1 files changed, 13 insertions, 13 deletions
diff --git a/klippy/extras/display/menu.cfg b/klippy/extras/display/menu.cfg
index 8ac61c4e..77009a1d 100644
--- a/klippy/extras/display/menu.cfg
+++ b/klippy/extras/display/menu.cfg
@@ -96,7 +96,7 @@ name: Tune
 [menu __main __tune __speed]
 type: input
 name: Speed: {'%3d' % (menu.input*100)}%
-input: {printer.gcode.speed_factor}
+input: {printer.gcode_move.speed_factor}
 input_min: 0
 input_max: 2
 input_step: 0.01
@@ -107,7 +107,7 @@ gcode:
 [menu __main __tune __flow]
 type: input
 name: Flow: {'%3d' % (menu.input*100)}%
-input: {printer.gcode.extrude_factor}
+input: {printer.gcode_move.extrude_factor}
 input_min: 0
 input_max: 2
 input_step: 0.01
@@ -118,7 +118,7 @@ gcode:
 [menu __main __tune __offsetz]
 type: input
 name: Offset Z:{'%05.3f' % menu.input}
-input: {printer.gcode.homing_origin.z}
+input: {printer.gcode_move.homing_origin.z}
 input_min: -5
 input_max: 5
 input_step: 0.005
@@ -260,7 +260,7 @@ name: Move 10mm
 [menu __main __control __move_10mm __axis_x]
 type: input
 name: Move X:{'%05.1f' % menu.input}
-input: {printer.gcode.gcode_position.x}
+input: {printer.gcode_move.gcode_position.x}
 input_min: 0
 input_max: 200
 input_step: 10.0
@@ -273,7 +273,7 @@ gcode:
 [menu __main __control __move_10mm __axis_y]
 type: input
 name: Move Y:{'%05.1f' % menu.input}
-input: {printer.gcode.gcode_position.y}
+input: {printer.gcode_move.gcode_position.y}
 input_min: 0
 input_max: 200
 input_step: 10.0
@@ -287,7 +287,7 @@ gcode:
 type: input
 enable: {not printer.idle_timeout.state == "Printing"}
 name: Move Z:{'%05.1f' % menu.input}
-input: {printer.gcode.gcode_position.z}
+input: {printer.gcode_move.gcode_position.z}
 input_min: 0
 input_max: 200
 input_step: 10.0
@@ -320,7 +320,7 @@ name: Move 1mm
 [menu __main __control __move_1mm __axis_x]
 type: input
 name: Move X:{'%05.1f' % menu.input}
-input: {printer.gcode.gcode_position.x}
+input: {printer.gcode_move.gcode_position.x}
 input_min: 0
 input_max: 200
 input_step: 1.0
@@ -333,7 +333,7 @@ gcode:
 [menu __main __control __move_1mm __axis_y]
 type: input
 name: Move Y:{'%05.1f' % menu.input}
-input: {printer.gcode.gcode_position.y}
+input: {printer.gcode_move.gcode_position.y}
 input_min: 0
 input_max: 200
 input_step: 1.0
@@ -347,7 +347,7 @@ gcode:
 type: input
 enable: {not printer.idle_timeout.state == "Printing"}
 name: Move Z:{'%05.1f' % menu.input}
-input: {printer.gcode.gcode_position.z}
+input: {printer.gcode_move.gcode_position.z}
 input_min: 0
 input_max: 200
 input_step: 1.0
@@ -380,7 +380,7 @@ name: Move 0.1mm
 [menu __main __control __move_01mm __axis_x]
 type: input
 name: Move X:{'%05.1f' % menu.input}
-input: {printer.gcode.gcode_position.x}
+input: {printer.gcode_move.gcode_position.x}
 input_min: 0
 input_max: 200
 input_step: 0.1
@@ -393,7 +393,7 @@ gcode:
 [menu __main __control __move_01mm __axis_y]
 type: input
 name: Move Y:{'%05.1f' % menu.input}
-input: {printer.gcode.gcode_position.y}
+input: {printer.gcode_move.gcode_position.y}
 input_min: 0
 input_max: 200
 input_step: 0.1
@@ -407,7 +407,7 @@ gcode:
 type: input
 enable: {not printer.idle_timeout.state == "Printing"}
 name: Move Z:{'%05.1f' % menu.input}
-input: {printer.gcode.gcode_position.z}
+input: {printer.gcode_move.gcode_position.z}
 input_min: 0
 input_max: 200
 input_step: 0.1
@@ -677,7 +677,7 @@ gcode:
 [menu __main __setup __calib __delta_calib_man __move_z]
 type: input
 name: Move Z: {'%03.2f' % menu.input}
-input: {printer.gcode.gcode_position.z}
+input: {printer.gcode_move.gcode_position.z}
 input_step: 1
 realtime: True
 gcode: