diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Config_Reference.md | 32 |
1 files changed, 29 insertions, 3 deletions
diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index d73a3a64..6a5a7582 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -4139,15 +4139,16 @@ Support for a display attached to the micro-controller. [display] lcd_type: # The type of LCD chip in use. This may be "hd44780", "hd44780_spi", -# "st7920", "emulated_st7920", "uc1701", "ssd1306", or "sh1106". +# "aip31068_spi", "st7920", "emulated_st7920", "uc1701", "ssd1306", or +# "sh1106". # See the display sections below for information on each type and # additional parameters they provide. This parameter must be # provided. #display_group: # The name of the display_data group to show on the display. This # controls the content of the screen (see the "display_data" section -# for more information). The default is _default_20x4 for hd44780 -# displays and _default_16x4 for other displays. +# for more information). The default is _default_20x4 for hd44780 or +# aip31068_spi displays and _default_16x4 for other displays. #menu_timeout: # Timeout for menu. Being inactive this amount of seconds will # trigger menu exit or return to root menu when having autorun @@ -4273,6 +4274,31 @@ spi_software_miso_pin: ... ``` +#### aip31068_spi display + +Information on configuring an aip31068_spi display - a very similar to hd44780_spi +a 20x04 (20 symbols by 4 lines) display with slightly different internal +protocol. + +``` +[display] +lcd_type: aip31068_spi +latch_pin: +spi_software_sclk_pin: +spi_software_mosi_pin: +spi_software_miso_pin: +# The pins connected to the shift register controlling the display. +# The spi_software_miso_pin needs to be set to an unused pin of the +# printer mainboard as the shift register does not have a MISO pin, +# but the software spi implementation requires this pin to be +# configured. +#line_length: +# Set the number of characters per line for an hd44780 type lcd. +# Possible values are 20 (default) and 16. The number of lines is +# fixed to 4. +... +``` + #### st7920 display Information on configuring st7920 displays (which is used in |