diff options
Diffstat (limited to 'lib/cmsis-sam3x8e/include/instance/instance_tc2.h')
| -rw-r--r-- | lib/cmsis-sam3x8e/include/instance/instance_tc2.h | 120 |
1 files changed, 0 insertions, 120 deletions
diff --git a/lib/cmsis-sam3x8e/include/instance/instance_tc2.h b/lib/cmsis-sam3x8e/include/instance/instance_tc2.h deleted file mode 100644 index 5846918a..00000000 --- a/lib/cmsis-sam3x8e/include/instance/instance_tc2.h +++ /dev/null @@ -1,120 +0,0 @@ -/* ---------------------------------------------------------------------------- - * SAM Software Package License - * ---------------------------------------------------------------------------- - * Copyright (c) 2012, Atmel Corporation - * - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following condition is met: - * - * - Redistributions of source code must retain the above copyright notice, - * this list of conditions and the disclaimer below. - * - * Atmel's name may not be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE - * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, - * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * ---------------------------------------------------------------------------- - */ - -#ifndef _SAM3XA_TC2_INSTANCE_ -#define _SAM3XA_TC2_INSTANCE_ - -/* ========== Register definition for TC2 peripheral ========== */ -#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) -#define REG_TC2_CCR0 (0x40088000U) /**< \brief (TC2) Channel Control Register (channel = 0) */ -#define REG_TC2_CMR0 (0x40088004U) /**< \brief (TC2) Channel Mode Register (channel = 0) */ -#define REG_TC2_SMMR0 (0x40088008U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 0) */ -#define REG_TC2_CV0 (0x40088010U) /**< \brief (TC2) Counter Value (channel = 0) */ -#define REG_TC2_RA0 (0x40088014U) /**< \brief (TC2) Register A (channel = 0) */ -#define REG_TC2_RB0 (0x40088018U) /**< \brief (TC2) Register B (channel = 0) */ -#define REG_TC2_RC0 (0x4008801CU) /**< \brief (TC2) Register C (channel = 0) */ -#define REG_TC2_SR0 (0x40088020U) /**< \brief (TC2) Status Register (channel = 0) */ -#define REG_TC2_IER0 (0x40088024U) /**< \brief (TC2) Interrupt Enable Register (channel = 0) */ -#define REG_TC2_IDR0 (0x40088028U) /**< \brief (TC2) Interrupt Disable Register (channel = 0) */ -#define REG_TC2_IMR0 (0x4008802CU) /**< \brief (TC2) Interrupt Mask Register (channel = 0) */ -#define REG_TC2_CCR1 (0x40088040U) /**< \brief (TC2) Channel Control Register (channel = 1) */ -#define REG_TC2_CMR1 (0x40088044U) /**< \brief (TC2) Channel Mode Register (channel = 1) */ -#define REG_TC2_SMMR1 (0x40088048U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 1) */ -#define REG_TC2_CV1 (0x40088050U) /**< \brief (TC2) Counter Value (channel = 1) */ -#define REG_TC2_RA1 (0x40088054U) /**< \brief (TC2) Register A (channel = 1) */ -#define REG_TC2_RB1 (0x40088058U) /**< \brief (TC2) Register B (channel = 1) */ -#define REG_TC2_RC1 (0x4008805CU) /**< \brief (TC2) Register C (channel = 1) */ -#define REG_TC2_SR1 (0x40088060U) /**< \brief (TC2) Status Register (channel = 1) */ -#define REG_TC2_IER1 (0x40088064U) /**< \brief (TC2) Interrupt Enable Register (channel = 1) */ -#define REG_TC2_IDR1 (0x40088068U) /**< \brief (TC2) Interrupt Disable Register (channel = 1) */ -#define REG_TC2_IMR1 (0x4008806CU) /**< \brief (TC2) Interrupt Mask Register (channel = 1) */ -#define REG_TC2_CCR2 (0x40088080U) /**< \brief (TC2) Channel Control Register (channel = 2) */ -#define REG_TC2_CMR2 (0x40088084U) /**< \brief (TC2) Channel Mode Register (channel = 2) */ -#define REG_TC2_SMMR2 (0x40088088U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 2) */ -#define REG_TC2_CV2 (0x40088090U) /**< \brief (TC2) Counter Value (channel = 2) */ -#define REG_TC2_RA2 (0x40088094U) /**< \brief (TC2) Register A (channel = 2) */ -#define REG_TC2_RB2 (0x40088098U) /**< \brief (TC2) Register B (channel = 2) */ -#define REG_TC2_RC2 (0x4008809CU) /**< \brief (TC2) Register C (channel = 2) */ -#define REG_TC2_SR2 (0x400880A0U) /**< \brief (TC2) Status Register (channel = 2) */ -#define REG_TC2_IER2 (0x400880A4U) /**< \brief (TC2) Interrupt Enable Register (channel = 2) */ -#define REG_TC2_IDR2 (0x400880A8U) /**< \brief (TC2) Interrupt Disable Register (channel = 2) */ -#define REG_TC2_IMR2 (0x400880ACU) /**< \brief (TC2) Interrupt Mask Register (channel = 2) */ -#define REG_TC2_BCR (0x400880C0U) /**< \brief (TC2) Block Control Register */ -#define REG_TC2_BMR (0x400880C4U) /**< \brief (TC2) Block Mode Register */ -#define REG_TC2_QIER (0x400880C8U) /**< \brief (TC2) QDEC Interrupt Enable Register */ -#define REG_TC2_QIDR (0x400880CCU) /**< \brief (TC2) QDEC Interrupt Disable Register */ -#define REG_TC2_QIMR (0x400880D0U) /**< \brief (TC2) QDEC Interrupt Mask Register */ -#define REG_TC2_QISR (0x400880D4U) /**< \brief (TC2) QDEC Interrupt Status Register */ -#define REG_TC2_FMR (0x400880D8U) /**< \brief (TC2) Fault Mode Register */ -#define REG_TC2_WPMR (0x400880E4U) /**< \brief (TC2) Write Protect Mode Register */ -#else -#define REG_TC2_CCR0 (*(WoReg*)0x40088000U) /**< \brief (TC2) Channel Control Register (channel = 0) */ -#define REG_TC2_CMR0 (*(RwReg*)0x40088004U) /**< \brief (TC2) Channel Mode Register (channel = 0) */ -#define REG_TC2_SMMR0 (*(RwReg*)0x40088008U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 0) */ -#define REG_TC2_CV0 (*(RoReg*)0x40088010U) /**< \brief (TC2) Counter Value (channel = 0) */ -#define REG_TC2_RA0 (*(RwReg*)0x40088014U) /**< \brief (TC2) Register A (channel = 0) */ -#define REG_TC2_RB0 (*(RwReg*)0x40088018U) /**< \brief (TC2) Register B (channel = 0) */ -#define REG_TC2_RC0 (*(RwReg*)0x4008801CU) /**< \brief (TC2) Register C (channel = 0) */ -#define REG_TC2_SR0 (*(RoReg*)0x40088020U) /**< \brief (TC2) Status Register (channel = 0) */ -#define REG_TC2_IER0 (*(WoReg*)0x40088024U) /**< \brief (TC2) Interrupt Enable Register (channel = 0) */ -#define REG_TC2_IDR0 (*(WoReg*)0x40088028U) /**< \brief (TC2) Interrupt Disable Register (channel = 0) */ -#define REG_TC2_IMR0 (*(RoReg*)0x4008802CU) /**< \brief (TC2) Interrupt Mask Register (channel = 0) */ -#define REG_TC2_CCR1 (*(WoReg*)0x40088040U) /**< \brief (TC2) Channel Control Register (channel = 1) */ -#define REG_TC2_CMR1 (*(RwReg*)0x40088044U) /**< \brief (TC2) Channel Mode Register (channel = 1) */ -#define REG_TC2_SMMR1 (*(RwReg*)0x40088048U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 1) */ -#define REG_TC2_CV1 (*(RoReg*)0x40088050U) /**< \brief (TC2) Counter Value (channel = 1) */ -#define REG_TC2_RA1 (*(RwReg*)0x40088054U) /**< \brief (TC2) Register A (channel = 1) */ -#define REG_TC2_RB1 (*(RwReg*)0x40088058U) /**< \brief (TC2) Register B (channel = 1) */ -#define REG_TC2_RC1 (*(RwReg*)0x4008805CU) /**< \brief (TC2) Register C (channel = 1) */ -#define REG_TC2_SR1 (*(RoReg*)0x40088060U) /**< \brief (TC2) Status Register (channel = 1) */ -#define REG_TC2_IER1 (*(WoReg*)0x40088064U) /**< \brief (TC2) Interrupt Enable Register (channel = 1) */ -#define REG_TC2_IDR1 (*(WoReg*)0x40088068U) /**< \brief (TC2) Interrupt Disable Register (channel = 1) */ -#define REG_TC2_IMR1 (*(RoReg*)0x4008806CU) /**< \brief (TC2) Interrupt Mask Register (channel = 1) */ -#define REG_TC2_CCR2 (*(WoReg*)0x40088080U) /**< \brief (TC2) Channel Control Register (channel = 2) */ -#define REG_TC2_CMR2 (*(RwReg*)0x40088084U) /**< \brief (TC2) Channel Mode Register (channel = 2) */ -#define REG_TC2_SMMR2 (*(RwReg*)0x40088088U) /**< \brief (TC2) Stepper Motor Mode Register (channel = 2) */ -#define REG_TC2_CV2 (*(RoReg*)0x40088090U) /**< \brief (TC2) Counter Value (channel = 2) */ -#define REG_TC2_RA2 (*(RwReg*)0x40088094U) /**< \brief (TC2) Register A (channel = 2) */ -#define REG_TC2_RB2 (*(RwReg*)0x40088098U) /**< \brief (TC2) Register B (channel = 2) */ -#define REG_TC2_RC2 (*(RwReg*)0x4008809CU) /**< \brief (TC2) Register C (channel = 2) */ -#define REG_TC2_SR2 (*(RoReg*)0x400880A0U) /**< \brief (TC2) Status Register (channel = 2) */ -#define REG_TC2_IER2 (*(WoReg*)0x400880A4U) /**< \brief (TC2) Interrupt Enable Register (channel = 2) */ -#define REG_TC2_IDR2 (*(WoReg*)0x400880A8U) /**< \brief (TC2) Interrupt Disable Register (channel = 2) */ -#define REG_TC2_IMR2 (*(RoReg*)0x400880ACU) /**< \brief (TC2) Interrupt Mask Register (channel = 2) */ -#define REG_TC2_BCR (*(WoReg*)0x400880C0U) /**< \brief (TC2) Block Control Register */ -#define REG_TC2_BMR (*(RwReg*)0x400880C4U) /**< \brief (TC2) Block Mode Register */ -#define REG_TC2_QIER (*(WoReg*)0x400880C8U) /**< \brief (TC2) QDEC Interrupt Enable Register */ -#define REG_TC2_QIDR (*(WoReg*)0x400880CCU) /**< \brief (TC2) QDEC Interrupt Disable Register */ -#define REG_TC2_QIMR (*(RoReg*)0x400880D0U) /**< \brief (TC2) QDEC Interrupt Mask Register */ -#define REG_TC2_QISR (*(RoReg*)0x400880D4U) /**< \brief (TC2) QDEC Interrupt Status Register */ -#define REG_TC2_FMR (*(RwReg*)0x400880D8U) /**< \brief (TC2) Fault Mode Register */ -#define REG_TC2_WPMR (*(RwReg*)0x400880E4U) /**< \brief (TC2) Write Protect Mode Register */ -#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ - -#endif /* _SAM3XA_TC2_INSTANCE_ */ |