diff options
Diffstat (limited to 'klippy/stepper.py')
| -rw-r--r-- | klippy/stepper.py | 16 |
1 files changed, 6 insertions, 10 deletions
diff --git a/klippy/stepper.py b/klippy/stepper.py index ffafb395..6bec852a 100644 --- a/klippy/stepper.py +++ b/klippy/stepper.py @@ -38,14 +38,12 @@ class PrinterStepper: 2. * self.step_dist, max_halt_velocity, max_accel) min_stop_interval = second_last_step_time - last_step_time self.mcu_stepper.setup_min_stop_interval(min_stop_interval) - def motor_enable(self, move_time, enable=0): + def motor_enable(self, print_time, enable=0): if enable and self.need_motor_enable: - mcu_time = self.mcu_stepper.print_to_mcu_time(move_time) - self.mcu_stepper.reset_step_clock(mcu_time) + self.mcu_stepper.reset_step_clock(print_time) if (self.mcu_enable is not None and self.mcu_enable.get_last_setting() != enable): - mcu_time = self.mcu_enable.get_mcu().print_to_mcu_time(move_time) - self.mcu_enable.set_digital(mcu_time, enable) + self.mcu_enable.set_digital(print_time, enable) self.need_motor_enable = not enable class PrinterHomingStepper(PrinterStepper): @@ -97,13 +95,11 @@ class PrinterHomingStepper(PrinterStepper): self.homing_stepper_phases = None if self.mcu_endstop.get_mcu().is_fileoutput(): self.homing_endstop_accuracy = self.homing_stepper_phases - def enable_endstop_checking(self, move_time, step_time): - mcu_time = self.mcu_endstop.get_mcu().print_to_mcu_time(move_time) - self.mcu_endstop.home_start(mcu_time, step_time) + def enable_endstop_checking(self, print_time, step_time): + self.mcu_endstop.home_start(print_time, step_time) return self.mcu_endstop def query_endstop(self, print_time): - mcu_time = self.mcu_endstop.get_mcu().print_to_mcu_time(print_time) - self.mcu_endstop.query_endstop(mcu_time) + self.mcu_endstop.query_endstop(print_time) return self.mcu_endstop def get_homing_speed(self): # Round the configured homing speed so that it is an even |