diff options
Diffstat (limited to 'klippy/extras/probe.py')
| -rw-r--r-- | klippy/extras/probe.py | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/klippy/extras/probe.py b/klippy/extras/probe.py index 47ea7d73..3c27e73b 100644 --- a/klippy/extras/probe.py +++ b/klippy/extras/probe.py @@ -26,10 +26,11 @@ class PrinterProbe: self.z_position = pconfig.getfloat('minimum_z_position', 0.) # Create an "endstop" object to handle the probe pin ppins = self.printer.lookup_object('pins') - pin_params = ppins.lookup_pin('endstop', config.get('pin')) + pin = config.get('pin') + pin_params = ppins.lookup_pin(pin, can_invert=True, can_pullup=True) mcu = pin_params['chip'] mcu.add_config_object(self) - self.mcu_probe = mcu.setup_pin(pin_params) + self.mcu_probe = mcu.setup_pin('endstop', pin_params) if (config.get('activate_gcode', None) is not None or config.get('deactivate_gcode', None) is not None): self.mcu_probe = ProbeEndstopWrapper(config, self.mcu_probe) @@ -46,9 +47,8 @@ class PrinterProbe: kin = self.printer.lookup_object('toolhead').get_kinematics() for stepper in kin.get_steppers('Z'): stepper.add_to_endstop(self.mcu_probe) - def setup_pin(self, pin_params): - if (pin_params['pin'] != 'z_virtual_endstop' - or pin_params['type'] != 'endstop'): + def setup_pin(self, pin_type, pin_params): + if pin_type != 'endstop' or pin_params['pin'] != 'z_virtual_endstop': raise pins.error("Probe virtual endstop only useful as endstop pin") if pin_params['invert'] or pin_params['pullup']: raise pins.error("Can not pullup/invert probe virtual endstop") |