diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Installation.md | 7 |
1 files changed, 4 insertions, 3 deletions
diff --git a/docs/Installation.md b/docs/Installation.md index 8f897ec5..76c74f76 100644 --- a/docs/Installation.md +++ b/docs/Installation.md @@ -17,7 +17,7 @@ Raspberry Pi computer. Use OctoPi v0.14.0 or later - see the [octopi releases](https://github.com/guysoft/OctoPi/releases) for release information. One should verify that OctoPi boots and that the OctoPrint web server works. After connecting to the OctoPrint web -page, follow the prompt to upgrade OctoPrint to v1.3.5 or later. +page, follow the prompt to upgrade OctoPrint to v1.3.7 or later. After installing OctoPi and upgrading OctoPrint, it will be necessary to ssh into the target machine to run a handful of system commands. If @@ -84,8 +84,9 @@ Under "Serial Connection" in "Additional serial ports" add "/tmp/printer". Then click "Save". Enter the Settings tab again and under "Serial Connection" change the -"Serial Port" setting to "/tmp/printer". Unselect the "Not only cancel -ongoing prints but also disconnect..." checkbox. Click "Save". +"Serial Port" setting to "/tmp/printer". Navigate to the "Behavior" +sub-tab and select the "Cancel any ongoing prints but stay connected +to the printer" option. Click "Save". From the main page, under the "Connection" section (at the top left of the page) make sure the "Serial Port" is set to "/tmp/printer" and |