diff options
Diffstat (limited to 'lib/hal-stm32f0/include/stm32f0xx_hal_irda.h')
| -rw-r--r-- | lib/hal-stm32f0/include/stm32f0xx_hal_irda.h | 792 |
1 files changed, 792 insertions, 0 deletions
diff --git a/lib/hal-stm32f0/include/stm32f0xx_hal_irda.h b/lib/hal-stm32f0/include/stm32f0xx_hal_irda.h new file mode 100644 index 00000000..6df14dd5 --- /dev/null +++ b/lib/hal-stm32f0/include/stm32f0xx_hal_irda.h @@ -0,0 +1,792 @@ +/** + ****************************************************************************** + * @file stm32f0xx_hal_irda.h + * @author MCD Application Team + * @brief This file contains all the functions prototypes for the IRDA + * firmware library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_IRDA_H +#define __STM32F0xx_HAL_IRDA_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup IRDA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Types IRDA Exported Types + * @{ + */ + +/** + * @brief IRDA Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate. + The baud rate register is computed using the following formula: + Baud Rate Register = ((PCLKx) / ((hirda->Init.BaudRate))) */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref IRDAEx_Word_Length */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref IRDA_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref IRDA_Transfer_Mode */ + + uint8_t Prescaler; /*!< Specifies the Prescaler value for dividing the UART/USART source clock + to achieve low-power frequency. + @note Prescaler value 0 is forbidden */ + + uint16_t PowerMode; /*!< Specifies the IRDA power mode. + This parameter can be a value of @ref IRDA_Low_Power */ +}IRDA_InitTypeDef; + +/** + * @brief HAL IRDA State structures definition + * @note HAL IRDA State value is a combination of 2 different substates: gState and RxState. + * - gState contains IRDA state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 IP initilisation status + * 0 : Reset (IP not initialized) + * 1 : Init done (IP not initialized. HAL IRDA Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (IP busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 IP initilisation status + * 0 : Reset (IP not initialized) + * 1 : Init done (IP not initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef enum +{ + HAL_IRDA_STATE_RESET = 0x00U, /*!< Peripheral is not initialized + Value is allowed for gState and RxState */ + HAL_IRDA_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ + HAL_IRDA_STATE_BUSY = 0x24U, /*!< an internal process is ongoing + Value is allowed for gState only */ + HAL_IRDA_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing + Value is allowed for gState only */ + HAL_IRDA_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing + Value is allowed for RxState only */ + HAL_IRDA_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing + Not to be used for neither gState nor RxState. + Value is result of combination (Or) between gState and RxState values */ + HAL_IRDA_STATE_TIMEOUT = 0xA0U, /*!< Timeout state + Value is allowed for gState only */ + HAL_IRDA_STATE_ERROR = 0xE0U /*!< Error + Value is allowed for gState only */ +}HAL_IRDA_StateTypeDef; + +/** + * @brief IRDA clock sources definition + */ +typedef enum +{ + IRDA_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ + IRDA_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ + IRDA_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ + IRDA_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ + IRDA_CLOCKSOURCE_UNDEFINED = 0x10U /*!< Undefined clock source */ +}IRDA_ClockSourceTypeDef; + +/** + * @brief IRDA handle Structure definition + */ +typedef struct +{ + USART_TypeDef *Instance; /*!< IRDA registers base address */ + + IRDA_InitTypeDef Init; /*!< IRDA communication parameters */ + + uint8_t *pTxBuffPtr; /*!< Pointer to IRDA Tx transfer Buffer */ + + uint16_t TxXferSize; /*!< IRDA Tx Transfer size */ + + __IO uint16_t TxXferCount; /*!< IRDA Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /*!< Pointer to IRDA Rx transfer Buffer */ + + uint16_t RxXferSize; /*!< IRDA Rx Transfer size */ + + __IO uint16_t RxXferCount; /*!< IRDA Rx Transfer Counter */ + + uint16_t Mask; /*!< IRDA RX RDR register mask */ + + DMA_HandleTypeDef *hdmatx; /*!< IRDA Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /*!< IRDA Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /*!< Locking object */ + + __IO HAL_IRDA_StateTypeDef gState; /*!< IRDA state information related to global Handle management + and also related to Tx operations. + This parameter can be a value of @ref HAL_IRDA_StateTypeDef */ + + __IO HAL_IRDA_StateTypeDef RxState; /*!< IRDA state information related to Rx operations. + This parameter can be a value of @ref HAL_IRDA_StateTypeDef */ + + __IO uint32_t ErrorCode; /*!< IRDA Error code + This parameter can be a value of @ref IRDA_Error */ + +}IRDA_HandleTypeDef; + +/** + * @brief IRDA Configuration enumeration values definition + */ +typedef enum +{ + IRDA_BAUDRATE = 0x00U, /*!< IRDA Baud rate */ + IRDA_PARITY = 0x01U, /*!< IRDA frame parity */ + IRDA_WORDLENGTH = 0x02U, /*!< IRDA frame length */ + IRDA_MODE = 0x03U, /*!< IRDA communication mode */ + IRDA_PRESCALER = 0x04U, /*!< IRDA prescaling */ + IRDA_POWERMODE = 0x05U /*!< IRDA power mode */ +}IRDA_ControlTypeDef; + +/** + * @} + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Constants IRDA Exported Constants + * @{ + */ + +/** @defgroup IRDA_Error IRDA Error + * @{ + */ +#define HAL_IRDA_ERROR_NONE (0x00000000U) /*!< No error */ +#define HAL_IRDA_ERROR_PE (0x00000001U) /*!< Parity error */ +#define HAL_IRDA_ERROR_NE (0x00000002U) /*!< Noise error */ +#define HAL_IRDA_ERROR_FE (0x00000004U) /*!< frame error */ +#define HAL_IRDA_ERROR_ORE (0x00000008U) /*!< Overrun error */ +#define HAL_IRDA_ERROR_DMA (0x00000010U) /*!< DMA transfer error */ +#define HAL_IRDA_ERROR_BUSY (0x00000020U) /*!< Busy Error */ +/** + * @} + */ + +/** @defgroup IRDA_Parity IRDA Parity + * @{ + */ +#define IRDA_PARITY_NONE (0x00000000U) /*!< No parity */ +#define IRDA_PARITY_EVEN ((uint32_t)USART_CR1_PCE) /*!< Even parity */ +#define IRDA_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) /*!< Odd parity */ +/** + * @} + */ + +/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode + * @{ + */ +#define IRDA_MODE_RX ((uint32_t)USART_CR1_RE) /*!< RX mode */ +#define IRDA_MODE_TX ((uint32_t)USART_CR1_TE) /*!< TX mode */ +#define IRDA_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) /*!< RX and TX mode */ +/** + * @} + */ + +/** @defgroup IRDA_Low_Power IRDA Low Power + * @{ + */ +#define IRDA_POWERMODE_NORMAL (0x00000000U) /*!< IRDA normal power mode */ +#define IRDA_POWERMODE_LOWPOWER ((uint32_t)USART_CR3_IRLP) /*!< IRDA low power mode */ +/** + * @} + */ + +/** @defgroup IRDA_State IRDA State + * @{ + */ +#define IRDA_STATE_DISABLE (0x00000000U) /*!< IRDA disabled */ +#define IRDA_STATE_ENABLE ((uint32_t)USART_CR1_UE) /*!< IRDA enabled */ +/** + * @} + */ + +/** @defgroup IRDA_Mode IRDA Mode + * @{ + */ +#define IRDA_MODE_DISABLE (0x00000000U) /*!< Associated UART disabled in IRDA mode */ +#define IRDA_MODE_ENABLE ((uint32_t)USART_CR3_IREN) /*!< Associated UART enabled in IRDA mode */ +/** + * @} + */ + +/** @defgroup IRDA_One_Bit IRDA One Bit Sampling + * @{ + */ +#define IRDA_ONE_BIT_SAMPLE_DISABLE (0x00000000U) /*!< One-bit sampling disabled */ +#define IRDA_ONE_BIT_SAMPLE_ENABLE ((uint32_t)USART_CR3_ONEBIT) /*!< One-bit sampling enabled */ +/** + * @} + */ + +/** @defgroup IRDA_DMA_Tx IRDA DMA Tx + * @{ + */ +#define IRDA_DMA_TX_DISABLE (0x00000000U) /*!< IRDA DMA TX disabled */ +#define IRDA_DMA_TX_ENABLE ((uint32_t)USART_CR3_DMAT) /*!< IRDA DMA TX enabled */ +/** + * @} + */ + +/** @defgroup IRDA_DMA_Rx IRDA DMA Rx + * @{ + */ +#define IRDA_DMA_RX_DISABLE (0x00000000U) /*!< IRDA DMA RX disabled */ +#define IRDA_DMA_RX_ENABLE ((uint32_t)USART_CR3_DMAR) /*!< IRDA DMA RX enabled */ +/** + * @} + */ + +/** @defgroup IRDA_Request_Parameters IRDA Request Parameters + * @{ + */ +#define IRDA_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */ +#define IRDA_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */ +#define IRDA_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */ +/** + * @} + */ + +/** @defgroup IRDA_Flags IRDA Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define IRDA_FLAG_REACK (0x00400000U) /*!< IRDA Receive enable acknowledge flag */ +#define IRDA_FLAG_TEACK (0x00200000U) /*!< IRDA Transmit enable acknowledge flag */ +#define IRDA_FLAG_BUSY (0x00010000U) /*!< IRDA Busy flag */ +#define IRDA_FLAG_ABRF (0x00008000U) /*!< IRDA Auto baud rate flag */ +#define IRDA_FLAG_ABRE (0x00004000U) /*!< IRDA Auto baud rate error */ +#define IRDA_FLAG_TXE (0x00000080U) /*!< IRDA Transmit data register empty */ +#define IRDA_FLAG_TC (0x00000040U) /*!< IRDA Transmission complete */ +#define IRDA_FLAG_RXNE (0x00000020U) /*!< IRDA Read data register not empty */ +#define IRDA_FLAG_ORE (0x00000008U) /*!< IRDA Overrun error */ +#define IRDA_FLAG_NE (0x00000004U) /*!< IRDA Noise error */ +#define IRDA_FLAG_FE (0x00000002U) /*!< IRDA Framing error */ +#define IRDA_FLAG_PE (0x00000001U) /*!< IRDA Parity error */ +/** + * @} + */ + +/** @defgroup IRDA_Interrupt_definition IRDA Interrupts Definition + * Elements values convention: 0000ZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ +#define IRDA_IT_PE ((uint16_t)0x0028U) /*!< IRDA Parity error interruption */ +#define IRDA_IT_TXE ((uint16_t)0x0727U) /*!< IRDA Transmit data register empty interruption */ +#define IRDA_IT_TC ((uint16_t)0x0626U) /*!< IRDA Transmission complete interruption */ +#define IRDA_IT_RXNE ((uint16_t)0x0525U) /*!< IRDA Read data register not empty interruption */ +#define IRDA_IT_IDLE ((uint16_t)0x0424U) /*!< IRDA Idle interruption */ +#define IRDA_IT_ERR ((uint16_t)0x0060U) /*!< IRDA Error interruption */ +#define IRDA_IT_ORE ((uint16_t)0x0300U) /*!< IRDA Overrun error interruption */ +#define IRDA_IT_NE ((uint16_t)0x0200U) /*!< IRDA Noise error interruption */ +#define IRDA_IT_FE ((uint16_t)0x0100U) /*!< IRDA Frame error interruption */ +/** + * @} + */ + +/** @defgroup IRDA_IT_CLEAR_Flags IRDA Interruption Clear Flags + * @{ + */ +#define IRDA_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define IRDA_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define IRDA_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */ +#define IRDA_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ +#define IRDA_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define IRDA_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +/** + * @} + */ + +/** @defgroup IRDA_Interruption_Mask IRDA interruptions flags mask + * @{ + */ +#define IRDA_IT_MASK ((uint16_t)0x001FU) /*!< IRDA Interruptions flags mask */ +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macros -----------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Macros IRDA Exported Macros + * @{ + */ + +/** @brief Reset IRDA handle state. + * @param __HANDLE__ IRDA handle. + * @retval None + */ +#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) do{ \ + (__HANDLE__)->gState = HAL_IRDA_STATE_RESET; \ + (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET; \ + } while(0) + +/** @brief Flush the IRDA DR register. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, IRDA_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, IRDA_TXDATA_FLUSH_REQUEST); \ + } while(0) + +/** @brief Clear the specified IRDA pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref IRDA_CLEAR_PEF + * @arg @ref IRDA_CLEAR_FEF + * @arg @ref IRDA_CLEAR_NEF + * @arg @ref IRDA_CLEAR_OREF + * @arg @ref IRDA_CLEAR_TCF + * @arg @ref IRDA_CLEAR_IDLEF + * @retval None + */ +#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the IRDA PE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_PEF) + + +/** @brief Clear the IRDA FE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_FEF) + +/** @brief Clear the IRDA NE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_NEF) + +/** @brief Clear the IRDA ORE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_OREF) + +/** @brief Clear the IRDA IDLE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_IDLEF) + +/** @brief Check whether the specified IRDA flag is set or not. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg @ref IRDA_FLAG_REACK Receive enable acknowledge flag + * @arg @ref IRDA_FLAG_TEACK Transmit enable acknowledge flag + * @arg @ref IRDA_FLAG_BUSY Busy flag + * @arg @ref IRDA_FLAG_ABRF Auto Baud rate detection flag + * @arg @ref IRDA_FLAG_ABRE Auto Baud rate detection error flag + * @arg @ref IRDA_FLAG_TXE Transmit data register empty flag + * @arg @ref IRDA_FLAG_TC Transmission Complete flag + * @arg @ref IRDA_FLAG_RXNE Receive data register not empty flag + * @arg @ref IRDA_FLAG_ORE OverRun Error flag + * @arg @ref IRDA_FLAG_NE Noise Error flag + * @arg @ref IRDA_FLAG_FE Framing Error flag + * @arg @ref IRDA_FLAG_PE Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + + +/** @brief Enable the specified IRDA interrupt. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __INTERRUPT__ specifies the IRDA interrupt source to enable. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @arg @ref IRDA_IT_ERR Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK)))) + +/** @brief Disable the specified IRDA interrupt. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __INTERRUPT__ specifies the IRDA interrupt source to disable. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @arg @ref IRDA_IT_ERR Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK)))) + + +/** @brief Check whether the specified IRDA interrupt has occurred or not. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __IT__ specifies the IRDA interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_ORE OverRun Error interrupt + * @arg @ref IRDA_IT_NE Noise Error interrupt + * @arg @ref IRDA_IT_FE Framing Error interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_IRDA_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & (1U << ((__IT__)>> 0x08U))) + +/** @brief Check whether the specified IRDA interrupt source is enabled or not. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __IT__ specifies the IRDA interrupt source to check. + * This parameter can be one of the following values: + * @arg @ref IRDA_IT_TXE Transmit Data Register empty interrupt + * @arg @ref IRDA_IT_TC Transmission complete interrupt + * @arg @ref IRDA_IT_RXNE Receive Data register not empty interrupt + * @arg @ref IRDA_IT_IDLE Idle line detection interrupt + * @arg @ref IRDA_IT_ERR Framing, overrun or noise error interrupt + * @arg @ref IRDA_IT_PE Parity Error interrupt + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1U)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2U)? \ + (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (1U << (((uint16_t)(__IT__)) & IRDA_IT_MASK))) + + +/** @brief Clear the specified IRDA ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg @ref IRDA_CLEAR_PEF Parity Error Clear Flag + * @arg @ref IRDA_CLEAR_FEF Framing Error Clear Flag + * @arg @ref IRDA_CLEAR_NEF Noise detected Clear Flag + * @arg @ref IRDA_CLEAR_OREF OverRun Error Clear Flag + * @arg @ref IRDA_CLEAR_TCF Transmission Complete Clear Flag + * @retval None + */ +#define __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) + + +/** @brief Set a specific IRDA request flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg @ref IRDA_AUTOBAUD_REQUEST Auto-Baud Rate Request + * @arg @ref IRDA_RXDATA_FLUSH_REQUEST Receive Data flush Request + * @arg @ref IRDA_TXDATA_FLUSH_REQUEST Transmit data flush Request + * + * @retval None + */ +#define __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable the IRDA one bit sample method. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) + +/** @brief Disable the IRDA one bit sample method. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT)) + +/** @brief Enable UART/USART associated to IRDA Handle. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable UART/USART associated to IRDA Handle. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup IRDA_Private_Macros IRDA Private Macros + * @{ + */ + +/** @brief Ensure that IRDA Baud rate is less or equal to maximum value. + * @param __BAUDRATE__ specifies the IRDA Baudrate set by the user. + * @retval True or False + */ +#define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201U) + +/** @brief Ensure that IRDA prescaler value is strictly larger than 0. + * @param __PRESCALER__ specifies the IRDA prescaler value set by the user. + * @retval True or False + */ +#define IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0U) + +/** + * @brief Ensure that IRDA frame parity is valid. + * @param __PARITY__ IRDA frame parity. + * @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid) + */ +#define IS_IRDA_PARITY(__PARITY__) (((__PARITY__) == IRDA_PARITY_NONE) || \ + ((__PARITY__) == IRDA_PARITY_EVEN) || \ + ((__PARITY__) == IRDA_PARITY_ODD)) + +/** + * @brief Ensure that IRDA communication mode is valid. + * @param __MODE__ IRDA communication mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_IRDA_TX_RX_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(IRDA_MODE_TX_RX)))) == 0x00U) && ((__MODE__) != 0x00U)) + +/** + * @brief Ensure that IRDA power mode is valid. + * @param __MODE__ IRDA power mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_IRDA_POWERMODE(__MODE__) (((__MODE__) == IRDA_POWERMODE_LOWPOWER) || \ + ((__MODE__) == IRDA_POWERMODE_NORMAL)) + +/** + * @brief Ensure that IRDA state is valid. + * @param __STATE__ IRDA state mode. + * @retval SET (__STATE__ is valid) or RESET (__STATE__ is invalid) + */ +#define IS_IRDA_STATE(__STATE__) (((__STATE__) == IRDA_STATE_DISABLE) || \ + ((__STATE__) == IRDA_STATE_ENABLE)) + +/** + * @brief Ensure that IRDA associated UART/USART mode is valid. + * @param __MODE__ IRDA associated UART/USART mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#define IS_IRDA_MODE(__MODE__) (((__MODE__) == IRDA_MODE_DISABLE) || \ + ((__MODE__) == IRDA_MODE_ENABLE)) + +/** + * @brief Ensure that IRDA sampling rate is valid. + * @param __ONEBIT__ IRDA sampling rate. + * @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid) + */ +#define IS_IRDA_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_ENABLE)) + +/** + * @brief Ensure that IRDA DMA TX mode is valid. + * @param __DMATX__ IRDA DMA TX mode. + * @retval SET (__DMATX__ is valid) or RESET (__DMATX__ is invalid) + */ +#define IS_IRDA_DMA_TX(__DMATX__) (((__DMATX__) == IRDA_DMA_TX_DISABLE) || \ + ((__DMATX__) == IRDA_DMA_TX_ENABLE)) + +/** + * @brief Ensure that IRDA DMA RX mode is valid. + * @param __DMARX__ IRDA DMA RX mode. + * @retval SET (__DMARX__ is valid) or RESET (__DMARX__ is invalid) + */ +#define IS_IRDA_DMA_RX(__DMARX__) (((__DMARX__) == IRDA_DMA_RX_DISABLE) || \ + ((__DMARX__) == IRDA_DMA_RX_ENABLE)) + +/** + * @brief Ensure that IRDA request is valid. + * @param __PARAM__ IRDA request. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#define IS_IRDA_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == IRDA_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == IRDA_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == IRDA_TXDATA_FLUSH_REQUEST)) +/** + * @} + */ + +/* Include IRDA HAL Extended module */ +#include "stm32f0xx_hal_irda_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup IRDA_Exported_Functions IRDA Exported Functions + * @{ + */ + +/** @addtogroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda); + +/** + * @} + */ + +/** @addtogroup IRDA_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_IRDA_Abort(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortTransmit(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortReceive(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_Abort_IT(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT(IRDA_HandleTypeDef *hirda); + +void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_AbortCpltCallback (IRDA_HandleTypeDef *hirda); +void HAL_IRDA_AbortTransmitCpltCallback (IRDA_HandleTypeDef *hirda); +void HAL_IRDA_AbortReceiveCpltCallback (IRDA_HandleTypeDef *hirda); + +/** + * @} + */ + +/* Peripheral Control functions ************************************************/ + +/** @addtogroup IRDA_Exported_Functions_Group3 Peripheral State and Error functions + * @{ + */ + +/* Peripheral State and Error functions ***************************************/ +HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda); +uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda); + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_IRDA_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + |