diff options
Diffstat (limited to 'docs/G-Codes.md')
| -rw-r--r-- | docs/G-Codes.md | 6 |
1 files changed, 4 insertions, 2 deletions
diff --git a/docs/G-Codes.md b/docs/G-Codes.md index dc9b5060..72cc3fea 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -172,8 +172,10 @@ The following standard commands are supported: [SMOOTH_TIME=<pressure_advance_smooth_time>]`: Set pressure advance parameters. If EXTRUDER is not specified, it defaults to the active extruder. -- `SET_EXTRUDER_STEP_DISTANCE [EXTRUDER=<config_name>] [DISTANCE=<distance>]`: - Set a new value for the provided extruder's step_distance. Value is +- `SET_EXTRUDER_STEP_DISTANCE [EXTRUDER=<config_name>] + [DISTANCE=<distance>]`: Set a new value for the provided extruder's + "step distance". The "step distance" is + `rotation_distance/(full_steps_per_rotation*microsteps)`. Value is not retained on Klipper reset. Use with caution, small changes can result in excessive pressure between extruder and hot end. Do proper calibration steps with filament before use. If 'DISTANCE' value is |