diff options
Diffstat (limited to 'lib/hal-stm32f0/include/stm32f0xx_hal_comp.h')
| -rw-r--r-- | lib/hal-stm32f0/include/stm32f0xx_hal_comp.h | 662 |
1 files changed, 0 insertions, 662 deletions
diff --git a/lib/hal-stm32f0/include/stm32f0xx_hal_comp.h b/lib/hal-stm32f0/include/stm32f0xx_hal_comp.h deleted file mode 100644 index ae0df500..00000000 --- a/lib/hal-stm32f0/include/stm32f0xx_hal_comp.h +++ /dev/null @@ -1,662 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_comp.h - * @author MCD Application Team - * @brief Header file of COMP HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F0xx_HAL_COMP_H -#define __STM32F0xx_HAL_COMP_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F051x8) || defined(STM32F058xx) || \ - defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \ - defined(STM32F091xC) || defined(STM32F098xx) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_hal_def.h" - -/** @addtogroup STM32F0xx_HAL_Driver - * @{ - */ - -/** @addtogroup COMP COMP - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup COMP_Exported_Types COMP Exported Types - * @{ - */ - -/** - * @brief COMP Init structure definition - */ -typedef struct -{ - - uint32_t InvertingInput; /*!< Selects the inverting input of the comparator. - This parameter can be a value of @ref COMP_InvertingInput */ - - uint32_t NonInvertingInput; /*!< Selects the non inverting input of the comparator. - This parameter can be a value of @ref COMP_NonInvertingInput */ - - uint32_t Output; /*!< Selects the output redirection of the comparator. - This parameter can be a value of @ref COMP_Output */ - - uint32_t OutputPol; /*!< Selects the output polarity of the comparator. - This parameter can be a value of @ref COMP_OutputPolarity */ - - uint32_t Hysteresis; /*!< Selects the hysteresis voltage of the comparator. - This parameter can be a value of @ref COMP_Hysteresis */ - - uint32_t Mode; /*!< Selects the operating comsumption mode of the comparator - to adjust the speed/consumption. - This parameter can be a value of @ref COMP_Mode */ - - uint32_t WindowMode; /*!< Selects the window mode of the comparator 1 & 2. - This parameter can be a value of @ref COMP_WindowMode */ - - uint32_t TriggerMode; /*!< Selects the trigger mode of the comparator (interrupt mode). - This parameter can be a value of @ref COMP_TriggerMode */ - -}COMP_InitTypeDef; - -/** - * @brief COMP Handle Structure definition - */ -typedef struct -{ - COMP_TypeDef *Instance; /*!< Register base address */ - COMP_InitTypeDef Init; /*!< COMP required parameters */ - HAL_LockTypeDef Lock; /*!< Locking object */ - __IO uint32_t State; /*!< COMP communication state - This parameter can be a value of @ref COMP_State */ -}COMP_HandleTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup COMP_Exported_Constants COMP Exported Constants - * @{ - */ - -/** @defgroup COMP_State COMP State - * @{ - */ -#define HAL_COMP_STATE_RESET (0x00000000U) /*!< COMP not yet initialized or disabled */ -#define HAL_COMP_STATE_READY (0x00000001U) /*!< COMP initialized and ready for use */ -#define HAL_COMP_STATE_READY_LOCKED (0x00000011U) /*!< COMP initialized but the configuration is locked */ -#define HAL_COMP_STATE_BUSY (0x00000002U) /*!< COMP is running */ -#define HAL_COMP_STATE_BUSY_LOCKED (0x00000012U) /*!< COMP is running and the configuration is locked */ -/** - * @} - */ - -/** @defgroup COMP_OutputPolarity COMP OutputPolarity - * @{ - */ -#define COMP_OUTPUTPOL_NONINVERTED (0x00000000U) /*!< COMP output on GPIO isn't inverted */ -#define COMP_OUTPUTPOL_INVERTED COMP_CSR_COMP1POL /*!< COMP output on GPIO is inverted */ -/** - * @} - */ - -/** @defgroup COMP_Hysteresis COMP Hysteresis - * @{ - */ -#define COMP_HYSTERESIS_NONE (0x00000000U) /*!< No hysteresis */ -#define COMP_HYSTERESIS_LOW COMP_CSR_COMP1HYST_0 /*!< Hysteresis level low */ -#define COMP_HYSTERESIS_MEDIUM COMP_CSR_COMP1HYST_1 /*!< Hysteresis level medium */ -#define COMP_HYSTERESIS_HIGH COMP_CSR_COMP1HYST /*!< Hysteresis level high */ -/** - * @} - */ - -/** @defgroup COMP_Mode COMP Mode - * @{ - */ -/* Please refer to the electrical characteristics in the device datasheet for - the power consumption values */ -#define COMP_MODE_HIGHSPEED (0x00000000U) /*!< High Speed */ -#define COMP_MODE_MEDIUMSPEED COMP_CSR_COMP1MODE_0 /*!< Medium Speed */ -#define COMP_MODE_LOWPOWER COMP_CSR_COMP1MODE_1 /*!< Low power mode */ -#define COMP_MODE_ULTRALOWPOWER COMP_CSR_COMP1MODE /*!< Ultra-low power mode */ -/** - * @} - */ - -/** @defgroup COMP_InvertingInput COMP InvertingInput - * @{ - */ - -#define COMP_INVERTINGINPUT_1_4VREFINT (0x00000000U) /*!< 1/4 VREFINT connected to comparator inverting input */ -#define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMP1INSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */ -#define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMP1INSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */ -#define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMP1INSEL_1|COMP_CSR_COMP1INSEL_0) /*!< VREFINT connected to comparator inverting input */ -#define COMP_INVERTINGINPUT_DAC1 COMP_CSR_COMP1INSEL_2 /*!< DAC_OUT1 (PA4) connected to comparator inverting input */ -#define COMP_INVERTINGINPUT_DAC1SWITCHCLOSED (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1SW1) /*!< DAC_OUT1 (PA4) connected to comparator inverting input - and close switch (PA0 for COMP1 only) */ -#define COMP_INVERTINGINPUT_DAC2 (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1INSEL_0) /*!< DAC_OUT2 (PA5) connected to comparator inverting input */ -#define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1INSEL_1) /*!< IO (PA0 for COMP1 and PA2 for COMP2) connected to comparator inverting input */ -/** - * @} - */ - -/** @defgroup COMP_NonInvertingInput COMP NonInvertingInput - * @{ - */ -#define COMP_NONINVERTINGINPUT_IO1 (0x00000000U) /*!< I/O1 (PA1 for COMP1, PA3 for COMP2) - connected to comparator non inverting input */ -#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */ -/** - * @} - */ - -/** @defgroup COMP_Output COMP Output - * @{ - */ - -/* Output Redirection common for COMP1 and COMP2 */ -#define COMP_OUTPUT_NONE (0x00000000U) /*!< COMP output isn't connected to other peripherals */ -#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMP1OUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */ -#define COMP_OUTPUT_TIM1IC1 COMP_CSR_COMP1OUTSEL_1 /*!< COMP output connected to TIM1 Input Capture 1 */ -#define COMP_OUTPUT_TIM1OCREFCLR (COMP_CSR_COMP1OUTSEL_1|COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM1 OCREF Clear */ -#define COMP_OUTPUT_TIM2IC4 COMP_CSR_COMP1OUTSEL_2 /*!< COMP output connected to TIM2 Input Capture 4 */ -#define COMP_OUTPUT_TIM2OCREFCLR (COMP_CSR_COMP1OUTSEL_2|COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM2 OCREF Clear */ -#define COMP_OUTPUT_TIM3IC1 (COMP_CSR_COMP1OUTSEL_2|COMP_CSR_COMP1OUTSEL_1) /*!< COMP output connected to TIM3 Input Capture 1 */ -#define COMP_OUTPUT_TIM3OCREFCLR COMP_CSR_COMP1OUTSEL /*!< COMP output connected to TIM3 OCREF Clear */ -/** - * @} - */ - -/** @defgroup COMP_OutputLevel COMP OutputLevel - * @{ - */ -/* When output polarity is not inverted, comparator output is low when - the non-inverting input is at a lower voltage than the inverting input*/ -#define COMP_OUTPUTLEVEL_LOW (0x00000000U) -/* When output polarity is not inverted, comparator output is high when - the non-inverting input is at a higher voltage than the inverting input */ -#define COMP_OUTPUTLEVEL_HIGH COMP_CSR_COMP1OUT -/** - * @} - */ - -/** @defgroup COMP_TriggerMode COMP TriggerMode - * @{ - */ -#define COMP_TRIGGERMODE_NONE (0x00000000U) /*!< No External Interrupt trigger detection */ -#define COMP_TRIGGERMODE_IT_RISING (0x00000001U) /*!< External Interrupt Mode with Rising edge trigger detection */ -#define COMP_TRIGGERMODE_IT_FALLING (0x00000002U) /*!< External Interrupt Mode with Falling edge trigger detection */ -#define COMP_TRIGGERMODE_IT_RISING_FALLING (0x00000003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ -#define COMP_TRIGGERMODE_EVENT_RISING (0x00000010U) /*!< Event Mode with Rising edge trigger detection */ -#define COMP_TRIGGERMODE_EVENT_FALLING (0x00000020U) /*!< Event Mode with Falling edge trigger detection */ -#define COMP_TRIGGERMODE_EVENT_RISING_FALLING (0x00000030U) /*!< Event Mode with Rising/Falling edge trigger detection */ -/** - * @} - */ - -/** @defgroup COMP_WindowMode COMP WindowMode - * @{ - */ -#define COMP_WINDOWMODE_DISABLE (0x00000000U) /*!< Window mode disabled */ -#define COMP_WINDOWMODE_ENABLE COMP_CSR_WNDWEN /*!< Window mode enabled: non inverting input of comparator 2 - is connected to the non inverting input of comparator 1 (PA1) */ -/** - * @} - */ - -/** @defgroup COMP_Flag COMP Flag - * @{ - */ -#define COMP_FLAG_LOCK ((uint32_t)COMP_CSR_COMPxLOCK) /*!< Lock flag */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup COMP_Exported_Macros COMP Exported Macros - * @{ - */ - -/** @brief Reset COMP handle state - * @param __HANDLE__ COMP handle. - * @retval None - */ -#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET) - -/** - * @brief Enable the specified comparator. - * @param __HANDLE__ COMP handle. - * @retval None - */ -#define __HAL_COMP_ENABLE(__HANDLE__) (((__HANDLE__)->Instance == COMP1) ? \ - SET_BIT(COMP->CSR, COMP_CSR_COMP1EN) : \ - SET_BIT(COMP->CSR, COMP_CSR_COMP2EN)) - -/** - * @brief Disable the specified comparator. - * @param __HANDLE__ COMP handle. - * @retval None - */ -#define __HAL_COMP_DISABLE(__HANDLE__) (((__HANDLE__)->Instance == COMP1) ? \ - CLEAR_BIT(COMP->CSR, COMP_CSR_COMP1EN) : \ - CLEAR_BIT(COMP->CSR, COMP_CSR_COMP2EN)) - -/** - * @brief Lock the specified comparator configuration. - * @param __HANDLE__ COMP handle. - * @retval None - */ -#define __HAL_COMP_LOCK(__HANDLE__) (((__HANDLE__)->Instance == COMP1) ? \ - SET_BIT(COMP->CSR, COMP_CSR_COMP1LOCK) : \ - SET_BIT(COMP->CSR, COMP_CSR_COMP2LOCK)) - -/** - * @brief Enable the COMP1 EXTI line rising edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Disable the COMP1 EXTI line rising edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Enable the COMP1 EXTI line falling edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Disable the COMP1 EXTI line falling edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Enable the COMP1 EXTI line rising & falling edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ - __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE(); \ - __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Disable the COMP1 EXTI line rising & falling edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ - __HAL_COMP_COMP1_EXTI_DISABLE_RISING_EDGE(); \ - __HAL_COMP_COMP1_EXTI_DISABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Enable the COMP1 EXTI line in interrupt mode. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Disable the COMP1 EXTI line in interrupt mode. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Generate a software interrupt on the COMP1 EXTI line. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, COMP_EXTI_LINE_COMP1) - -/** - * @brief Enable the COMP1 EXTI Line in event mode. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Disable the COMP1 EXTI Line in event mode. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Check whether the COMP1 EXTI line flag is set or not. - * @retval RESET or SET - */ -#define __HAL_COMP_COMP1_EXTI_GET_FLAG() READ_BIT(EXTI->PR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Clear the COMP1 EXTI flag. - * @retval None - */ -#define __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR, COMP_EXTI_LINE_COMP1) - -/** - * @brief Enable the COMP2 EXTI line rising edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP2) - -/** - * @brief Disable the COMP2 EXTI line rising edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, COMP_EXTI_LINE_COMP2) - -/** - * @brief Enable the COMP2 EXTI line falling edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP2) - -/** - * @brief Disable the COMP2 EXTI line falling edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, COMP_EXTI_LINE_COMP2) - -/** - * @brief Enable the COMP2 EXTI line rising & falling edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_ENABLE_RISING_FALLING_EDGE() do { \ - __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE(); \ - __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Disable the COMP2 EXTI line rising & falling edge trigger. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_DISABLE_RISING_FALLING_EDGE() do { \ - __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE(); \ - __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE(); \ - } while(0) - -/** - * @brief Enable the COMP2 EXTI line in interrupt mode. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP2) - -/** - * @brief Disable the COMP2 EXTI line in interrupt mode. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, COMP_EXTI_LINE_COMP2) - -/** - * @brief Generate a software interrupt on the COMP2 EXTI line. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, COMP_EXTI_LINE_COMP2) - -/** - * @brief Enable the COMP2 EXTI Line in event mode. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP2) - -/** - * @brief Disable the COMP2 EXTI Line in event mode. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, COMP_EXTI_LINE_COMP2) - -/** - * @brief Check whether the COMP2 EXTI line flag is set or not. - * @retval RESET or SET - */ -#define __HAL_COMP_COMP2_EXTI_GET_FLAG() READ_BIT(EXTI->PR, COMP_EXTI_LINE_COMP2) - -/** - * @brief Clear the COMP2 EXTI flag. - * @retval None - */ -#define __HAL_COMP_COMP2_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR, COMP_EXTI_LINE_COMP2) - -/** @brief Check whether the specified COMP flag is set or not. - * @param __HANDLE__ specifies the COMP Handle. - * @param __FLAG__ specifies the flag to check. - * This parameter can be one of the following values: - * @arg COMP_FLAG_LOCK: lock flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_COMP_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->CSR & (__FLAG__)) == (__FLAG__)) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup COMP_Exported_Functions COMP Exported Functions - * @{ - */ -/** @addtogroup COMP_Exported_Functions_Group1 Initialization/de-initialization functions - * @brief Initialization and Configuration functions - * @{ - */ -/* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp); -HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp); -void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp); -void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp); -/** - * @} - */ - -/** @addtogroup COMP_Exported_Functions_Group2 I/O operation functions - * @brief Data transfers functions - * @{ - */ -/* IO operation functions *****************************************************/ -HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp); -HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp); -HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp); -HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp); -void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp); -/** - * @} - */ - -/** @addtogroup COMP_Exported_Functions_Group3 Peripheral Control functions - * @brief management functions - * @{ - */ -/* Peripheral Control functions ***********************************************/ -HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp); -uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp); - -/* Callback in Interrupt mode */ -void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp); -/** - * @} - */ - -/** @addtogroup COMP_Exported_Functions_Group4 Peripheral State functions - * @brief Peripheral State functions - * @{ - */ -/* Peripheral State and Error functions ***************************************/ -uint32_t HAL_COMP_GetState(COMP_HandleTypeDef *hcomp); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup COMP_Private_Constants COMP Private Constants - * @{ - */ -/** @defgroup COMP_ExtiLine COMP EXTI Lines - * Elements values convention: XXXX0000 - * - XXXX : Interrupt mask in the EMR/IMR/RTSR/FTSR register - * @{ - */ -#define COMP_EXTI_LINE_COMP1 ((uint32_t)EXTI_IMR_MR21) /*!< EXTI line 21 connected to COMP1 output */ -#define COMP_EXTI_LINE_COMP2 ((uint32_t)EXTI_IMR_MR22) /*!< EXTI line 22 connected to COMP2 output */ - -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup COMP_Private_Macros COMP Private Macros - * @{ - */ -/** @defgroup COMP_GET_EXTI_LINE COMP Private macros to get EXTI line associated with Comparators - * @{ - */ -/** - * @brief Get the specified EXTI line for a comparator instance. - * @param __INSTANCE__ specifies the COMP instance. - * @retval value of @ref COMP_ExtiLine - */ -#define COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1 : \ - COMP_EXTI_LINE_COMP2) -/** - * @} - */ - -/** @defgroup COMP_IS_COMP_Definitions COMP Private macros to check input parameters - * @{ - */ - -#define IS_COMP_OUTPUTPOL(POL) (((POL) == COMP_OUTPUTPOL_NONINVERTED) || \ - ((POL) == COMP_OUTPUTPOL_INVERTED)) - -#define IS_COMP_HYSTERESIS(HYSTERESIS) (((HYSTERESIS) == COMP_HYSTERESIS_NONE) || \ - ((HYSTERESIS) == COMP_HYSTERESIS_LOW) || \ - ((HYSTERESIS) == COMP_HYSTERESIS_MEDIUM) || \ - ((HYSTERESIS) == COMP_HYSTERESIS_HIGH)) - -#define IS_COMP_MODE(MODE) (((MODE) == COMP_MODE_HIGHSPEED) || \ - ((MODE) == COMP_MODE_MEDIUMSPEED) || \ - ((MODE) == COMP_MODE_LOWPOWER) || \ - ((MODE) == COMP_MODE_ULTRALOWPOWER)) - -#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \ - ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \ - ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \ - ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \ - ((INPUT) == COMP_INVERTINGINPUT_DAC1) || \ - ((INPUT) == COMP_INVERTINGINPUT_DAC1SWITCHCLOSED) || \ - ((INPUT) == COMP_INVERTINGINPUT_DAC2) || \ - ((INPUT) == COMP_INVERTINGINPUT_IO1)) - -#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \ - ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED)) - -#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \ - ((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \ - ((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \ - ((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \ - ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \ - ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \ - ((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \ - ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR)) - -#define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLE) || \ - ((WINDOWMODE) == COMP_WINDOWMODE_ENABLE)) - -#define IS_COMP_TRIGGERMODE(__MODE__) (((__MODE__) == COMP_TRIGGERMODE_NONE) || \ - ((__MODE__) == COMP_TRIGGERMODE_IT_RISING) || \ - ((__MODE__) == COMP_TRIGGERMODE_IT_FALLING) || \ - ((__MODE__) == COMP_TRIGGERMODE_IT_RISING_FALLING) || \ - ((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING) || \ - ((__MODE__) == COMP_TRIGGERMODE_EVENT_FALLING) || \ - ((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING_FALLING)) -/** - * @} - */ - -/** @defgroup COMP_Lock COMP Lock - * @{ - */ -#define COMP_LOCK_DISABLE (0x00000000U) -#define COMP_LOCK_ENABLE COMP_CSR_COMP1LOCK - -#define COMP_STATE_BIT_LOCK (0x10U) -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F051x8 || STM32F058xx || */ - /* STM32F071xB || STM32F072xB || STM32F078xx || */ - /* STM32F091xC || STM32F098xx */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F0xx_HAL_COMP_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - |