diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Measuring_Resonances.md | 12 |
1 files changed, 10 insertions, 2 deletions
diff --git a/docs/Measuring_Resonances.md b/docs/Measuring_Resonances.md index d5f7f54c..81c2eb96 100644 --- a/docs/Measuring_Resonances.md +++ b/docs/Measuring_Resonances.md @@ -212,12 +212,20 @@ sudo apt install python3-numpy python3-matplotlib libatlas-base-dev libopenblas- Next, in order to install NumPy in the Klipper environment, run the command: ``` -~/klippy-env/bin/pip install -v numpy +~/klippy-env/bin/pip install -v "numpy<1.26" ``` Note that, depending on the performance of the CPU, it may take *a lot* of time, up to 10-20 minutes. Be patient and wait for the completion of the installation. On some occasions, if the board has too little RAM -the installation may fail and you will need to enable swap. +the installation may fail and you will need to enable swap. Also note +the forced version, due to newer versions of NumPY having requirements +that may not be satisfied in some klipper python environments. + +Once installed please check that no errors show from the command: +``` +~/klippy-env/bin/python -c 'import numpy;' +``` +The correct output should simply be a new line. #### Configure ADXL345 With RPi |