diff options
Diffstat (limited to 'klippy/extras/temperature_probe.py')
| -rw-r--r-- | klippy/extras/temperature_probe.py | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/klippy/extras/temperature_probe.py b/klippy/extras/temperature_probe.py index 05eac34e..c480ddae 100644 --- a/klippy/extras/temperature_probe.py +++ b/klippy/extras/temperature_probe.py @@ -408,7 +408,7 @@ class TemperatureProbe: except self.printer.command_error: self._finalize_drift_cal(False, "Error during initial move") raise - # Caputure start position and begin initial probe + # Capture start position and begin initial probe toolhead = self.printer.lookup_object("toolhead") self.start_pos = toolhead.get_position()[:2] manual_probe.ManualProbeHelper( @@ -637,7 +637,7 @@ class EddyDriftCompensation: gcode = self.printer.lookup_object("gcode") if len(cal_samples) < 3: raise gcode.error( - "calbration error, not enough samples" + "calibration error, not enough samples" ) min_temp, _ = cal_samples[0][0] max_temp, _ = cal_samples[-1][0] @@ -687,7 +687,7 @@ class EddyDriftCompensation: return self._calc_freq(freq, origin_temp, self.cal_temp) def unadjust_freq(self, freq, dest_temp=None): - # Given a frequency and its orignal sampled temp, find the + # Given a frequency and its original sampled temp, find the # offset frequency based on the current temp if not self.enabled or freq < self.min_freq: return freq @@ -703,7 +703,7 @@ class EddyDriftCompensation: low_freq = poly(origin_temp) if freq >= low_freq: if high_freq is None: - # Freqency above max calibration value + # Frequency above max calibration value err = poly(dest_temp) - low_freq return freq + err t = min(1., max(0., (freq - low_freq) / (high_freq - low_freq))) |