diff options
Diffstat (limited to 'klippy/corexy.py')
| -rw-r--r-- | klippy/corexy.py | 28 |
1 files changed, 14 insertions, 14 deletions
diff --git a/klippy/corexy.py b/klippy/corexy.py index 0bbbf910..b92e2672 100644 --- a/klippy/corexy.py +++ b/klippy/corexy.py @@ -67,17 +67,17 @@ class CoreXYKinematics: # Support endstop phase detection on Z axis coord[axis] = s.position_endstop + s.get_homed_offset() homing_state.set_homed_position(coord) - def motor_off(self, move_time): + def motor_off(self, print_time): self.limits = [(1.0, -1.0)] * 3 for stepper in self.steppers: - stepper.motor_enable(move_time, 0) + stepper.motor_enable(print_time, 0) self.need_motor_enable = True - def _check_motor_enable(self, move_time, move): + def _check_motor_enable(self, print_time, move): if move.axes_d[0] or move.axes_d[1]: - self.steppers[0].motor_enable(move_time, 1) - self.steppers[1].motor_enable(move_time, 1) + self.steppers[0].motor_enable(print_time, 1) + self.steppers[1].motor_enable(print_time, 1) if move.axes_d[2]: - self.steppers[2].motor_enable(move_time, 1) + self.steppers[2].motor_enable(print_time, 1) need_motor_enable = False for i in StepList: need_motor_enable |= self.steppers[i].need_motor_enable @@ -109,9 +109,9 @@ class CoreXYKinematics: z_ratio = move.move_d / abs(move.axes_d[2]) move.limit_speed( self.max_z_velocity * z_ratio, self.max_z_accel * z_ratio) - def move(self, move_time, move): + def move(self, print_time, move): if self.need_motor_enable: - self._check_motor_enable(move_time, move) + self._check_motor_enable(print_time, move) sxp = move.start_pos[0] syp = move.start_pos[1] move_start_pos = (sxp + syp, sxp - syp, move.start_pos[2]) @@ -124,7 +124,7 @@ class CoreXYKinematics: if not axis_d: continue mcu_stepper = self.steppers[i].mcu_stepper - mcu_time = mcu_stepper.print_to_mcu_time(move_time) + move_time = print_time start_pos = move_start_pos[i] axis_r = abs(axis_d) / move.move_d accel = move.accel * axis_r @@ -134,18 +134,18 @@ class CoreXYKinematics: if move.accel_r: accel_d = move.accel_r * axis_d mcu_stepper.step_const( - mcu_time, start_pos, accel_d, move.start_v * axis_r, accel) + move_time, start_pos, accel_d, move.start_v * axis_r, accel) start_pos += accel_d - mcu_time += move.accel_t + move_time += move.accel_t # Cruising steps if move.cruise_r: cruise_d = move.cruise_r * axis_d mcu_stepper.step_const( - mcu_time, start_pos, cruise_d, cruise_v, 0.) + move_time, start_pos, cruise_d, cruise_v, 0.) start_pos += cruise_d - mcu_time += move.cruise_t + move_time += move.cruise_t # Deceleration steps if move.decel_r: decel_d = move.decel_r * axis_d mcu_stepper.step_const( - mcu_time, start_pos, decel_d, cruise_v, -accel) + move_time, start_pos, decel_d, cruise_v, -accel) |