diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/G-Codes.md | 14 |
1 files changed, 14 insertions, 0 deletions
diff --git a/docs/G-Codes.md b/docs/G-Codes.md index f855f364..63c84f56 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -476,6 +476,20 @@ enabled. `SET_FAN_SPEED FAN=config_name SPEED=<speed>` This command sets the speed of a fan. "speed" must be between 0.0 and 1.0. +`SET_FAN_SPEED PIN=config_name TEMPLATE=<template_name> +[<param_x>=<literal>]`: If `TEMPLATE` is specified then it assigns a +[display_template](Config_Reference.md#display_template) to the given +fan. For example, if one defined a `[display_template +my_fan_template]` config section then one could assign +`TEMPLATE=my_fan_template` here. The display_template should produce a +string containing a floating point number with the desired value. The +template will be continuously evaluated and the fan will be +automatically set to the resulting speed. One may set display_template +parameters to use during template evaluation (parameters will be +parsed as Python literals). If TEMPLATE is an empty string then this +command will clear any previous template assigned to the pin (one can +then use `SET_FAN_SPEED` commands to manage the values directly). + ### [filament_switch_sensor] The following command is available when a |