1 files changed, 17 insertions, 17 deletions
diff --git a/klippy/extras/display/menu.cfg b/klippy/extras/display/menu.cfg
index 83cd44e8..add22e62 100644
--- a/klippy/extras/display/menu.cfg
+++ b/klippy/extras/display/menu.cfg
@@ -391,15 +391,15 @@ items:
 
 [menu __temp __hotend0_current]
 type: item
-enable: extruder0.is_enabled
+enable: extruder.is_enabled
 name: "Ex0:{0:4.0f} T"
-parameter: extruder0.temperature
+parameter: extruder.temperature
 
 [menu __temp __hotend0_target]
 type: input
-enable: extruder0.is_enabled
+enable: extruder.is_enabled
 name: "{0:4.0f}"
-parameter: extruder0.target
+parameter: extruder.target
 input_min: 0
 input_max: 250
 input_step: 1
@@ -450,7 +450,7 @@ items:
 
 [menu __temp __preheat_pla __all]
 type: command
-enable: extruder0.is_enabled,heater_bed.is_enabled
+enable: extruder.is_enabled,heater_bed.is_enabled
 name: Preheat all
 gcode:
     M140 S60
@@ -458,7 +458,7 @@ gcode:
 
 [menu __temp __preheat_pla __hotend]
 type: command
-enable: extruder0.is_enabled
+enable: extruder.is_enabled
 name: Preheat hotend
 gcode: M104 S200
 
@@ -478,7 +478,7 @@ items:
 
 [menu __temp __preheat_abs __all]
 type: command
-enable: extruder0.is_enabled,heater_bed.is_enabled
+enable: extruder.is_enabled,heater_bed.is_enabled
 name: Preheat all
 gcode:
     M140 S110
@@ -486,7 +486,7 @@ gcode:
 
 [menu __temp __preheat_abs __hotend]
 type: command
-enable: extruder0.is_enabled
+enable: extruder.is_enabled
 name: Preheat hotend
 gcode: M104 S245
 
@@ -506,7 +506,7 @@ items:
 
 [menu __temp __cooldown __all]
 type: command
-enable: extruder0.is_enabled,heater_bed.is_enabled
+enable: extruder.is_enabled,heater_bed.is_enabled
 name: Cooldown all
 gcode:
     M104 S0
@@ -514,7 +514,7 @@ gcode:
 
 [menu __temp __cooldown __hotend]
 type: command
-enable: extruder0.is_enabled
+enable: extruder.is_enabled
 name: Cooldown hotend
 gcode: M104 S0
 
@@ -611,7 +611,7 @@ gcode: PROBE
 
 [menu __prepare __hotend_pid_tuning]
 type: command
-enable: !toolhead.is_printing, extruder0.is_enabled
+enable: !toolhead.is_printing, extruder.is_enabled
 name: Tune Hotend PID
 gcode: PID_CALIBRATE HEATER=extruder TARGET=210 WRITE_FILE=1
 
@@ -821,23 +821,23 @@ items:
 
 [menu __card_hotend0_current]
 type: item
-enable: extruder0.is_enabled
+enable: extruder.is_enabled
 name: "{1:3.0f}"
-parameter: extruder0.temperature
+parameter: extruder.temperature
 transform: abs()
 
 [menu __card_hotend0_target]
 type: item
-enable: extruder0.is_enabled
+enable: extruder.is_enabled
 name: "{1:3.0f}"
-parameter: extruder0.target
+parameter: extruder.target
 transform: abs()
 
 [menu __card_hotend0_target_in]
 type: input
-enable: extruder0.is_enabled
+enable: extruder.is_enabled
 name: "{1:3.0f}"
-parameter: extruder0.target
+parameter: extruder.target
 transform: abs()
 input_min: 0
 input_max: 250