diff options
Diffstat (limited to 'docs/Probe_Calibrate.md')
| -rw-r--r-- | docs/Probe_Calibrate.md | 21 |
1 files changed, 11 insertions, 10 deletions
diff --git a/docs/Probe_Calibrate.md b/docs/Probe_Calibrate.md index de517504..fc03d929 100644 --- a/docs/Probe_Calibrate.md +++ b/docs/Probe_Calibrate.md @@ -53,14 +53,15 @@ tool. This tool will perform an automatic probe, then lift the head, move the nozzle over the location of the probe point, and start the manual -probe tool. Once the manual probe tool starts, perform the -["paper test"](Bed_Level.md#the-paper-test) to determine the actual -nozzle height at the given point. +probe tool. If the nozzle does not move to a position above the +automatic probe point, then `ABORT` the manual probe tool and perform +the XY probe offset calibration described above. -If the nozzle does not move to a position above the probe point, then -`ABORT` the manual probe tool and perform the XY probe offset -calibration described above. - -After completing the "paper test", use the `ACCEPT` command to -accept the current Z height and then use the `SAVE_CONFIG` command to -save the given probe z_offset to the config file. +Once the manual probe tool starts, follow the steps described at +["the paper test"](Bed_Level.md#the-paper-test)) to determine the +actual distance between the nozzle and bed at the given location. Once +those steps are complete one can `ACCEPT` the position and save the +results to the config file with: +``` +SAVE_CONFIG +``` |