diff options
| author | Rowland <43092584+strayr@users.noreply.github.com> | 2025-05-14 18:53:10 +0100 |
|---|---|---|
| committer | GitHub <noreply@github.com> | 2025-05-14 13:53:10 -0400 |
| commit | 82f540bb731fe4ae4575d48aefb2f837491ba4e6 (patch) | |
| tree | 680b0d2fdd02421efaf89685836e68cc7ef5ef49 /docs/G-Codes.md | |
| parent | ed36041b67e8bbbacae0710af8c4a5e4ffc030fa (diff) | |
| download | kutter-82f540bb731fe4ae4575d48aefb2f837491ba4e6.tar.gz kutter-82f540bb731fe4ae4575d48aefb2f837491ba4e6.tar.xz kutter-82f540bb731fe4ae4575d48aefb2f837491ba4e6.zip | |
docs: BED_MESH_CALIBRATE makes a mesh that is immediately available. (#6919)
The docs aren't particularly clear that if you generate a mesh in our start g-code, you can just use it without additional commands. This is causing issues with support on r/klippers
Signed-off-by: Rowland Straylight <rowlandstraylight@gmail.com>
Diffstat (limited to 'docs/G-Codes.md')
| -rw-r--r-- | docs/G-Codes.md | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/docs/G-Codes.md b/docs/G-Codes.md index 6c40ec5e..caf41f0d 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -174,8 +174,10 @@ The following commands are available when the [ADAPTIVE_MARGIN=<value>]`: This command probes the bed using generated points specified by the parameters in the config. After probing, a mesh is generated and z-movement is adjusted according to the mesh. +The mesh is immediately active after successful completion of `BED_MESH_CALIBRATE`. The mesh will be saved into a profile specified by the `PROFILE` parameter, -or `default` if unspecified. +or `default` if unspecified. If ADAPTIVE=1 is specified then the profile +name will begin with `adaptive-` and should not be saved for reuse. See the PROBE command for details on the optional probe parameters. If METHOD=manual is specified then the manual probing tool is activated - see the MANUAL_PROBE command above for details on the additional commands available |