for neither gState nor RxState. - Value is result of combination (Or) between gState and RxState values */ - HAL_IRDA_STATE_TIMEOUT = 0xA0U, /*!< Timeout state - Value is allowed for gState only */ - HAL_IRDA_STATE_ERROR = 0xE0U /*!< Error - Value is allowed for gState only */ -}HAL_IRDA_StateTypeDef; - -/** - * @brief IRDA clock sources definition - */ -typedef enum -{ - IRDA_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ - IRDA_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ - IRDA_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ - IRDA_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ - IRDA_CLOCKSOURCE_UNDEFINED = 0x10U /*!< Undefined clock source */ -}IRDA_ClockSourceTypeDef; - -/** - * @brief IRDA handle Structure definition - */ -typedef struct -{ - USART_TypeDef *Instance; /*!< IRDA registers base address */ - - IRDA_InitTypeDef Init; /*!< IRDA communication parameters */ - - uint8_t *pTxBuffPtr; /*!< Pointer to IRDA Tx transfer Buffer */ - - uint16_t TxXferSize; /*!< IRDA Tx Transfer size */ - - __IO uint16_t TxXferCount; /*!< IRDA Tx Transfer Counter */ - - uint8_t *pRxBuffPtr; /*!< Pointer to IRDA Rx transfer Buffer */ - - uint16_t RxXferSize; /*!< IRDA Rx Transfer size */ - - __IO uint16_t RxXferCount; /*!< IRDA Rx Transfer Counter */ - - uint16_t Mask; /*!< IRDA RX RDR register mask */ - - DMA_HandleTypeDef *hdmatx; /*!< IRDA Tx DMA Handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< IRDA Rx DMA Handle parameters */ - - HAL_LockTypeDef Lock; /*!< Locking object */ - - __IO HAL_IRDA_StateTypeDef gState; /*!< IRDA state information related to global Handle management - and also related to Tx operations. - This parameter can be a value of @ref HAL_IRDA_StateTypeDef */ - - __IO HAL_IRDA_StateTypeDef RxState; /*!< IRDA state information related to Rx operations. - This parameter can be a value of @ref HAL_IRDA_StateTypeDef */ - - __IO uint32_t ErrorCode; /*!< IRDA Error code - This parameter can be a value of @ref IRDA_Error */ - -}IRDA_HandleTypeDef; - -/** - * @brief IRDA Configuration enumeration values definition - */ -typedef enum -{ - IRDA_BAUDRATE = 0x00U, /*!< IRDA Baud rate */ - IRDA_PARITY = 0x01U, /*!< IRDA frame parity */ - IRDA_WORDLENGTH = 0x02U, /*!< IRDA frame length */ - IRDA_MODE = 0x03U, /*!< IRDA communication mode */ - IRDA_PRESCALER = 0x04U, /*!< IRDA prescaling */ - IRDA_POWERMODE = 0x05U /*!< IRDA power mode */ -}IRDA_ControlTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup IRDA_Exported_Constants IRDA Exported Constants - * @{ - */ - -/** @defgroup IRDA_Error IRDA Error - * @{ - */ -#define HAL_IRDA_ERROR_NONE (0x00000000U) /*!< No error */ -#define HAL_IRDA_ERROR_PE (0x00000001U) /*!< Parity error */ -#define HAL_IRDA_ERROR_NE (0x00000002U) /*!< Noise error */ -#define HAL_IRDA_ERROR_FE (0x00000004U) /*!< frame error */ -#define HAL_IRDA_ERROR_ORE (0x00000008U) /*!< Overrun error */ -#define HAL_IRDA_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ -#define HAL_IRDA_ERROR_BUSY (0x00000020U) /*!< Busy Error */ -/** - * @} - */ - -/** @defgroup IRDA_Parity IRDA Parity - * @{ - */ -#define IRDA_PARITY_NONE (0x00000000U) /*!< No parity */ -#define IRDA_PARITY_EVEN ((uint32_t)USART_CR1_PCE) /*!< Even parity */ -#define IRDA_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) /*!< Odd parity */ -/** - * @} - */ - -/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode - * @{ - */ -#define IRDA_MODE_RX ((uint32_t)USART_CR1_RE) /*!< RX mode */ -#define IRDA_MODE_TX ((uint32_t)USART_CR1_TE) /*!< TX mode */ -#define IRDA_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) /*!< RX and TX mode */ -/** - * @} - */ - -/** @defgroup IRDA_Low_Power IRDA Low Power - * @{ - */ -#define IRDA_POWERMODE_NORMAL (0x00000000U) /*!< IRDA normal power mode */ -#define IRDA_POWERMODE_LOWPOWER ((uint32_t)USART_CR3_IRLP) /*!< IRDA low power mode */ -/** - * @} - */ - -/** @defgroup IRDA_State IRDA State - * @{ - */ -#define IRDA_STATE_DISABLE (0x00000000U) /*!< IRDA disabled */ -#define IRDA_STATE_ENABLE ((uint32_t)USART_CR1_UE) /*!< IRDA enabled */ -/** - * @} - */ - -/** @defgroup IRDA_Mode IRDA Mode - * @{ - */ -#define IRDA_MODE_DISABLE (0x00000000U) /*!< Associated UART disabled in IRDA mode */ -#define IRDA_MODE_ENABLE ((uint32_t)USART_CR3_IREN) /*!