diff options
Diffstat (limited to 'docs/G-Codes.md')
| -rw-r--r-- | docs/G-Codes.md | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/docs/G-Codes.md b/docs/G-Codes.md index 6c40ec5e..caf41f0d 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -174,8 +174,10 @@ The following commands are available when the [ADAPTIVE_MARGIN=<value>]`: This command probes the bed using generated points specified by the parameters in the config. After probing, a mesh is generated and z-movement is adjusted according to the mesh. +The mesh is immediately active after successful completion of `BED_MESH_CALIBRATE`. The mesh will be saved into a profile specified by the `PROFILE` parameter, -or `default` if unspecified. +or `default` if unspecified. If ADAPTIVE=1 is specified then the profile +name will begin with `adaptive-` and should not be saved for reuse. See the PROBE command for details on the optional probe parameters. If METHOD=manual is specified then the manual probing tool is activated - see the MANUAL_PROBE command above for details on the additional commands available |