diff options
Diffstat (limited to 'lib/cmsis-sam3x8e/include/instance/instance_usart3.h')
| -rw-r--r-- | lib/cmsis-sam3x8e/include/instance/instance_usart3.h | 96 |
1 files changed, 0 insertions, 96 deletions
diff --git a/lib/cmsis-sam3x8e/include/instance/instance_usart3.h b/lib/cmsis-sam3x8e/include/instance/instance_usart3.h deleted file mode 100644 index df12c98b..00000000 --- a/lib/cmsis-sam3x8e/include/instance/instance_usart3.h +++ /dev/null @@ -1,96 +0,0 @@ -/* ---------------------------------------------------------------------------- - * SAM Software Package License - * ---------------------------------------------------------------------------- - * Copyright (c) 2012, Atmel Corporation - * - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following condition is met: - * - * - Redistributions of source code must retain the above copyright notice, - * this list of conditions and the disclaimer below. - * - * Atmel's name may not be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE - * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, - * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * ---------------------------------------------------------------------------- - */ - -#ifndef _SAM3XA_USART3_INSTANCE_ -#define _SAM3XA_USART3_INSTANCE_ - -/* ========== Register definition for USART3 peripheral ========== */ -#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) -#define REG_USART3_CR (0x400A4000U) /**< \brief (USART3) Control Register */ -#define REG_USART3_MR (0x400A4004U) /**< \brief (USART3) Mode Register */ -#define REG_USART3_IER (0x400A4008U) /**< \brief (USART3) Interrupt Enable Register */ -#define REG_USART3_IDR (0x400A400CU) /**< \brief (USART3) Interrupt Disable Register */ -#define REG_USART3_IMR (0x400A4010U) /**< \brief (USART3) Interrupt Mask Register */ -#define REG_USART3_CSR (0x400A4014U) /**< \brief (USART3) Channel Status Register */ -#define REG_USART3_RHR (0x400A4018U) /**< \brief (USART3) Receiver Holding Register */ -#define REG_USART3_THR (0x400A401CU) /**< \brief (USART3) Transmitter Holding Register */ -#define REG_USART3_BRGR (0x400A4020U) /**< \brief (USART3) Baud Rate Generator Register */ -#define REG_USART3_RTOR (0x400A4024U) /**< \brief (USART3) Receiver Time-out Register */ -#define REG_USART3_TTGR (0x400A4028U) /**< \brief (USART3) Transmitter Timeguard Register */ -#define REG_USART3_FIDI (0x400A4040U) /**< \brief (USART3) FI DI Ratio Register */ -#define REG_USART3_NER (0x400A4044U) /**< \brief (USART3) Number of Errors Register */ -#define REG_USART3_IF (0x400A404CU) /**< \brief (USART3) IrDA Filter Register */ -#define REG_USART3_MAN (0x400A4050U) /**< \brief (USART3) Manchester Encoder Decoder Register */ -#define REG_USART3_LINMR (0x400A4054U) /**< \brief (USART3) LIN Mode Register */ -#define REG_USART3_LINIR (0x400A4058U) /**< \brief (USART3) LIN Identifier Register */ -#define REG_USART3_WPMR (0x400A40E4U) /**< \brief (USART3) Write Protect Mode Register */ -#define REG_USART3_WPSR (0x400A40E8U) /**< \brief (USART3) Write Protect Status Register */ -#define REG_USART3_RPR (0x400A4100U) /**< \brief (USART3) Receive Pointer Register */ -#define REG_USART3_RCR (0x400A4104U) /**< \brief (USART3) Receive Counter Register */ -#define REG_USART3_TPR (0x400A4108U) /**< \brief (USART3) Transmit Pointer Register */ -#define REG_USART3_TCR (0x400A410CU) /**< \brief (USART3) Transmit Counter Register */ -#define REG_USART3_RNPR (0x400A4110U) /**< \brief (USART3) Receive Next Pointer Register */ -#define REG_USART3_RNCR (0x400A4114U) /**< \brief (USART3) Receive Next Counter Register */ -#define REG_USART3_TNPR (0x400A4118U) /**< \brief (USART3) Transmit Next Pointer Register */ -#define REG_USART3_TNCR (0x400A411CU) /**< \brief (USART3) Transmit Next Counter Register */ -#define REG_USART3_PTCR (0x400A4120U) /**< \brief (USART3) Transfer Control Register */ -#define REG_USART3_PTSR (0x400A4124U) /**< \brief (USART3) Transfer Status Register */ -#else -#define REG_USART3_CR (*(WoReg*)0x400A4000U) /**< \brief (USART3) Control Register */ -#define REG_USART3_MR (*(RwReg*)0x400A4004U) /**< \brief (USART3) Mode Register */ -#define REG_USART3_IER (*(WoReg*)0x400A4008U) /**< \brief (USART3) Interrupt Enable Register */ -#define REG_USART3_IDR (*(WoReg*)0x400A400CU) /**< \brief (USART3) Interrupt Disable Register */ -#define REG_USART3_IMR (*(RoReg*)0x400A4010U) /**< \brief (USART3) Interrupt Mask Register */ -#define REG_USART3_CSR (*(RoReg*)0x400A4014U) /**< \brief (USART3) Channel Status Register */ -#define REG_USART3_RHR (*(RoReg*)0x400A4018U) /**< \brief (USART3) Receiver Holding Register */ -#define REG_USART3_THR (*(WoReg*)0x400A401CU) /**< \brief (USART3) Transmitter Holding Register */ -#define REG_USART3_BRGR (*(RwReg*)0x400A4020U) /**< \brief (USART3) Baud Rate Generator Register */ -#define REG_USART3_RTOR (*(RwReg*)0x400A4024U) /**< \brief (USART3) Receiver Time-out Register */ -#define REG_USART3_TTGR (*(RwReg*)0x400A4028U) /**< \brief (USART3) Transmitter Timeguard Register */ -#define REG_USART3_FIDI (*(RwReg*)0x400A4040U) /**< \brief (USART3) FI DI Ratio Register */ -#define REG_USART3_NER (*(RoReg*)0x400A4044U) /**< \brief (USART3) Number of Errors Register */ -#define REG_USART3_IF (*(RwReg*)0x400A404CU) /**< \brief (USART3) IrDA Filter Register */ -#define REG_USART3_MAN (*(RwReg*)0x400A4050U) /**< \brief (USART3) Manchester Encoder Decoder Register */ -#define REG_USART3_LINMR (*(RwReg*)0x400A4054U) /**< \brief (USART3) LIN Mode Register */ -#define REG_USART3_LINIR (*(RwReg*)0x400A4058U) /**< \brief (USART3) LIN Identifier Register */ -#define REG_USART3_WPMR (*(RwReg*)0x400A40E4U) /**< \brief (USART3) Write Protect Mode Register */ -#define REG_USART3_WPSR (*(RoReg*)0x400A40E8U) /**< \brief (USART3) Write Protect Status Register */ -#define REG_USART3_RPR (*(RwReg*)0x400A4100U) /**< \brief (USART3) Receive Pointer Register */ -#define REG_USART3_RCR (*(RwReg*)0x400A4104U) /**< \brief (USART3) Receive Counter Register */ -#define REG_USART3_TPR (*(RwReg*)0x400A4108U) /**< \brief (USART3) Transmit Pointer Register */ -#define REG_USART3_TCR (*(RwReg*)0x400A410CU) /**< \brief (USART3) Transmit Counter Register */ -#define REG_USART3_RNPR (*(RwReg*)0x400A4110U) /**< \brief (USART3) Receive Next Pointer Register */ -#define REG_USART3_RNCR (*(RwReg*)0x400A4114U) /**< \brief (USART3) Receive Next Counter Register */ -#define REG_USART3_TNPR (*(RwReg*)0x400A4118U) /**< \brief (USART3) Transmit Next Pointer Register */ -#define REG_USART3_TNCR (*(RwReg*)0x400A411CU) /**< \brief (USART3) Transmit Next Counter Register */ -#define REG_USART3_PTCR (*(WoReg*)0x400A4120U) /**< \brief (USART3) Transfer Control Register */ -#define REG_USART3_PTSR (*(RoReg*)0x400A4124U) /**< \brief (USART3) Transfer Status Register */ -#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ - -#endif /* _SAM3XA_USART3_INSTANCE_ */ |