< Associated UART enabled in IRDA mode */ -/** - * @} - */ - -/** @defgroup IRDA_One_Bit IRDA One Bit Sampling - * @{ - */ -#define IRDA_ONE_BIT_SAMPLE_DISABLE (0x00000000U) /*!< One-bit sampling disabled */ -#define IRDA_ONE_BIT_SAMPLE_ENABLE ((uint32_t)USART_CR3_ONEBIT) /*!< One-bit sampling enabled */ -/** - * @} - */ - -/** @defgroup IRDA_DMA_Tx IRDA DMA Tx - * @{ - */ -#define IRDA_DMA_TX_DISABLE (0x00000000U) /*!< IRDA DMA TX disabled */ -#define IRDA_DMA_TX_ENABLE ((uint32_t)USART_CR3_DMAT) /*!< IRDA DMA TX enabled */ -/** - * @} - */ - -/** @defgroup IRDA_DMA_Rx IRDA DMA Rx - * @{ - */ -#define IRDA_DMA_RX_DISABLE (0x00000000U) /*!< IRDA DMA RX disabled */ -#define IRDA_DMA_RX_ENABLE ((uint32_t)USART_CR3_DMAR) /*!< IRDA DMA RX enabled */ -/** - * @} - */ - -/** @defgroup IRDA_Request_Parameters IRDA Request Parameters - * @{ - */ -#define IRDA_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */ -#define IRDA_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */ -#define IRDA_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */ -/** - * @} - */ - -/** @defgroup IRDA_Flags IRDA Flags - * Elements values convention: 0xXXXX - * - 0xXXXX : Flag mask in the ISR register - * @{ - */ -#define IRDA_FLAG_REACK (0x00400000U) /*!< IRDA Receive enable acknowledge flag */ -#define IRDA_FLAG_TEACK (0x00200000U) /*!< IRDA Transmit enable acknowledge flag */ -#define IRDA_FLAG_BUSY (0x00010000U) /*!< IRDA Busy flag */ -#define IRDA_FLAG_ABRF (0x00008000U) /*!< IRDA Auto baud rate flag */ -#define IRDA_FLAG_ABRE (0x00004000U) /*!< IRDA Auto baud rate error */ -#define IRDA_FLAG_TXE (0x00000080U) /*!< IRDA Transmit data register empty */ -#define IRDA_FLAG_TC (0x00000040U) /*!< IRDA Transmission complete */ -#define IRDA_FLAG_RXNE (0x00000020U) /*!< IRDA Read data register not empty */ -#define IRDA_FLAG_ORE (0x00000008U) /*!< IRDA Overrun error */ -#define IRDA_FLAG_NE (0x00000004U) /*!< IRDA Noise error */ -#define IRDA_FLAG_FE (0x00000002U) /*!< IRDA Framing error */ -#define IRDA_FLAG_PE (0x00000001U) /*!< IRDA Parity error */ -/** - * @} - */ - -/** @defgroup IRDA_Interrupt_definition IRDA Interrupts Definition - * Elements values convention: 0000ZZZZ0XXYYYYYb - * - YYYYY : Interrupt source position in the XX register (5bits) - * - XX : Interrupt source register (2bits) - * - 01: CR1 register - * - 10: CR2 register - * - 11: CR3 register - * - ZZZZ : Flag position in the ISR register(4bits) - * @{ - */ -#define IRDA_IT_PE ((uint16_t)0x0028U) /*!< IRDA Parity error interruption */ -#define IRDA_IT_TXE ((uint16_t)0x0727U) /*!< IRDA Transmit data register empty interruption */ -#define IRDA_IT_TC ((uint16_t)0x0626U) /*!< IRDA Transmission complete interruption */ -#define IRDA_IT_RXNE ((uint16_t)0x0525U) /*!< IRDA Read data register not empty interruption */ -#define IRDA_IT_IDLE ((uint16_t)0x0424U) /*!< IRDA Idle interruption */ -#define IRDA_IT_ERR ((uint16_t)0x0060U) /*!< IRDA Error interruption */ -#define IRDA_IT_ORE ((uint16_t)0x0300U) /*!< IRDA Overrun error interruption */ -#define IRDA_IT_NE ((uint16_t)0x0200U) /*!< IRDA Noise error interruption */ -#define IRDA_IT_FE ((uint16_t)0x0100U) /*!< IRDA Frame error interruption */ -/** - * @} - */ - -/** @defgroup IRDA_IT_CLEAR_Flags IRDA Interruption Clear Flags - * @{ - */ -#define IRDA_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ -#define IRDA_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ -#define IRDA_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */ -#define IRDA_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ -#define IRDA_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ -#define IRDA_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ -/** - * @} - */ - -/** @defgroup IRDA_Interruption_Mask IRDA interruptions flags mask - * @{ - */ -#define IRDA_IT_MASK ((uint16_t)0x001FU) /*!< IRDA Interruptions flags mask */ -/** - * @} - */ - -/** - * @} - */ - - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup IRDA_Exported_Macros IRDA Exported Macros - * @{ - */ - -/** @brief Reset IRDA handle state. - * @param __HANDLE__ IRDA handle. - * @retval None - */ -#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) do{ \ - (__HANDLE__)->gState = HAL_IRDA_STATE_RESET; \ - (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET; \ - } while(0) - -/** @brief Flush the IRDA DR register. - * @param __HANDLE__ specifies the IRDA Handle. - * @retval None - */ -#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) \ - do{ \ - SET_BIT((__HANDLE__)->Instance->RQR, IRDA_RXDATA_FLUSH_REQUEST); \ - SET_BIT((__HANDLE__)->Instance->RQR, IRDA_TXDATA_FLUSH_REQUEST); \ - } while(0) - -/** @brief Clear the specified IRDA pending flag. - * @param __HANDLE__ specifies the IRDA Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be any combination of the following values: - * @arg @ref IRDA_CLEAR_PEF - * @arg @ref IRDA_CLEAR_FEF - * @arg @ref IRDA_CLEAR_NEF - * @arg @ref IRDA_CLEAR_OREF - * @arg @ref IRDA_CLEAR_TCF - * @arg @ref IRDA_CLEAR_IDLEF - * @retval None - */ -#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) - -/** @brief Clear the IRDA PE pending flag. - * @param __HANDLE__ specifies the IRDA Handle. - * @retval None - */ -#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_PEF) - - -/** @brief Clear the IRDA FE pending flag. - * @param __HANDLE__ specifies the IRDA Handle. - * @retval None - */ -#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_FEF) - -/** @brief Clear the IRDA NE pending flag. - * @param __HANDLE__ specifies the IRDA Handle. - * @retval None - */ -#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_NEF) - -/** @brief Clear the IRDA ORE pending flag. - * @param __HANDLE__ specifies the IRDA Handle. - * @retval None - */ -#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_OREF) - -/** @brief Clear the IRDA IDLE pending flag. - * @param __HANDLE__ specifies the IRDA Handle. - * @retval None - */ -#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_IDLEF) - -/** @brief Check whether the specified IRDA flag is set or not. - * @param __HANDLE__ specifies the IRDA Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg @ref IRDA_FLAG_REACK Receive enable acknowledge flag - * @arg @ref IRDA_FLAG_TEACK Transmit enable acknowledge flag - * @arg @ref IRDA_FLAG_BUSY Busy flag - * @arg @ref IRDA_FLAG_ABRF Auto Baud rate detection flag - * @arg @ref IRDA_FLAG_ABRE Auto Baud rate detection error flag - * @arg @ref IRDA_FLAG_TXE Transmit data register empty flag - * @arg @ref IRDA_FLAG_TC Transmission Complete flag - * @arg @ref IRDA_FLAG_RXNE Receive data register not empty flag - * @arg @ref IRDA_FLAG_ORE OverRun Error flag - * @arg @ref IRDA_FLAG_NE Noise Error flag - * @arg @ref IRDA_FLAG_FE Framing Error flag - * @arg @ref IRDA_FLAG_PE Parity Error flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) - - -/** @brief Enable the specified IRDA interrupt. - * @param __HANDLE__ specifies the IRDA Handle. - * @param __INTERRUPT__ specifies the IRDA interrupt source to enable. - * This parameter can be one of the following values: - * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt - * @arg @ref IRDA_IT_TC Transmission complete interrupt - * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt - * @arg @ref IRDA_IT_IDLE Idle line detection interrupt - * @arg @ref IRDA_IT_PE Parity Error interrupt - * @arg @ref IRDA_IT_ERR Error interrupt(Frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \ - ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \ - ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK)))) - -/** @brief Disable the specified IRDA interrupt. - * @param __HANDLE__ specifies the IRDA Handle. - * @param __INTERRUPT__ specifies the IRDA interrupt source to disable. - * This parameter can be one of the following values: - * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt - * @arg @ref IRDA_IT_TC Transmission complete interrupt - * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt - * @arg @ref IRDA_IT_IDLE Idle line detection interrupt - * @arg @ref IRDA_IT_PE Parity Error interrupt - * @arg @ref IRDA_IT_ERR Error interrupt(Frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \ - ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \ - ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK)))) - - -/** @brief Check whether the specified IRDA interrupt has occurred or not. - * @param __HANDLE__ specifies the IRDA Handle. - * @param __IT__ specifies the IRDA interrupt source to check. - * This parameter can be one of the following values: - * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt - * @arg @ref IRDA_IT_TC Transmission complete interrupt - * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt - * @arg @ref IRDA_IT_IDLE Idle line detection interrupt - * @arg @ref IRDA_IT_ORE OverRun Error interrupt - * @arg @ref IRDA_IT_NE Noise Error interrupt - * @arg @ref IRDA_IT_FE Framing Error interrupt - * @arg @ref IRDA_IT_PE Parity Error interrupt - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_IRDA_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & (1U << ((__IT__)>> 0x08U))) - -/** @brief Check whether the specified IRDA interrupt source is enabled or not. - * @param __HANDLE__ specifies the IRDA Handle. - * @param __IT__ specifies the IRDA interrupt source to check. - * This parameter can be one of the following values: - * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt - * @arg @ref IRDA_IT_TC Transmission complete interrupt - * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt - * @arg @ref IRDA_IT_IDLE Idle line detection interrupt - * @arg @ref IRDA_IT_ERR Framing, overrun or noise error interrupt - * @arg @ref IRDA_IT_PE Parity Error interrupt - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1U)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2U)? \ - (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (1U << (((uint16_t)(__IT__)) & IRDA_IT_MASK))) - - -/** @brief Clear the specified IRDA ISR flag, in setting the proper ICR register flag. - * @param __HANDLE__ specifies the IRDA Handle. - * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set - * to clear the corresponding interrupt - * This parameter can be one of the following values: - * @arg @ref IRDA_CLEAR_PEF Parity Error Clear Flag - * @arg @ref IRDA_CLEAR_FEF Framing Error Clear Flag - * @arg @ref IRDA_CLEAR_NEF Noise detected Clear Flag - * @arg @ref IRDA_CLEAR_OREF OverRun Error Clear Flag - * @arg @ref IRDA_CLEAR_TCF Transmission Complete Clear Flag - * @retval None - */ -#define __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) - - -/** @brief Set a specific IRDA request flag. - * @param __HANDLE__ specifies the IRDA Handle. - * @param __REQ__ specifies the request flag to set - * This parameter can be one of the following values: - * @arg @ref IRDA_AUTOBAUD_REQUEST Auto-Baud Rate Request - * @arg @ref IRDA_RXDATA_FLUSH_REQUEST Receive Data flush Request - * @arg @ref IRDA_TXDATA_FLUSH_REQUEST Transmit data flush Request - * - * @retval None - */ -#define __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) - -/** @brief Enable the IRDA one bit sample method. - * @param __HANDLE__ specifies the IRDA Handle. - * @retval None - */ -#define __HAL_IRDA_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) - -/** @brief Disable the IRDA one bit sample method. - * @param __HANDLE__ specifies the IRDA Handle. - * @retval None - */ -#define __HAL_IRDA_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT)) - -/** @brief Enable UART/USART associated to IRDA Handle. - * @param __HANDLE__ specifies the IRDA Handle. - * @retval None - */ -#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) - -/** @brief Disable UART/USART associated to IRDA Handle. - * @param __HANDLE__ specifies the IRDA Handle. - * @retval None - */ -#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) - -/** - * @} - */ - -/* Private macros --------------------------------------------------------*/ -/** @defgroup IRDA_Private_Macros IRDA Private Macros - * @{ - */ - -/** @brief Ensure that IRDA Baud rate is less or equal to maximum value. - * @param __BAUDRATE__ specifies the IRDA Baudrate set by the user. - * @retval True or False - */ -#define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201U) - -/** @brief Ensure that IRDA prescaler value is strictly larger than 0. - * @param __PRESCALER__ specifies the IRDA prescaler value set by the user. - * @retval True or False - */ -#define IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0U) - -/** - * @brief Ensure that IRDA frame parity is valid. - * @param __PARITY__ IRDA frame parity. - * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) - */ -#define IS_IRDA_PARITY(__PARITY__) (((__PARITY__) == IRDA_PARITY_NONE) || \ - ((__PARITY__) == IRDA_PARITY_EVEN) || \ - ((__PARITY__) == IRDA_PARITY_ODD)) - -/** - * @brief Ensure that IRDA communication mode is valid. - * @param __MODE__ IRDA communication mode. - * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) - */ -#define IS_IRDA_TX_RX_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(IRDA_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) - -/** - * @brief Ensure that IRDA power mode is valid. - * @param __MODE__ IRDA power mode. - * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) - */ -#define IS_IRDA_POWERMODE(__MODE__) (((__MODE__) == IRDA_POWERMODE_LOWPOWER) || \ - ((__MODE__) == IRDA_POWERMODE_NORMAL)) - -/** - * @brief Ensure that IRDA state is valid. - * @param __STATE__ IRDA state mode. - * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) - */ -#define IS_IRDA_STATE(__STATE__) (((__STATE__) == IRDA_STATE_DISABLE) || \ - ((__STATE__) == IRDA_STATE_ENABLE)) - -/** - * @brief Ensure that IRDA associated UART/USART mode is valid. - * @param __MODE__ IRDA associated UART/USART mode. - * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) - */ -#define IS_IRDA_MODE(__MODE__) (((__MODE__) == IRDA_MODE_DISABLE) || \ - ((__MODE__) == IRDA_MODE_ENABLE)) - -/** - * @brief Ensure that IRDA sampling rate is valid. - * @param __ONEBIT__ IRDA sampling rate. - * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) - */ -#define IS_IRDA_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_DISABLE) || \ - ((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_ENABLE)) - -/** - * @brief Ensure that IRDA DMA TX mode is valid. - * @param __DMATX__ IRDA DMA TX mode. - * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid) - */ -#define IS_IRDA_DMA_TX(__DMATX__) (((__DMATX__) == IRDA_DMA_TX_DISABLE) || \ - ((__DMATX__) == IRDA_DMA_TX_ENABLE)) - -/** - * @brief Ensure that IRDA DMA RX mode is valid. - * @param __DMARX__ IRDA DMA RX mode. - * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid) - */ -#define IS_IRDA_DMA_RX(__DMARX__) (((__DMARX__) == IRDA_DMA_RX_DISABLE) || \ - ((__DMARX__) == IRDA_DMA_RX_ENABLE)) - -/** - * @brief Ensure that IRDA request is valid. - * @param __PARAM__ IRDA request. - * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) - */ -#define IS_IRDA_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == IRDA_AUTOBAUD_REQUEST) || \ - ((__PARAM__) == IRDA_RXDATA_FLUSH_REQUEST) || \ - ((__PARAM__) == IRDA_TXDATA_FLUSH_REQUEST)) -/** - * @} - */ - -/* Include IRDA HAL Extended module */ -#include "stm32f0xx_hal_irda_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup IRDA_Exported_Functions IRDA Exported Functions - * @{ - */ - -/** @addtogroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ - -/* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda); -HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda); - -/** - * @} - */ - -/** @addtogroup IRDA_Exported_Functions_Group2 IO operation functions - * @{ - */ - -/* IO operation functions *****************************************************/ -HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda); -HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda); -HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda); -/* Transfer Abort functions */ -HAL_StatusTypeDef HAL_IRDA_Abort(IRDA_HandleTypeDef *hirda); -HAL_StatusTypeDef HAL_IRDA_AbortTransmit(IRDA_HandleTypeDef *hirda); -HAL_StatusTypeDef HAL_IRDA_AbortReceive(IRDA_HandleTypeDef *hirda); -HAL_StatusTypeDef HAL_IRDA_Abort_IT(IRDA_HandleTypeDef *hirda); -HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT(IRDA_HandleTypeDef *hirda); -HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT(IRDA_HandleTypeDef *hirda); - -void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_AbortCpltCallback (IRDA_HandleTypeDef *hirda); -void HAL_IRDA_AbortTransmitCpltCallback (IRDA_HandleTypeDef *hirda); -void HAL_IRDA_AbortReceiveCpltCallback (IRDA_HandleTypeDef *hirda); - -/** - * @} - */ - -/* Peripheral Control functions ************************************************/ - -/** @addtogroup IRDA_Exported_Functions_Group3 Peripheral State and Error functions - * @{ - */ - -/* Peripheral State and Error functions ***************************************/ -HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda); -uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F0xx_HAL_IRDA_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - |