diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/MCU_Commands.md | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/docs/MCU_Commands.md b/docs/MCU_Commands.md index a9483a64..f5019814 100644 --- a/docs/MCU_Commands.md +++ b/docs/MCU_Commands.md @@ -226,11 +226,11 @@ only of interest to developers looking to gain insight into Klipper. pins attached to thermistors controlling heaters - it can be used to check that a heater is within a temperature range. -* `get_status` : This command causes the micro-controller to generate - a "status" response message. The host sends this command once a - second to obtain the value of the micro-controller clock and to - estimate the drift between host and micro-controller clocks. It - enables the host to accurately estimate the micro-controller clock. +* `get_clock` : This command causes the micro-controller to generate a + "clock" response message. The host sends this command once a second + to obtain the value of the micro-controller clock and to estimate + the drift between host and micro-controller clocks. It enables the + host to accurately estimate the micro-controller clock. Stepper commands ---------------- |