diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/Config_Changes.md | 4 | ||||
| -rw-r--r-- | docs/Config_Reference.md | 5 |
2 files changed, 4 insertions, 5 deletions
diff --git a/docs/Config_Changes.md b/docs/Config_Changes.md index 87bcc971..00179192 100644 --- a/docs/Config_Changes.md +++ b/docs/Config_Changes.md @@ -8,6 +8,10 @@ All dates in this document are approximate. ## Changes +20250721: The `[pca9632]` module no longer accepts the `scl_pin` and +`sda_pin` options. Use `i2c_software_scl_pin` and +`i2c_software_sda_pin` instead. + 20250428: The maximum `cycle_time` for pwm `[output_pin]`, `[pwm_cycle_time]`, `[pwm_tool]`, and similar config sections is now 3 seconds (reduced from 5 seconds). The `maximum_mcu_duration` in diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index d9125d47..bc99bd94 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -3477,11 +3477,6 @@ PCA9632 LED support. The PCA9632 is used on the FlashForge Dreamer. #i2c_speed: # See the "common I2C settings" section for a description of the # above parameters. -#scl_pin: -#sda_pin: -# Alternatively, if the pca9632 is not connected to a hardware I2C -# bus, then one may specify the "clock" (scl_pin) and "data" -# (sda_pin) pins. The default is to use hardware I2C. #color_order: RGBW # Set the pixel order of the LED (using a string containing the # letters R, G, B, W). The default is RGBW. |