diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/G-Codes.md | 14 |
1 files changed, 14 insertions, 0 deletions
diff --git a/docs/G-Codes.md b/docs/G-Codes.md index afa808c8..fb9e4a7a 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -746,6 +746,20 @@ scheduled to run after the stepper move completes, however if a manual stepper move uses SYNC=0 then future G-Code movement commands may run in parallel with the stepper movement. +### [mcp4018] + +The following command is available when a +[mcp4018 config section](Config_Reference.md#mcp4018) is +enabled. + +#### SET_DIGIPOT + +`SET_DIGIPOT DIGIPOT=config_name WIPER=<value>`: This command will +change the current value of the digipot. This value should typically +be between 0.0 and 1.0, unless a 'scale' is defined in the config. +When 'scale' is defined, then this value should be between 0.0 and +'scale'. + ### [led] The following command is available when any of the |